Construction of Building for the office of Retail Sale Depot Bhuthnath Kullu

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lifts upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level: 1:3:6 (1 cement: 3 coarse sand): 6 graded stone aggregate 40 mm nominal size). 1:4:8 (1 cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) Details of cost for 1 cum.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12(1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortar 1:6(1 cement: 6 coarse sand)

Brick work with common burnt clay F.P.S. ( non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand)

Half brick masonry with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement: 3 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for all heights: Foundations, footings, bases of columns, etc. for mass concrete a) Details of cost for footing size 2.7mx2.7mx1.00m Contact area=10.8 sqm.

b) Centering and shuttering including strutting, propping etc. and removal of form work for: Columns, piers, abutments, pillars, posts and struts Size of column 450x450 mm and 2.5m high Area of contact= 4x0.45x2.5=4.5 sqm.

c) Centering and shuttering including strutting, propping etc. and removal of form for all heights: Lintels, beams, plinth beams, girders, bressumers and cantilevers

d) Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering and shuttering, finishing and reinforcement- All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand): 4 graded stone aggregate 20 mm nominal size). 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 4.0 mm thick glass panes 4.0 mm thick glass panes

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size). Details of cost for 1 hold fast

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 150x10mm

Providing and fixing bright brass handles with screws etc. complete 125 mm

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16mm

20 mm cement plaster of mix: Cement mortar 1:3 (1 cement: 3 coarse sand) cement plaster on rough side of single or half brick wall of mix: cement mortar 1:3 (1 cement : 3 coarse sand)

Providing and laying vitrifried floor titles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand), joining with grey cement slury @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc.l complete. Size of tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, average 6mm thickness, including grouting of joints (payment for grouting of joints to be made separately). Size of Tile 600x600 mm

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture Detail of cost for 10 sqm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture Detail of cost for 10 sqm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer New work (two or more coats) over and including water thinnable priming coat with cement primer Detail of cost for 10 sqm