Loading…
Loading…
Tender Value
₹28.3 L
EMD Value
₹28,300
Closing Date
22 Jun 2026, 6:00 pm5d left
Executive Engineer, Electrical (R&B) Division, surat
Providing Street lights ROB on Kosamba -Tarsadi Road KM 0/0 to 2/8 at Kosamba- Tarsadi Railway Over Bridge & Service Road at ROB of Kosamba village & Tarsadi Nagar Palika Ta Magrol Dist Surat.
314059
TENDER NOTICE NO. 05 OF 2026-27
Open
Electrical - All
Surat
7 documents required · 7 mandatory
₹1,500
Executive Engineer, Electrical (Rand B) Division, Surat.
₹28,300
12 Jun 2026
12 Jun 2026
12 Jun 2026
22 Jun 2026
12 Jun 2026
Providing Street lights ROB on Kosamba-Tarsadi Road Km 0/0 To 2/8 At Kosamba-
Name of work : Tarsadi Railway over bridge & Service road At. ROB of Kosamba village & Tarsadi
Nagaralika Ta.Mangrol Dist.Surat.
DESCRIPTION TENDER RATE
Qty Unit Rate in Rate in Per Amount
1 643.00 Mtr. Supplying and erecting Flexible PVC insulated multi strand multi 46.46 Rupees Forty Mtr.
core 1.1 kv grade ISI marked copper wires of following size to be Six And Paise
erected as directed. (e) 1.50 Sq.mm 3 core round PVC sheathed Forty Six Only
2 2405.00 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 140.39 Rupees One Mtr.
multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on Hundred Forty
wall with necessary clamps or in existing trench / pipe of following And Paise
size of cables (C) 4 core 10 Sq. mm Thirty Nine
3 270.00 Mtr. Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 220.18 Rupees Two Mtr.
multistrand Aluminium conductor for 1.1 KV. to be laid on wall Hundred
with necessary clamps or in existing trench / pipe of following size Twenty And
of cables (B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) Paise Eighteen
4 32.00 Nos. Providing and, fixing heavy duty flange type brass cable gland with 38.38 Rupees Thirty Ea.
rubber ring for PVC insulated armoured cable complete with out Eight And Paise
going tails, insulating tape etc for following size of cables. (C) 2 to 4 Thirty Eight
core 10 Sq. mm Only
5 4.00 Nos. Providing and, fixing heavy duty flange type brass double 75.75 Rupees Seventy Ea.
compression type cable gland with rubber ring for PVC insulated Five And Paise
armoured cable complete with out going tails, insulating tape etc for Seventy Five
following size of cables. (B) 3 & 1/2 core 35/50 Sq. mm Only
6a 456.00 Nos. Solder less crimping type Aluminium lugs conforming to IS suitable 13.13 Rupees Ea.
for cable of following size evenly crimped with high pressure tool & Thirteen And
connected to switchgear terminals with brass/cadmium plated nut Paise Thirteen
bolts in an approved manner. (B) 10 Sq.mm Only
6b 16.00 Nos. (D) 35/50 Sq.mm. 20.20 Rupees Twenty Ea.
7a 82.00 Ea Supplying and erecting LED street light / Flood light fittings with 6566.01 Rupees Six Ea
High power White LEDs wattage of 3 Watt and above assembled on Thousand Five
single MCPCB, efficiency more than 130 lm/w and corrosion free Hundred Sixty
High pressure die cast aluminum housing with smooth finish powder Six And Paise
coated and heat sink extruded aluminium with diffuser and One Only
Polycarbonate optics/ lenses, with toughened glass with company
mark/name engraved or embossed 160 to 270 V,Power Factor more
than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio
>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency
> 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:
Below description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity
between the ranges shown.) (A) Street Light (IP-65), Surge
protection -4KV integral and ,Light must have 440VAC line supply
with over-voltage protection. (iv) above 90 to 120 watts Cat-lll
7b 14.00 Ea (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light 7266.95 Rupees Seven Ea
must have 440VAC line supply with over-voltage protection. (iv) Thousand Two
above 90 to 120 watts Cat-lll Hundred Sixty
8 2.00 Nos. Supplying & erecting IP 55 grade following size section pillar 16691.26 Rupees Sixteen Ea.
fabricated from joint less M.S. Sheet with angle iron legs made from Thousand Six
jointless M.S. Angle with cable clamps to be buried in ground to Hundred Ninety
have appropriate erection to work uniform until erected with cement One And Paise
concrete foundation and 45 cm high bricks work finishing with Twenty Six
plaster etc. hinged double door internally supported on both side, Only
with internal and outside looking arrangement with look and keys in
duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and
other with nut and bolt for erecting Bakelite sheet. Painting the
Section Pillar inside and out side with three tank powder coated
paint. section pillar roof should be without joint with water leakage
proof & tested as per IP 55 test & followed by IS 2147 of 1962 (A)
150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet
with angle iron legs 95 cm long made from 40 X 40 X 6 mm thick
9 1.20 Sq.Mtr Providing & erecting weather proof, dust & vermin proof, floor 11466.53 Rupees Eleven Sq.
mounted front operated outdoor type double door cubical panel Thousand Four Mtr
board necessary IP-54 and above protection as per approval from Hundred Sixty
engineer incharge made from 14 SWG thick CRC M.S. sheet for Six And Paise
outer body & doors, 16 SWG thick CRC M.S.sheet for internal Fifty Three
partitions with necessary accesories , supporting angles/ flats channel Only
including cutting, bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements & instruction of
engineer-in-charge with erection of supplied switch gears,
BUSBARS, suitable size of inter connecting PVC copper wire /
copper-aluminium strips, rubber grommets, rib, bakelite control
fuses/MCB for measuring instruments, earth bus & earth bolts,
foundation flange - bolts-base Plates, sufficient nos. of hinged doors,
handles with locking arrangement and rubber gasket,heavy duty end
terminal connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel shall be painted with
epoxy powder coating. (The rates excludes the cost of switchgears,
bus bars, inter connecting mains & Copper Aluminium strips,
meters, Fuses etc. The dimension shall be measured excluding base
beams) The panel shall be supplied with following approved
manufacturers with following size. (A) locally fabricated panel
board (i) with 350mm depth
10 2.00 Nos. Supplying and erecting HYLAM sheet on existing angle iron 1156.45 Rupees One Sq.
frame.for following thickness (C) 6mm Thousand One Mtr
Forty Five Only
11 1750.00 Kg. Providing , erecting , fabricating the M.S. structure as per 77.77 Rupees Seventy Kg.
requirement on site incorporating proper size of M.S. Seven And
angles,square,round, flats, bars, channels, sections complete with Paise Seventy
cutting, welding, grinding & finishing duly painted with one coat of Seven Only
red oxide with erection on site as per direction of engineer in charge
with necessary grouting, cementing, plastering & finishing complete.
12 4.00 Nos. Providing & erecting 415V MCB Four Pole Switch for Lighting Load 638.32 Rupees Six Ea.
(B curve) having 10KA breaking capacity & confirms to IS :8828 in Hundred Thirty
existing box having following capacity (b)40 Amp. Cat.III Eight And Paise
13 4.00 Nos. Providing and erecting Approved make Four pole moulded case 8055.76 Rupees Eight Ea.
circuit breaker having breaking capacity ICU of 35 KA. at 415 V. Thousand Fifty
having normal current rating 125A. with Fixed thermal & magnetic Five And Paise
release suitable to work on A.C.supply 50 c/s. with all internal Seventy Six
connections, spreader tinned copper & complete erected in existing Only
16 G.M.S. housing. ICS=100% of ICU only Cat III
14 96.00 Nos. Providing and erecting Miniature circuit breaker single pole 0.5A to 270.68 Rupees Two Ea.
2A system and having breaking capacity 10 KA to be erected in Hundred
existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Seventy And
15 4.00 Nos. Supplying & erecting earth pit of minimum bore dia.150mm size 4591.46 Rupees Four Ea.
approved make Earthing Electrode consisting Pipe-in-Pipe Thousand Five
Technology as per IS 3043-1987 made of corrosion free hot dipped Hundred Ninety
G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron One And Paise
galvanising, Inner pipe dia of 25 mm having 200-250 Micron Forty Six Only
galvanising, connection terminal dia of 12mm with constant ohmic
value surrounded by highly conductive compound with high charge
dissipation suitable for following type of applications with chamber
and heavy duty cover. (A)(approved make OEM has to submit test
certificate including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to ensure the
value of earthing resistane mentioned in test Certificate) & having
back filling compound of (B) Inner chemical (CCM Compound)-
Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)
Back fill Compound :- Earthing compound should be capable to
retain moisture for long time Necessary test report must be
submitted by Agency. (a) For Electrical Installation up to 440V in
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
16 6.00 Kg. Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Rupees Seven Kg.
17 120.00 Kg. Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 77.77 Rupees Seventy Kg.
18 216.00 Mtr. Making trench in Hard Murrum / Tar Road of suitable width of 90 74.74 Rupees Seventy Mtr.
cm or required depth for laying any size of cable or locating the Four And Paise
fault all over the run and back filling the same and making the Seventy Four
surface as normal ground. Only
19a 2405.00 Mtr. Providing & laying approved make ISI marked HDPE 6Kg / cm2 108.07 Rupees One Mtr.
(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing Hundred Eight
on or floor as directed for laying of cable. The pipes as following And Paise
size of dia & weight per 6 mtr. (A) 40 mm inner Dia. Seven Only
19b 243.00 Mtr. (E) 90 mm inner Dia 491.87 Rupees Four Mtr.
20 41.00 Nos. Supplying and erecting approved make Octagonal pole made from 14010.72 Rupees Ea.
HR sheet steel. The pole should be made as per IS. and shall be Fourteen
coated with hot dip galvanizing as per IS 2629/2633/4759, suitable Thousand Ten
suspend local wind speed with integral Junction box consist of And Paise
terminal plate of min 6mm Hylam sheet, standard profile Seventy Two
35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and Only
arrangement for cable termination to be erected With Suitable
foundation (Included) as per details given by manufacturer
considering site requirement. (G) 8 Mtr. Long 70 mm Top X
mm bottom dia, 3 mm thickness with 260mmX260mmX16mm base
plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts
Approx Pole weight 84 kg
21 82.00 Nos. Providing and erecting Street Light pole bracket comprising main B 683.77 Rupees Six Ea.
Class GI pipe of 4.2 cm/require outside dia. complete with suitable B Hundred Eighty
Class G.I. sleeve tubing of approx. 45cms.length and suitable for Three And
76.5 mm /80mm / required size of pole top having sufficient Paise Seventy
fasteners for fixing the brackets and having spread of 1.5.mtr. length Seven Only
with 110 deg.with vertical plane & suitable welded stays, reducer
and with check nuts complete painted with one coat of Red oxide /
PU base primer and two coats of Aluminium / PU paint. paint with
following nos of arms. [A] Single Arm Bracket 1.5 Mtr
22 164.00 Nos. carry out RCC Core cutting- up to 25 mm dia./300mm thick 387.34 Rupees Three Ea.
Wall/beam/slab with providing PVC pipe of 3 mm thick inside and Hundred Eighty
necessary finishing on both ends of wall . Seven And
23a 120.00 Nos. Supplying following size of Light duty “A” Class G.I . Pipe & 300.98 Rupees Three Ea.
erecting as directed by Engineer-in-charge. (B) 50 mm dia Hundred And
23b 90.00 Nos. (D) 100 mm dia. 696.90 Rupees Six Ea.
24 2.00 Nos. Smart 4G Timer, Supply of IoT based 4G Smart Streetlight Control 100427.33 Rupees One Ea
& Monitoring System having a Smart Panel comprising of 3 Phase Lakh(s) Four
IoT Streetlight Smart 4G Timer with 16x2 LCD to display RSSI, Hundred
relay status, RTC time & diagnostics., Controller works on 3-phase Twenty Seven
& also on any available 1-Phase., Controller with 8-hour battery And Paise
backup during external power failure. External power failure alert Thirty Three
immediately to cloud., 110-630 V AC @ 50-60 Hz – 3 phase Only
operating range., Standby power consumption <3W., Smart 4G
Timer with RS232 port for DLMS Energy meter., Smart 4G Timer
must be compatible with any make / brand of DLMS (RS232) Energy
Meter., DI: 4 Nos. (3 Contactor / Latch detection, 1 for Door
Sensor.)., DO: 3 Relays for Independent control each phase (R, Y, B)
with 1 extra spare relay., Smart 4G Timer with dual SIM
functionality for connectivity backup., 4G M2M SIM 3-Year
communication included., Local configuration via WiFi / BLE for
maintenance or during force majeure., GPS chip inbuilt of Smart 4G
Timer for auto location tracking & astronomic schedule location.,
50 programmable schedules., Astronomic scheduling with monthly
offsets., Smart 4G Timer has inbuilt timer stores schedules locally &
also stores schedule execution logs locally, syncs to cloud whenever
connected to cloud., Auto-scheduler overrides manual operations.,
Monitoring & alerts for MCB trips., Over/under voltage, current,
overload, power factor & short circuit protections with alerts via
Dashboard, App, SMS, WhatsApp & Email., Contactor / Latch
chattering protection & alerts., Smart 4G Timer with neutral failure
protection and alert., Bulit-in Watchdog for anti-jamming., Smart 4G
Timer must send Regular "heartbeat" on software for CCMS status.,
Accelerometer for tamper & panel movement detection & alerts.,
Smart 4G Timer must be tested from an NABL Lab for Surge Test @
6 KV (IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-4-2), EFT @
2 KV (IEC 61000-4-4), Conducted Emission @ 150 KHz-30 MHz
(CISPR11), Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of
12+12 hours (IS: 9000 (Part 5/Sec.2):1981 latest) with all test
passing criteria as “Temporary degradation or loss of function or
performance which is self-recoverable”., FOTA functionality
required for upgrades., Smart 4G Timer sends & stores online/offline
data of controller & load for lamp burn hours analysis.,
It stores & syncs connectivity logs for configuration of network
connections & analytics., PANEL & SWITCHGEAR, The panel
includes a Class 1 DLMS energy meter NABL approved with 1-2
months of stored data of daily, hourly, monthly, load survey,
instantaneous, events, tamper data & with power events stored in
meter memory for audit purpose., Must monitor V, I, KWH, KVA,
PF, KVAH, etc., Panel made with 2 mm CRCA sheet with ground
mountable stand complete with gland plate, waterproof glands,
earthing bolt., IP55, weatherproof panel with RAL7035 powder-
coated., Smart 4G Timer must be fitted on removable terminal
sockets for easy maintenance., Switchgear includes 3 Nos. 3 pole
Contactor / Latch having minimum 50 A Load carrying capacity per
phase, all other switchgear & wires: 40 A load carrying capacity.,
Nos. 4P MCB 10 kA for Incomer & 6 Nos. 1P MCBs 10 kA for
Outgoing., Phase-Wise Bypass MCBs required., 4P RCCB 100 mA.,
door sensor. Also, provide lock & key facility., Panel mount outdoor
antenna for GSM, GPS., Canopy design for draining down water.,
CCMS SMART SOFTWARE, OAuth 2.0 APIs for sending data to
Government clouds/software, etc., CCMS Web dashboard with
secure password & OTP login., Hosted on trusted cloud, data
security, antivirus & attack protection., HTTPS., AES256-bit
encryption., Vulnerability Assessment and Penetration Testing
(VAPT) certificate for CCMS Software., Streetlight management
software for load status, live analytics & reports., Energy meter data
tables (kW, kWh, PF, I, V, etc.) available., Utility monthly bill
reconciliation & Class 1 accuracy reports for billing, energy
monitoring & auditing for streetlight load., Fault detection., Light
fault 99% analysis on dashboard using energy monitoring.,
WhatsApp integration., Hierarchy-wise reporting & alerts., GIS
mapping of live connected streetlight control panels, poles &
25 14.00 Nos. Supplying & erecting approved make SMC press moulded 476.72 Rupees Four Ea.
composite FRP. loop-in, loop-out approx. 2mm thick box complete Hundred
with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting Seventy Six
mob & hinged doors as per requirement having locking And Paise
arrangements with mounting clamp with nuts, bolts & washers Seventy Two
suitable for erection on pole with cable clamps& earth bolt of Only
following size of box. (C)150mm x 125mm x 100mm [deep]
26 160.00 Mtr. Drilling the road without breaking the road surface (Asphalt) for 492.88 Rupees Four Mtr.
laying of cable for feeding power supply by making up to following Hundred Ninety
size of holes at both ends complete. (A) Up to 100 mm bore dia Two And Paise
Executive Engineer,
Electrical R & B Division,
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Schedule B.pdf
Special Condition.pdf
Online Tender Notice No 05 of 2026-27.pdf
NOMINETED ELECTRICAL SUB –CONTRACTORS.pdf
FINAL _ SBD (Electrical Work) _ 2024 _ 120 pg.pdf
Download all tender documents and submit your bid