Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAccepted-AOC | ₹2.6 L Quoted ₹12.9 L | L1 | Accepted-AOC Due to lowest rate |
| 2 | L2₹14.1 LRejected-Finance | ₹14.1 L | L2 | Rejected-Finance Due to highest rate |
| 3 | L3₹15.8 LRejected-Finance | ₹15.8 L | L3 | Rejected-Finance Due to highest rate |
| Sl No | Description | Qty | Unit | BIKRAM SINGH L3 | sunil balouria govt contractor L2 | VISHAL JAMWAL L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc.) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth including dewatering as directed by the Engineer –in-charge in all leads and lifts | 39.13 | Cum | 350 ₹13,695.50 | 400 ₹15,652 | 350 ₹13,695.50 |
| 2.00 | Providing and laying cement concrete 1:6:12 (1 cement:6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth. | 8.28 | Cum | 4,300 ₹35,604 | 4,560 ₹37,756.80 | 4,300 ₹35,604 |
| 3.00 | Random rubble masonary polygonal rubble masonary(uncoursed/brought to courses)with hard stone of approved quality in foundationand plinth levelling with upto cement concrete 1:6:12 (1 cement: 6sand: 12graded stone agg.20mm nominal size)in cement mortar 1:6(1 cement :6sand) in breast wall and retaining wall within all leads and lifts. | 22.73 | Cum | 6,700 ₹1.5 L | 7,000 ₹1.6 L | 6,700 ₹1.5 L |
| 4.00 | Brick work using common clay building bricks in super-structure above plinth level( Second class bricks).Cement Mortar 1:6(1cement, 6 sand) | 34.17 | Cum | 8,000 ₹2.7 L | 9,500 ₹3.2 L | 8,200 ₹2.8 L |
| 5.00 | Providing & Fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jkump lock jamb, beed and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5mm thick with gaurds, lock strike plate and shock as specifed and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge. | 59.47 | Rmt. | 6,000 ₹3.6 L | 350 ₹20,814.50 | 320 ₹19,030.40 |
| 6.00 | Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. 2nd class deodar wood. | 11.99 | Sqm | 350 ₹4,196.50 | 6,500 ₹77,935 | 6,000 ₹71,940 |
| 7.00Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring shuttering ,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ reinforced concrete and plain concrete work in:- | ||||||
| 7.01 | (a) Foundation,footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect. | 12.84 | Sqm | 450 ₹5,778 | 350 ₹4,494 | 300 ₹3,852 |
| 7.02 | (b) Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm in thickness. | 97.53 | Sqm | 550 ₹53,641.50 | 550 ₹53,641.50 | 450 ₹43,888.50 |
| 7.03 | (c) Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth. | 10.86 | Sqm | 650 ₹7,059 | 600 ₹6,516 | 550 ₹5,973 |
Tender Value
₹10.8 L
EMD Value
₹21,523
Closing Date
1 Oct 2024, 11:00 amClosed
Executive Engineer
Jal Shakti Division Shahpur
C/O pump house cum attendant room
2024_HPIPH_93328_1
EE/JSDS/NIT/2024-6906-55 dt.19/09/2024
Open Tender
Civil Works
180 days
Shahpur
Please refer Tender documents.
6 documents required · 6 mandatory
₹400
Executive Engineer
₹21,523
11 Mar 2026
20 Sept 2024
1 Oct 2024
20 Sept 2024
1 Oct 2024
20 Sept 2024
20 Sept 2024 - 1 Oct 2024
Amount
Excavation in foundation and trenches etc.) in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiselling/wedging out of rock/where blasting prohibited) saturated soil stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth including dewatering as directed by the Engineer –in-charge in all leads and lifts
Providing and laying cement concrete 1:6:12 (1 cement:6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth.
Random rubble masonary polygonal rubble masonary(uncoursed/brought to courses)with hard stone of approved quality in foundationand plinth levelling with upto cement concrete 1:6:12 (1 cement: 6sand: 12graded stone agg.20mm nominal size)in cement mortar 1:6(1 cement :6sand) in breast wall and retaining wall within all leads and lifts.
Brick work using common clay building bricks in super-structure above plinth level( Second class bricks).Cement Mortar 1:6(1cement, 6 sand)
Providing & Fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jkump lock jamb, beed and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel but things 2.5mm thick with gaurds, lock strike plate and shock as specifed and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge.
Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. 2nd class deodar wood.
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring shuttering ,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ reinforced concrete and plain concrete work in:-
(a) Foundation,footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect.
(b) Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm in thickness.
(c) Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth.
Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-
Foundation,footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect.
Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.
Prov.Laying Mild steel /Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level (tor steel) as per the direction of Engineer-in-Charge with in all leads and lifts.
Half brick masonary in common burnt clay building bricks in:extra for half brick masnory in super- structure above 1st floor level Cement Mortar 1:4 of Ist class brick.masonry complete within all leads and lifts.
Pointing on brick work with cement mortor 1:3 (1cement : 3 sand) Raised and Cut.
Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 ( 1cement : 3 sand ) and finished neat within all leads and lifts complete within all respect.
6 mm thick cement plaster to ceiling in CM 1:3 ( 1 cement :3 sand ) with in all leads and lifts.
15 mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) complete with in all leads and lifts.
20 mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar4 1:6(1cement:6sand) in all leads and lifts.
Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws plain grills.
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge specification 8 S.G with wire of dia 0.56 mm for doors,windows i/c bright finished black enamelled iron butt hinges with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete in all respect.
Boulder filling behind retaining wall under floor with in all leads and lifts complete in all respect.
Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement, 3 sand,6 graded stone aggregate 20 mm nominal size ) with in all leads and lifts complete in all respect.
Constructing coursed rubble hammer dressed "U" shape open surface drain with side wall 15 X 22 cm in cementy mortar 1:6 ( 1 cement, 6 sand ) and inside plastering with cement mortar 1:3 ( 1 cement, 3 sand ) i/c earth work and laying 10 cms cement concrete in 1:5;10 ( 1 cement,5 sand,10 graded stone aggregate 40 mm nominal size ) and 7.5 cms cement concrete 1:2:4 ( 1 cement,2 sand,4 graded stone aggregate 20 mm nominal size ) and finished with a floating coat of neat cement complete as per standard design with in all leads and lifts complete in all respect.
White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters.
Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.
Finishing wall with water proofing cement paint of approved brand and manufacture (two coats ) brushing to give an even shade I/c cleaning of oil,dirt,dust and other foreign matters,sand papering and knotting etc.with in all leads and lifts complete in all respect.
Providing and fixing anodised MS sliding door bolts with bolts and nuts screws etc. complete.
Providing and fixing anodised MS tower bolts ( barrel type) with screws etc. complete.
Providing ad fixing anodised MS handles with necessary screws etc. complete.
Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink.
Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white
Precast terrazzo tiles hydraulic compressed 20 mm thick with marble chips of specified size in flooring cement mortar 1:6 (1cement : 6 sand) jointed with neat cement slurry. (Dark shade)
sunil balouria govt contractor
BIKRAM SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid