Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Found Responsive |
| 2 | Rejected-Technical | Rejected-Technical Found Non-Responsive |
Updated dates
Tender Value
Refer Docs
EMD Value
₹22.5 L
Closing Date
6 Jan 2026, 5:00 pmClosed
AGM DPandC
Tripura State Electricity Corp. Ltd, Corporate Office, Bidyut Bhavan, Agartala, Tripura
Design, Supply, Construction, Installation, Testing and Commissioning of Electrical Equipment Testing Lab and Training Centre at Bishalgarh, Sephaijala District in Tripura (ADB Package A-6)
2025_TSEC1_66647_1
DGM(DPandC)/ADB/DL/TSECL/PkgV dt30.10.25
Open Tender
Electrical Works
Bishalgarh
As per Bid Document
5 documents required · 5 mandatory
₹25,000
Tripura State Electricity Corporation Ltd
₹22.5 L
Agartala
8 May 2026
30 Oct 2025
7 Jan 2026
30 Oct 2025
6 Jan 2026
28 Nov 2025
30 Oct 2025 - 13 Nov 2025
14 Nov 2025
1.5 Ton BEE 4 Star Split AC system (Reputed make)
0-400 Amps Variac with Wattmeter , Ammeter
10 Position, fully automatic, Smart / Electronic/ Electromechanical Energy Meter Testing Equipment (Meter Test Bench) including reference meter of accuracy Class 0.02, power source, meter mounting rack / scanning heads, desktop computer, software and all other accessories complete with 2.5 kVA online UPS system as per TS, complete.
Fully automatic transformer oil BDV test kit as per TS.
Partial discharge Measuring system with PD free detector/coupling capacitor as per TS.
3⅚ Digit / 6000 Count Accurate 1000 Amps DC/AC TRMS Autoranging Digital Clamp meter as per TS.
Providing & fixing 150 mm diameter MS Class ‘C’ suitable as per manufacture of di
Fully Automated digital multimeter as per TS.
Professional Electrical tool kit with 1.1kV insulation as per TS.
Secondary Injection testing kit /Relay test Kit As per TS.
1KV Handheld Digital Insulation Tester with measurement range 10 KΩ ~1000 MΩ, Continuity test range 250V/500V/1kVDC, Accuracy ±2%rdg±1dgt, provided with test leads, crocodile clips, carry case, batteries etc, for testing in complete. Protection rating IP 40 and Safety rating IEC61010-1, IEC61326-1 compliant.
30 kV Hi-Voltage Test Set (Hipot) with HV indication, supply fault / earth open interlocking & door / cabin interlocking & overload protection .
Control cable copper 2 core 1.5 sq.mm
Note: Bidder to provide rates for individual items in Row no 5. for record and use in case of variation purpose later. The Grand Total shall be carried forward to BoQ_4 Sl.2.02 of the Price bid.
Heavy duty Fork lift 2 tons capacity as per TS.
Heavy duty Fork lift 5 tons capacity as per TS.
Fully Automatic transformer test bench for testing from 33-11 / 0.433 kV, 10 - 1000 kVA distribution transformers, including PLC/Computer HMI interface/Integrated Control panel all accessories and measuring Instruments as per TS, complete
MS Office Table with Dimension (W x H x D (cm): 120 x 75 x 60) and Storage: 2 nos
6 Seater Wooden Dining Table with chairs
Height Adjustable Office chairs with W x H x D (cm): 75.6 x 88.5 - 98.5 x 75.6 Cm, Knitted fabric black upholstery
Primary Injection kit for protection testing , 0-1000 A, as per TS, complete
Al make Almirah/Shelf with double door and lock of reputed make
All in one Desktop with 24 inch FHD screen, 16 GB RAM, 512 GB SDD, i7 Intel core processor, Windows 11 OS along with all accessories like Mouse, keyboard, PCU backup and All-in-one Laserjet printer with Wifi.
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
Schedule No 2 : Plant and Mandatory Spare Parts Supplied from within the employer`s Country Instructions to Bidders: * Column 13 : EXW Price shall include all customs duties and other taxes already paid or payable on the components and raw materials used in the manufacture or assembly of the item or the customs duties and sales and other taxes already paid on previously imported items. * As per the Goods and Services (GST) Act 2017, prices in Schedule no.2 shall exclude GST. The GST shall be later added to the total contract price. * Please ensure to cross check that all items are quoted only once and Items already quoted in Schedule 1 are not quoted in this Schedule 2
NUMBER #
Supply of 11/0.433 kV 200 kVA distribution transformer including all items, accessories, poles and cables for erection of pole mounted substation as per schedule provided in TS.
1.5 Ton BEE 4 Star Split AC system (Reputed make)
We offer to design, manufacture, test, deliver, install, pre-commission, and commission in conformity with the Bidding Document the following Plant and Services: Turnkey Contract for Design, Supply, Construction, Installation, Testing and Commissioning of Electrical Equipment Testing Lab & Training Centre at Bishalgarh, Sephaijala District in Tripura
10 Position, fully automatic, Smart / Electronic/ Electromechanical Energy Meter Testing Equipment (Meter Test Bench) including reference meter of accuracy Class 0.02, power source, meter mounting rack / scanning heads, desktop computer, software and all other accessories complete with 2.5 kVA online UPS system as per TS, complete.
Fully automatic transformer oil BDV test kit as per TS.
Partial discharge Measuring system with PD free detector/coupling capacitor as per TS.
3⅚ Digit / 6000 Count Accurate 1000 Amps DC/AC TRMS Autoranging Digital Clamp meter as per TS.
Fully Automated digital multimeter as per TS.
Professional Electrical tool kit with 1.1kV insulation as per TS.
Secondary Injection testing kit /Relay test Kit As per TS.
Control cable copper 2 core 1.5 sq.mm
Note: Bidder to provide rates for individual items in Row no 5. for record and use in case of variation purpose later. The Grand Total shall be carried forward to BoQ_4 Sl.2.02 of the Price bid.
Heavy duty Fork lift 2 tons capacity as per TS.
Heavy duty Fork lift 5 tons capacity as per TS.
Single Girder Electrically efficient Overhead traveller crane (EOT) as per TS suitable for: Long travel - 18 Meters Cross travel - 12 Meters Safe Working Load: main 10 Tons
Fully Automatic transformer test bench for testing from 33-11 / 0.433 kV, 10 - 1000 kVA distribution transformers, including PLC/Computer HMI interface/Integrated Control panel all accessories and measuring Instruments as per TS, complete
Electronics & Furnitures:
20 Seater Engineered Wood Conference Table with compatible movabe arm chairs
MS Office Table with Dimension (W x H x D (cm): 120 x 75 x 60) and Storage: 2 nos
6 Seater Wooden Dining Table with chairs
Height Adjustable Office chairs with W x H x D (cm): 75.6 x 88.5 - 98.5 x 75.6 Cm, Knitted fabric black upholstery
1.5 Ton BEE 4 Star Split AC (Reputed make)
85 inch LED UHD scereen of reputed make with wifi mirroring ideal for confernece room ( 3 years extended warranty)
Minimim 40 MBPS boradband connection with unlimited data subscription for 02 years with 08 nos of mesh router/network extender including associated network fittings, cables , connectors, wiring as necessary for adequate coverage of Worskshop
Al make Almirah/Shelf with double door and lock of reputed make
All in one Desktop with 24 inch FHD screen, 16 GB RAM, 512 GB SDD, i7 Intel core processor, Windows 11 OS along with all accessories like Mouse, keyboard, PCU backup and All-in-one Laserjet printer with Wifi.
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
Schedule No. 3 : Design Services to be incurred in Employer`s Country
NUMBER #
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
Schedule No. 4 - Installation & Other Services Instructions to Bidders: * As per the Goods and Services (GST) Act 2017, prices in Schedule No. 4 shall exclude GST . The GST amount shall be later added to the total contract price. * This schedule shall include expenses for installation, testing and commisiong inclduing local transportation, loading / unloading, insurance, temporary storage, implementing environmental managment plan (EMP) and any other incidental costs.
NUMBER #
Provision of qualified staff for operation and management of the test facility and providing on-the-job training to nominated TSECL staff over a period of 6 months after commissioning,
Fully Automatic distribution transformer test bench
10 position fully automatic meter testing equipment
Fully automatic transformer oil BDV test kit as per TS.
Pole mounted substation with 200 KVA DTR
Review of structural designs and drawing and updated schedule of quantities, Conduct geotechnical investigations as reuired Prepare detailed drawings for civil and MEP works, and Prepare equipment / site layout diagrams for approval.
GRAND TOTAL
Edges of slabs and breaks in floors and walls under 20 cm. wide
Installation, Testing and commissioning of EOT
NABL Accreditation
Managing NABL accreditation process for the test facility including application processing, documentation, assessments, audits and final certification.
Training
Provision of training on all test equipment and detailed hands on training on Transformer Test Bench and Meter Test Bench as per approved Training Plan
Civil Works
BoQ_Ver3.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE - ABSTRACT (Grand Summary) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) (Bidders must enter value zero "0" in Coloumn No. 13 for validation)
NUMBER #
Total Price CIP in EUR (Schedule 1)
Total Price CIP in USD (Schedule 1)
Total Price CIP in JPY (Schedule 1)
Total Price of Taxes & Duties in INR (Schedule 1)
Total Price EXW in INR (Schedule-2)
Total Price of Design Services in INR ( Schedule-3)
Total Price of Incidental Expenses in INR( Schedule-4)
SUBHEAD-EARTH WORKS(AS PER SOR,2023,PWD)
Construction of RCC Framed G+2 Building with Workshop Shed including MEP works, site works as per specifications, approved drawings and designs, complete. (Including supply of Civil and MEP materials). Refer to Sub-schedule A .
Sub-Schedule_B
Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply
All electrical works including supply of materials and installation as per approved designs and drawings including electrical wiring, switching and safety devices providing complete internal electrification complete with lighting, power outlets, fans, communication devices, electronic appliances, HVAC equipment and test equipment, all incoming and outgoing circuits as per applicable safety standards and best practices. (As Par 2023 CPWD)
Supply of other items for test lab
Earth work in excavation by mechanical means (Hydraulic excav
ator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. -All kinds of soil
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms liftupto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil
Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil
Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitablemethod complete.
Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling:
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
SUBHEAD-PILE WORKS(AS PER SOR,2023,PWD)
Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete piles of grade M25 of specified diameter and length below the pile cap, to carry safe working load not less than specified,excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap):
450 mm dia piles.
Providing and laying in position
SUBHEAD-CEMENT CONCRETE WORKS( AS PER SOR,2023,PWD)
-All work upto plinth level:
Providing and laying damp-proof course with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm/20mm nominal size).
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level:
1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)
1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size)
Per 50 kg of cement
attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering,
Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50 kg of cement.
attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering,
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)
Centering shuttering including struttings, propping etc. and removal of form work for:
Foundations, footings, bases for columns etc. for mass concrete with timber plank
Note: Bidder to provide rates for individual items in Row no 5. for record and use in case of variation purpose later. The Grand Total shall be carried forward to BoQ_4 Sl.2.01 of the Price bid.
Centering shuttering including
SUBHEAD-R.C.C WORK(AS PER SOR,2023,PWD)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and rinforcement
Weather shade, Chajjas, corbels etc., including edges.
Sub-Schedule_A
Stairs (excluding landings) except spiral-staircases with wooden plank
Supply & Construction Of RCC Framed G+2 Building With Workshop Shed For Equipment Testing Laboratory & Training Centre
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
Extra for additional height in centring, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof: Suspended floors, roofs, landing, beams and balconies (Plan area to be measured).
i)50 mm thick
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
SUBHEAD-BRICK WORK(AS PER SOR,2023,PWD)
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
First class brick work in foundation and plinth including cost of all materials as required complete:-
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:-
Extra for providing & placing in position 2 nos 6mm dia MS bars at every 6th course of full brick masonry work including anchorage in joints of 75mm in each side in superstructure for all level including cost of all materials as required complete:-
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
SUBHEAD-WOOD & PVC WORK ( AS PER SOR 2023,PWD)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
Karai wood
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured)
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete :
20 mm dia
Fixed to openings /wooden frames with rawl plugs screws etc.
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size)
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
ii)250 x 16 mm
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
ii)250 x 10 mm
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ role form G.I. sheet with zinc coating of grade 175 consisting of floor and ceilling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick fixed to the floor and ceilling at the spacing of 610 mm centre to centre with dash fastener of 12.50 mm dia- mater, 40 mm length and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceilling channel and placed at a spacing of 610 mm ce
ntre to centreb by 6 mm dia bolts and nuts at both ends of partition fixed flush to wall with rawl plugs at spacing 450 mm centre to centre and fixing of boards to either side of frame work by 25 mm drive all screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre, including jointing and finishing to a flush finish with recommended joiunting compound , jointing tape, joint finisher and two coats of primer siutable for boards as per manufacture's specification and direction of the Engineer-In-
75mm overall thickness partition with 12.5mm thick double skin plain Gypsum board conforming to IS: 2095: part I
Providing and fixing Concealed Door Closer With Track Arm (SS Finish), Slide in SS Cover Stainless Steel door closer, door weight upto 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
SUBHEAD-STEEL WORKS( AS PER SOR,2023,PWD)
Providing and fixing of Mortise Lock with Handles Stainless Steel Finish (Solid Casted) with necessary screws etc. complete as per design & approved by Engineer in Charge.
WOODS & PVC WORKS AS PER SOR, 2023 , PWD
80xl.25mm M.S. laths with 1.25 mm thick top cover
Extra for providing & fixing mechanical device chain and crank operation for operating rolling shutters of approved make complete as required:-
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter).
Providing structural steel work in single section fixed with or without connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required.
Exceeding 16.80 sqm in area
Hot finished seamless type tubes
Supplying and fixing rolling shutters of approved make,made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 275mm long wire springs grade No.2 and M.S. top cover of required thickness for rolling shutters & with handles, hold fast including embedding in cement concrete of required grade required for fixing in position, all necessary fittings, including applying of approved steel primer etc. complete as required:-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., includingwelding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing and fixing ball bearing for rolling shutters (exceeding 10 sqm area) of approved make complete as required
Extra for providing & fixing grilled rolling shutters manufactured out of 8 mm dia. M.S. plain bar instead of laths as per design approved by Engineer-in-charge (area of grill to be measured) complete as required.
Using M.S. angels 40x40x6 mm for diagonal braces
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
SUBHEAD:-ALUMINIUM WORKS( AS PER SOR,2023,PWD)
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required.
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-
Providing and fixing circular/ Hexagonal cast iron or M.S.sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape, including painting the exposed portion as per standard drawing complete as required (provided incase of low ceiling height).
Providing and fixing aluminium work for doors, windows, ventilators, stair railing including hand rail and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling to be paid for separately) :-
Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
For shutters/ sliding shutters of doors, windows & ventilators including providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately ):-
For fixed portion of approved quality:-
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge :-
With glass/ float glass panes of 5.5 m thickness ( weight not less than 13.50 kg / sqm )
Filling the gap in between aluminium frame and adjacent RCC/brick work by providing weather silicon sealant over backer rod of approved quality etc. complete as per architectural drawing and direction of the Engineer-in charge:- (i) Upto 5 mm depth and 5 mm width.
Providing and fixing aluminium tubular handle bar of 32 mm outer dia, 3.0 mm thick and 2100 mm long with Stainless Steel screws etc. of approved quality complete as per direction of Engineer-in-charge
Aluminium Composite Panels of 4mm total thickness with Top coil – 0.50mm AA3003 / AA3105 / AA5005Grade , manufactured as per IS-737 1986, FR Grade Class A2+
with 3mm Alumini um Corrugated Core as per standard EN 13501-1, class A2, and Bottom coil –0.50mm AA3003 / AA3105 / AA5005 Grade manufactured as per IS-737 1986 with minimum 25 microns lead free PVDF Coating conforming to AAMA2605 on top coil and Service coating on Back Coil (4 - 6 microns) having minimum panel weight of 4 Kg/m2
SUBHEAD-FLOORING & SKIRTING( AS PER SOR,PWD)
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. all complete as per direction of Engineer-in-charge.
Anodised aluminium of grade AC 15 ).
In dark shade using ordinary cement
Soluble Salt Stainfree vitrified tiles
Providing and fixing Kota stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with ordinary cement mixed with pigment of matching shade, including rubbing and polishing etc. all complete as per direction of Engineer-in-charge.
Kota stone slab 25mm thick
Size of tile 60x60 cm
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
450 mm X 300 mm in all shades and design
Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.complete.
Mat Finish Tiles
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1 : 3 ( 1 cement : 3 fine sand ) and joined with ordinary cement slurry mixed with pigment to match theshade of slabs, including rubbing and polishing etc. all complete as per direction of Engineer-in-charge.
Ceramic Tiles 1st quality 300 x 300mm in all shades and designs
18 mm thick Marble stone
Providing and fixing precast chequered cement concrete tiles 22 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete.
Providing and laying polished vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % and conforming to IS : 15622 of approved make in all colours, shades over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete.
Extra for providing and laying Vitrified tiles (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622 - 2017, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. all complete as per direction of the Engineer-in-charge
Soluble Salt Stainfree vitrified tiles (Glossy) / Double charged Stainfree vitrified tiles (Glossy) / Glazed Vitrified Tiles (Glossy / Mat Finish/ Anti-Skid) / Glazed Vitrified Tiles - Full Body (Glossy / Mat Finish/ Anti-Skid)
Providing and fixing Marble stone in floors over 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishing etc. all complete as per direction of Engineer-in-charge
Providing and fixing gang saw cut of approved thickness mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 ( 1 cement : 4 fine sand ) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing , curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels:-
18 mm thick Granite of any colour and shade duly approved:-
Agaria White marble
Area of slab over 0.50 sqm.
0.80mm thickness
Providing edge moulding to approved thickness marble stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete at all levels as required as per design approved by the Engineer-in-charge:- 18 mm thick Granite work.
Flat surfaces
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/Stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edge etc. complete.
SUBHEAD-ROOFING & CEILING( AS PER SOR,2023,PWD)
Supply & installation of pre-painted Galvalume sheets for oofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70,colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge.
Single socketed pipe - 110 mm OD
Providing 10mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame etc. complete as perdirection of Engineer-in-charge. (frame work to be paid separately) :
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion
Providing 10mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame etc. complete as perdirection of Engineer-in-charge. (frame work to be paid separately) :
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
A)Coupler
B)Single equal tee with door
i)110 x 110 x 110 mm
A)Coupler
C)Single equal tee without door
D)Bend 87.5 degree
E)shoe plain
12 mm cement plaster of mix
i)110 mm OD
i)Cement mortar 1:4 ( 1 cement : 4 fine sand )
In cement mortar 1 : 4 ( 1 cement : 4 fine sand )
12 mm cement plaster of mix
6 mm cement plaster of mix :
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
Neat cement punning.
Providing and fixing to the inlet mouth of rain water pipe PTMT grating with thickness of 8mm and weighing not less than 100gm. complete.
SUBHEAD-FI
Water thinnable cement primer
NISHING WORK( AS PER SOR ,2023,PWD)
15 mm cement plaster on the rough side of single or half brick wall of mix:
Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete
Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer]
New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Two or more coats on new work
100 mm diameter pipes
75 mm diameter pipes
Wall painting with acrylic plastic emulsion paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
Applying priming coat [Payment shall be made aftersubmission of Test Certificate issued by theManufacturer
SUBHEAD-PLUMBING WORKS( AS PER SOR,2023,PWD)
W.C. pan with ISI marked white solid plastic seat and lid
Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes espectively with automatic flushing cistern withstandard flush pipe and C.P. brass preaders with brass unions and G.I clamps complete, includingpainting of fittings and brackets, cutting and makinggood the walls and floors wherever required :
One urinal basin with 5 litre white P.V.C. automatic flushing cistern
With ready mixed Pink or Grey primer of approved brand and manufacture on wood work ( hard & soft wood ).
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever require:
Semi rigid pipe
32 mm dia
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm
long screws, rawl plugs etc., complete.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved 450mm long towel rail with total length of 495mm, 78mm wide and effective height quality and colour.
600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.
Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade.
Flat surfaces
Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighingnot less than 80 gms.
Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with aluminium paint of approved brand and manufacture over a priming coat of ready mixed zinc chromate yellow primer on new work [Payment shall be madeftersubmission of Test Certificate issued by the Manufacturer]:
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms
Single socketed pipe - 75 mm OD
Coupler
Single equal tee without door
Single equal tee without door
SANITARY WORKS
Single equal tee with door
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
Providing and fixing to the inlet mouth of rain water,soil, waste & vent pipes pipe PTMT grating withthickness of 8mm and weighing not less than 100gm
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction ofEngineer in Charge
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (workingpressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion
Internal work - Exposed on wall.
15 mm nominal outer dia .Pipes.
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water, soil, waste & vent pipes pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion
15 mm nominal outer dia .Pipes
15 mm nominal outer dia .Pipes.
20 mm nominal outer dia .Pipes.
External work
40 mm nominal outer dia .Pipes.
i) 110 mm dia
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water,soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 1cement : 4 fine sand) making good the wall etc. complete
SUBHEAD- WATER SUPPLY(AS PER SOR,2023,PWD)
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water,soil, waste & vent pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 1cement : 4 fine sand) making good the wall etc. complete
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work including cutting chases and making good the walls etc.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supplyncluding all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore
Providing and fixing brass bib cock of approved quality :
Providing and fixing gun metal non-return valve of approved quality (screwed end):
i)15 mm dia nominal bore
Providing and fixing brass stop cock of approved quality :
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
i)25 mm dia nominal bore
ii)40 mm dia nominal bore
i)40 mm dia nominal bore
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
i)100 mm dia
Providing and fixing unplastisised P.V.C. connection pipe with PTMT Nuts of approved quality and colour
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
15 mm nominal bore with 30cm length.
20 mm nominal bore. Weighing not less than 40 gms
With 1st class bricks
SUBMERSIBLE PUMP( AS PER SOR,DWS,2023)
Cutting holes upto 30x30 cm in walls including making good the same
A. with contractor's mini rig
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with well burnt 2nd class bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 1st class bricks in cement mortar 1:4 (1 cement : 4 fine sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 fine sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement:3 fine sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc.complete as per standard design :
With 1st class bricks
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
With 1st class bricks
i. 150 mm dia
SUBMERSIBLE PUMP( AS PER SOR,DWS,2023)
with contractor's mini rig
A. 'CM' Casing pipe
II. UPVC 'CS' casing pipes
SUBMERSIBLE PUMP( AS PER SOR,DWS,2023)
Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets
Drilling and boring pilot hole in any soil strata by mini drilling rig, collection of soil samples of different strata met with during drilling at various suitable levels, preservation of samples in polythene bags / sample boxes and disposal of excess soil or mud, including the cost for bentonite, water etc. as required to maintain the pilot hole properly as perspecification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge
150 mm dia
Reaming of pilot hole to an enlarged bore hole in any soil strata by mini drilling rig, disposal of excess soil or mud,including the cost for bentonite, water etc. as required tomaintain the bore hole properly as per specification ( IS :2800 (part-I)) and direction of the Engineer - in - charge
A. 'CM' Casing pipe
i. from 150 mm dia pilot hole to 350 mm bore hole
B. 'RS' pipe
Washing of enlarged bore hole of 350 - 550 mm dia in any soil strata by mini drilling rig, disposal of excess soil or mud,including the cost for bentonite, water etc. as required to maintain the bore hole properly, including lifting of drill pipes as per specification ( IS : 2800 (part-I)) and direction of the Engineer - in - charge.
A. 'CM' Casing pipe
Providing & lowering of UPVC pipe as per IS:12818 after washing of the bore hole by mini drilling rig as per specification and direction of the Engineer - in - charge.
Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer - in - charge
A. with contractor's rig
Shrouding of the deep tube well assembly with washed peagravels ( 2.0 - 4.75 mm effective size ) as per specification (IS:4097) and direction of the Engineer - in - charge. ( pea gravels will be supplied from the deptt. free of cost from the stackyards in which the pea gravels are available.)
150 x 100 mm dia
Providing and fixing of UPVC end cap / well cap suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge.
i. 40 mm OD
Providing and fixing of UPVC reducer suitable for UPVC 'CM' casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer - in - charge.
i. 40 mm dia
Providing and fixing of housing clamp ( made with 12 mm thick MS sheet ) along with well cap (made with 10 mm thick MS sheet ) with necessary arrangements for SBDTW as per specification and direction of the Engineer - in - charge
Providing, fixing and laying rigid UPVC pipes conforming to IS : 4985 jointing with couplers, of same class conform
ing to IS : 10124 ( Pt-II ) with solvent cement conforming to IS :14182 including testing of joints complete ( but excluding the cost of specials like bend, tees etc. which will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.
A. Class - 3 ( working pressure 6.0 kg / cm2)
Providing, fixing and laying fabricated UPVC bend of required degree conforming to IS : 10124 ( part 8 / 9 / 10 / 11 / 12 / 13 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.
Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge
Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge
Installation of submerssible pump with motor upto the depth of 100 ft by GI pipe ( conforming to IS : 1239 medium class ) with tailpiece as required welded with GI flange in/c providing fitting fixing by necessary rubber washer, nuts & bolts, MS safety clamp etc. as per required size and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run as per direction of the Engineer-incharge (pump, motor with cable will be issued by the Department at free of cost but G.I. pipe of medium class for column assembly will be supplied by the agency at his cost).
2500 GPH capacity with 50 / 65 mm dia G.I. pipe and 10 mm thick GI flange
AS PER PREVAILING MARKET RATE( NON-SCHEDULE ITEM
Providing & supply of 3HP Submersible pump motor of KIRLOSKAR/CROMPTON GREAVES make
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
Providing, fixing and laying fabricated UPVC equal tee conforming to IS : 10124 ( Part 5 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge
Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
2500 GPH capacity with 50 / 65 mm dia G.I. pipe and 10 mm thick GI flange
AS PER PREVAILING MARKET RATE( NON-SCHEDULE ITEM
Providing & supply of 3HP Submersible pump motor of KIRLOSKAR/CROMPTON GREAVES make
Suitable HP Squirrel cage induction motor, TEFC,Synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
Suitable cement concrete foundation duly plastered with anti vibration pads.
2500 GPH capacity with 50 / 65 mm dia G.I. pipe and 10 mm thick GI flange
AS PER PREVAILING MARKET RATE( NON-SCHEDULE ITEM
1620 LPM at 70 m Head
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
180 LPM at 70 m Head
Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
Incomings
Outgoings
Main Fire Pumps
Jockey Pump
All standard relays and accessories for automatic operation of diesel engine System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
All kinds of soil
All standard relays and accessories for automatic operation of diesel engine System Controller
Pipes, cables etc. exceeding 80 mm
dia. but not exceeding 300 mm dia
Metre
Providing, laying, testing & commissioning of 'c' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:
All hangers, clamps, brackets etc. shall be of galvanized iron unless specified other wire and then supply of the same shall also be included for rates under this head. Including two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the Engineer in charge.
80 mm dia
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
200 mm dia (wall thickness 6.3 mm)
250 mm dia (wall thickness 6.3 mm)
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
80 mm dia.
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
200 mm dia (wall thickness 6.3 mm)
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
200 mm dia (wall thickness 6.3 mm)
Single headed Stainless steel
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
150 mm dia
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
Providing, installation, testing and commissioning of non return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
50 mm dia
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type A) as required
Stainless Steel (Grade 304)
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
20 mm nominal internal dia gun metal globe valve & nozzle.
Drum and brackets for fixing the equipments on wall.
Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
4 way - 150 mm dia M.S. Pipe
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m
200 mm dia (wall thickness 6.3 mm)
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
Providing & fixing GM fire brigade suction hose coupling (draw-out connection) with nut for female coupling as per IS standards complete with 100 mm dia GI suction pipe and 100 mm dia foot valve (to be connected to static tank). Provision of GI drop pipe and foot valve shall be made in all the fire water static storage tanks (2 No) (GI pipe to be paid separately through appropriate item while cost of foot valve to be included).
Providing and fixing forged brass ball valve suitable for test pressure of not less than 15 kg / sq.cm of the following size : Cost shall be inclusive of providing necessary union / flange connection).
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
Providing and fixing of Weather proof hose cabinets fabricated from 16 g G.I. Sheet with full glass door and mortise locking arrangement , suitable to accommodate one Hydrant landing valve, 2 nos. 15 M long hose and 1 No branch pipe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx. 0.75mx0.6 m x 0.25 m).
Metre
Providing and fixing MS partly glazed single/double hung lockable shutter fabricated from MS section as required with 5 mm thick glass for fire station complete including stove enamelled painting of door and frame and words "Fire Hydrant" written on glass, suitable to accommodate 2 Hydrant landing valves, 1 fire hose reel, 2 nos.15m long 63 mm dia hose,1-branch pipe, 1no. fire man's axe, fire extinguishers 2 nos, including suitably mounted on a raised masonry platform as required. (Approx. Size 0.90 m x 2.1m)
Providing and fixing resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 450C temperature working pressure 12 kg and test pressure 20 kg/cm2.
Supplying & laying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cables as per specification in existing trenches, cable trays, ducts, clamped to wall with suitable clamps including providing and fixing of all fixing accessories, connecting, testing and commissioning.
NON-SCHEDULED ITEM(FIRE FIGHTING SYSTEM)
Power cable 3.5 core 150 sq mm aluminium conductor armoured cable
section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-
In grating, frames, guard bar, railing, brackets, gates and similar works, all complete
Supply & Construction of RCC Boundary Wall For Equipment Testing Laboratory & Training Centre
Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars
Demolishing brick work including
stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:-
In cement mortar.
Earth work in excavation by
mechanical means (Hydraulic
excavator) / manual means in
Amount
foundation trenches or drains (not
Filling available excavated earth
(excluding rock) intrenches, plinth,
Amount
sides of foundations etc. in layers not exceeding 20cm in depth,
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and
compacting each layer by using plate compactor or by any suitable method complete.
SUBHEAD-CEMENT CONCRETE
Providing and laying in position
cement concrete of specified grade excluding the cost of centring and shuttering -
1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size)
SUBHEAD-R.C.C WORK
specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
All work upto plinth level:
Reinforced cement concrete work in walls (any thickness), including
attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering,
finishing and reinforcement
Reinforced cement concrete work in
beams, suspended floors, roofs having
slope upto 15° landings,
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-
balconies, shelves, chajjas, lintels,
Centering shuttering including struttings, propping etc. and removal of form work for:
Note: Bidder to provide rates for individual items in Row no 5. for record and use in case of variation purpose later. The Grand Total shall be carried forward to BoQ_4 Sl.2.01 of the Price bid.
Centering shuttering including
struttings, propping etc. and removal of form work for:
Reinforcement for R.C.C. work
including straightening, cutting,
Supply & Construction Of RCC Framed G+2 Building With Workshop Shed For Equipment Testing Laboratory & Training Centre
bending, placing in position and
binding all complete upto floor five level.
First class brick work in foundation and plinth including cost of all materials as required complete: -
In cement mortar 1:4 ( 1 cement : 4 fine sand ).
i)In Cement mortar 1:4 ( 1 cement : 4 fine sand )
SUBHEAD-STEEL WORKS
Steel work welded in built up
FIRE ALARM ( AS PER P.A.R 2023,CPWD
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.13 MB
BOQ_67819.xls
BOQ • 0.56 MB
Vol1SBD.pdf
Tender Documents • 1.74 MB
VolIITS.pdf
Tender Documents • 4.65 MB
AppendixAA.pdf
Tender Documents • 0.29 MB
Download all tender documents and submit your bid