Repairs to Circuit House at Valsad Dist.Valsad (Repairs to Annexx Building Bath and Toilets and Damp Proofing of wall Door-Window etc.)

Name of work :-

Repairs to Circuit House at Valsad, Dist.Valsad (Repairs to Annexx Building, Bath and Toilets and Damp

Proofing of wall, Door-Window, etc.)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling tiled of stone floors laid in mortar including stacking of 263.0 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 12.00 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

3 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 551.40 Rmt. 75.08

and clamps including stacking the materials with all lead and lift ( for any

4 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 59.00 Nos. 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

5 Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x 24'' in flooring 52.00 Sqmt 1073.13

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3- coarse sand ) finishing with flush pointing in white

6 Providing and laying Vitrified tiles 8 to 10 mm thick , 24''x 24'' in skrting 211.00 Sqmt 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry

7 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 71.40 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

8 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 180.00 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

9 Providing, laying and jointing in true line and level 75 mm dia. UPVC 120.00 Rmt. 698.92

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp at every 2000 mm c/c or shall be conceled in walss as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

10 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 180.00 Rmt. 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

11 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 12.00 Nos

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

12 Providing and fixing screw down bib taps of following size.(B) Brass 30.00 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

13 Providing and fixing brass screw down stop tap.(A) 15mm dia. 15.00 Nos 205.83

14 Providing and fixing pillar tap, capstan head, screw down high pressure 15.00 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

15 Providing and fixing wsh down water closet (European type, W.C. Pan) 15.00 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in white

16 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 15.00 Nos 2344.42

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled flush bend including

cutting holes in walls and making good the same connecting the flush

bend with cistern and closet (overflow pipe to be measured and paid for

separately)(A) Vitreous China (I) In white colour

17 Providing and fixing plastic seat and cover for wash down water closer 15.00 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

18 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 15.00 Nos 355.52

long with wall hook and other accessories etc. completed

19 Providing and fixing wash basin with single hole for pillar tap with C.I. Or 15.00 Nos 1961.83

M.S. brackers painted white including cutting holes and making good the

same including pillar tap, Brass waste, stop cack , bottle trap and M I

fisher union fittings :(ii) Flat back wash basin 500mm x 400mm size

including all necessary fittings etc complete shade and pattern as

approved by Engineer in charge.

20 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 15.00 Nos 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

21 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 23.00 Sqmt 2547.22

depress panel Single shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also taking hinges &

fintures.The whole FRP frame & shutter is to be waterproof,

weatherproof ,termite proof & resistance to mild acid/alkali.Rates are to

be inclusive of S.S hinges with necessary screws & alluminum fixtures &

fastenings & fartener sleeve.Colour and Shade approved by Engineer-In-

22 Removing, Repairing and Refixing Old existing wooden door shutter 10.00 Nos 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

23 Providing average 20 mm thick single coat polymer plaster by removing 92.00 Sqmt 455.51

detoriated plaster over RCC member, like column, beam, slab etc.

exposing existing reinforcement including scraping by wire brush,

applying rust removing chemical, rust convertor and zinc rich primer on

existing reinforcement, applying polymer bonding agent on existing

concrete surface including plastering in CM 1: 3 in single coat including

standard quality (Dr, fixit or any equivalent brand) curing compound

agent and finishing with floating coat of neat cement slurry adding

Polyalk Fix Prime polymer chemical as per directed by Engineer - in -

charge for all floors.

24 Providing 10mm thick cement plaster in single coat on brick/concrete 223.00 Sqmt 116.13

walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

25 Providing & laying Synroof Hi Build 1mm thick ecetrometric, premium 918.00 Sqmt 608.02

quality acrylic coating as a water proofing membrane finished which

consists a coat of bitumat primer & 80 CSM membrane on terrace with

ultra violet resistance working upto any height with 5 years guarantee

against any leakage etc. complete per detail specification & as directed by

Engineer-in-charge.

26 Providing and fixing 35 mm thick flush door Single shutter, solid core 32.00 Sqmt 3157.26

with Shutter of Factory made & Stamped I.S 12823 Grade one ,Type one

,melamine faced three layred resin Flushed Door Having Decorative

Lamination on both sides & 12 mm T.W.Beading Around the Door,FROM

HOLDING LICENCE FOR MINIMUM 5 YEARS .and stainless steel handle

and necessary Locking system of Godrej, zinc coated hinges ,fixtures &

fastenings etc directed by engineer in charge.D2

27 Providing & Fixing in position standard extruded approved colour 5.00 Sqmt 2049.29

anodised Aluminum Ventilator with outer frame 65 x 25 mm Stander Box

Frame with 5mm thick Ground Glass Louvers and Fixed Mosquito Net For

ventilation including all required materials, fixtures, fastenning, labours

and equipments as per detailed drawing as directed. For Ventilators V,V1

28 Providing and fixing window having extruded aluminum Colour anodized 54.00 Sqmt 2140.33

section frame main outer size 127mm x 38.10mm x 1.35mm @wt.

1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x

1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x 31.75mm

x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x

18mm x1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details

etc complete for window.

Rupees Sexteen Lakh Seventeen Eight Thousand Nine Hundred Ten Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1678910.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division