REPAIR AND MAINTENANCE OF INTERNAL ELECTRIC SUPPLY, REPAIR / SERVICING OF CEILING FAN, EXHAUST FAN, GEYSER AND OTHER MISC E/M WK AT DIBER FIELD STATION PITHORAGARH

Amount

Disconnecting, dismantling and taking out the existing unsv items of any description, any make and in any position and refixing new items shall be measured & paid for separately as “Supply & fixing in repair” under appropriate item of Sch ‘A’, disconnecting, dismantling/testing charge is deemed to be included under the unit rate quoted by the contractor for this item complete all as specified and directed. NOTE :- Applicable for Sch ‘A’ Item No. 1.01 to 1.43) credit will given separelely for demolised items.

S&F in repair switch piano, flush type, single pole one way 5 amps complete all as specified and as directed

S&F in repair socket out let 2 in 1, 3 pin 5A, flush type complete all as specified

S&F in repair switch piano, flush type, single pole one way 15 amps complete all as specified and as directed

S&F in repair socket out let 2 in 1, 5 pin 5A and 15 Amp , flush type complete all as specified

S&F in repair switch socket combination 2 in 1, 5 pin 5A and 15 Amp , flush type incl gang box complete all as specified

S&F in repair ceiling rose 3 phase PVC/polycarbonate, isolated body complete all as specified

S&F in repair lamp holder PVC/polycarbonate type with back plate incl mounting box complete suitable for batten fitting isolated body complete all as specified

S&F in repair Ceiling Fan Regulator deluxe 240V 50 Hz step type.

S&F in repair switch piano, flush type, single pole two way 15 amps complete all as specified and as directed

S&F in repair Bell push AC, 50 Hz, 230 Volts, 5 amps.

S&F in repair Bell ding dong

S&F in repair Capacitor for ceiling fan 2.5 MFD copper wired

S&F in repair Capacitor for ceiling fan 4 MFD copper wired

S&F in repair Top plug 3 pinl 6 Amp

S&F in repair Top plug 3 pinl 16 Amp

S&F in repair PVC Cashing capping 1 inch incl batten gitti as required

S&F in repair PVC Cashing capping 1/2 inch incl batten gitti as required

S&F in repair PVC Gang box incl screw and pvc gitti for independent board point 3 module

S&F in repair Metal claid plug & socket DB 32 Amp 3 pin incl MCB SPN 32 Amp

S&F in repair MCB single pole, 6 to 32 Amps (C series ) having current rating 10 KA complete all as specified and directed.

ditto as items No 1.20 but MCB single pole, 40 A

ditto as items No 1.20 but MCB single pole, 63 A

ditto as items No 1.20 but MCB DP 6 to 32 A

ditto as items No 1.20 MCB double pole 40 Amps

ditto as items No 1.20 MCB double pole 63 Amps

ditto as items No 1.20 but MCB triple pole 40 Amps

ditto as items No 1.20 but MCB triple pole 63 Amps

ditto as items No1.20 but MCB four pole 40 Amps

ditto as items No1.20 but MCB four pole 63 Amps

S&F in repair Copper conductor 1.5 sqmm

S&F Copper conductor 2.5 sqmm

S&F Copper conductor 4 sqmm

S&F Copper conductor 6 sqmm

S&F Copper conductor 1.0 sqmm 2 core rounded

S&F LED driver for 75 watt Street light : Make Crompton/Havells

S&F LED surge protection device 75 up to 150 watt Make Crompton/Havells

S&F LED adore 9 watt 3 star lamp Crompton/Havells/Philips

S&F LED adore 15 watt 3 star lamp Crompton/Havells/Philips

S&F LED adore 20 watt 3 star lamp Crompton/Havells/Philips

S&F Regal Batten for LED tube 1 x 22 watt Make crompton

S&F Crystal Glass LED Tube Light 20 Watt (Double Side Connection) Make crompton

S&F in repair MCCB TPN 125 Amps 415 Volts of breaking capacity 16 KA (Adjustable Thermal and Adjustable Magnetic Release Setting)

All as per Ser Item No 1.42 but 100 Amps with breaking capacity 16 KA.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in PVC concealed conduit with 1.5 SQMM FRLSH cable with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for metal flush box, for one light/Fan/Exhaust fan point. Note:- Coated rate incl for disconnect the existing wall light any type, LED tubelight fitting & LED bulb from holder & celing rose and refix after point wiring up to celing rose.

ditto all as per item no 3.00 above but in PVC cashing caping

Material and labour for replacing old U/S point wiring for One light point contro lled by two 2-way switches, with using 1.5 SQMM FRLSH cable 1100 volts grade in PVC concealed conduit with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for metal flush box

All as per Srl item No 3 above but point wiring for one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed. Note:- Coated rate incl for disconnect the existing bell ding dong from celing rose and refix after point wiring up to celing rose.

All as per Srl item No 3 above but point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per Srl item No 3 above but point wiring for 5 pin switch socket outlet, 5 Amps on same board with other switchescomplete all as specified and directed.

All as per Srl item No 3 above but point wiring for power point one six pin socket outlet, 15 & 5 Amps (independent) controlled by one switch with using 4 Sqm (nominal area) stranded copper conductor complete all as specified and directed.

S&F switch piano, flush type, single pole two way 15 amps complete all as specified and as directed

S&F switch piano, flush type, single pole one way 5 amps complete all as specified and as directed

S&F socket out let 2 in 1, 3 pin 5A, flush type complete all as specified

S&F in repair switch piano, flush type, single pole one way 15 amps complete all as specified and as directed.

S&F socket out let 2 in 1, 5 pin 5A and 15 Amp , flush type complete all as specified Make SSK/L&T

S &F Bell push AC, 50 Hz, 230 Volts, 5 amps complete all as specified. Make SSK/L&T

S&F ceiling rose 3 phase PVC/polycarbonate, isolated body complete all as specified

S&F in repair lamp holder PVC/polycarbonate type with back plate incl mounting box complete suitable for batten fitting isolated body complete all as specified

S&F Ceiling Fan Regulator deluxe 240V 50 Hz step type

M&L for replacing sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating upto and including 1100 Volts drawn in and including in existing cocealed conduit of suitable dia with standard accessories along-with one run of PVC (green colour) insulated , unsheathed, stranded copper conductor of size 2.50 Sqmm as earth continuity conductor complete including taking down all as specified and directed. Note for item here in before : (i) It is not necessary to replace compleate point wiring of any particular Bldg, it will be replace those point wiring get burnt in the Bldg as and when required and directed. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc. for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at RCC Columns/Beams/Ceilings shall be in surface conduit of suitable size fixed on surface with using PVC rawl plugs. (iii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A' (iv) The size of conduits shall be determined on permissible No. of runs of wires as specified in SSR Part-I (2009) clause 19.125 (B). However minimum size of conduit shall be 20mm dia (Medium grade (v) Make of cable : Plaza /Finolex /Havells/Shalabh/ Polycab /HPL /L&T as approved by AGE.(vi) Make of PVC conduit & fittings : AKG / Asian /Plaza/Jindal /Avon/Finolex/National /Kalinga as approved by AGE. )

Disconnecting and taking down the existing Geyser of any description and any capacity (25 / 50 Ltrs) and any position from the existing location and Dismantling the Geyser of any capacity and of any description material and labour for cleaning and de-scaling the inner tank and other parts / accessories including inlet, outlet , overflow Geyser element, thermostat , ‘U’ assembly etc. with brush, cleaning rod, and using de-scaling solution mixed with water in suitable proportion till the complete deposits /scale is removed as approved by Engineer-in-Charge, brazing for stopping leakage of copper inner tank/gas welding for inner steel tank, re- assembling the complete Geyser after cleaning, Fixing and installation of Geyser in position and testing to the entire satisfaction of Engineer-in-Charge. Note :- Spare parts if any requires replacement shall be measured and paid for separately Supply only the following new parts suitable for geyser of capacity 25 /50 ltrs of 2Kw &1.5Kw. however Fixing & testing charges of these items are deemed to be included in the rates quoted by the tenderer for Sch ‘A’ item No. here in above.

Supply only ‘U’ assembly brass type of 25 Ltr cap any description and in any position from Geyser and supply and fixing new ‘U” assembly to match with the existing system complete all as specified and directed. Make – Recold / Bajaj,/ Daspass

Supply only Indicating lamp of size /shape as per existing suitable for 230 Volts AC supply. complete all as specified and directed

Supply only Geyser thermostate of size /shape as per suitable for 25 ltrs & 50 ltr cap heavy duty copper material used 230 Volts AC supply. complete all as specified and directed

Supply only geyser heating element of 1.5 & 2 Kw cap heavy duty copper material used and round cup and triangle cup shape with rubber washer .complete all as specified and directed

Supply only Geyser thermostate for 15 ltr,20 ltr,25 ltr, suitable for new model geyser tempt can adjustable upto 85 degree heavy duty copper material used 16 Amp 230 Volts 50 Hz AC supply. complete all as specified and directed

Supply only Geyser temperature sencer for 15 ltr,20 ltr,25 ltr, suitable for new model geyser tempt can adjustable upto 85 degree complete all as specified and directed

Disconnecting , taking down & removing carefully the existing ceiling fan, exhaust fans, wall bracket fans and air circulating fans etc. of any description, any sweep and from any position / locations (i.e. Md Accn/ OTM Accn / Md Hostel/ Workshop/ Installations/Tech buildings) for repairs / servicing / overhauling / painting / numbering etc, dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing , fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessary adjustment and proper alignment of blades, hanging / fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction complete all as specified and directed. Scope of work shall also included replacement of ceiling fan issuedunder sch 'B' (including notes mentioned here in below ) Note for item 21 here in before : (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) Burnt out windings replaced, shall be measured and paid for separately under appropriate item of Sch ‘A’ for rewinding. (iii) The rates for above items are deemed to include for transportation to & fro of fans to workshop if required and approved by the Engineer-in-charge for necessary repairs. (iv) Remetaling of motor shaft, polishing and grinding and making to standard size to matching with GM Bush shall be measured and paid for separately under appropriate item of Sch ‘A’

Taking out & removing old burnt-out windings of electric ceiling /fans and exthaust fan of any description and rewinding of fan motor with appropriate size super enameled copper wire (Make : Atlas/Finolex/Devi Dayal) as apv. by the Engineer-in-charge including insulating material such as illuminous paper, Letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of Engineer-in-charge for the following Fans:-

Rewinding of motor of ceiling fans 1200/1400 mm sweep

Rewinding of motor of exhaust fans of 250 mm sweep.

Rewinding of motor of exhaust fans of 300 mm sweep.

Rewinding of motor of exhaust fans of 450 mm sweep.

Supply only the following new parts suitable for the ceiling/ exhaust fans, wall bracket fans & pedestal fans, air circulating fans etc. of any description, any sweep Note :- Fixing & testing charges of these items are deemed to be included in the rates quoted by the tenderer for Sch ‘A’ item No.21 here in above.

Supplying only ball bearing No 6200 (Make SKF/NRB/NBC)

Supplying only ball bearing No 6201 (Make SKF/NRB/NBC)

Supply only gun metal bushes of any description and size to suit existing motor shaft including grinding & polishing of fan motor shaft to required shape/size.

Supplying only aluminium cast metal ext fan blade assembly with necessary MS nuts, bolts & washers suitable for exhaust fan fans of any descriptions & of 300/250 mm sweep.

Supply only MS nuts & bolts with one hole washer & lock pin of suitable size for hanging assembly complete.

Taking out the existing loose fitted TPN/SPN DB and LT panels, hang and defective due to locking arrangement and M&L for repair / replacement of locking arrangement, brazing, welding, screwing not & bolts,painting,re fix the existing serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the SPN/TPN DB, making necessary adjustment and proper alignment of items in position, connecting to existing electric sources and testing at site to the entire satisfaction complete all as specified and directed.

Taking down unserviceable street light, gate light, garden light, building security light and M&L for carry out repair and refix the same of the different spares/components /parts of street light/gate light/garden light/post top lantern light fittings,of any wattage/capacity and any description and fixed in any position complete all as specified and directed NOTE (i) Necessary T&P i.e. ladder, tools etc required for checking and making the light fittings in serviceable conditions, its fixing in position and testing shall be arranged by the contractor at his own cost for checking and fixing of street light fittings/security light fittings of any description on poles / on walls / on pillars etc i.e. in any position at site.(ii) Required screws, insulating tapes, internal wiring wire and other minor items excluding the required spares parts for repairing and making the street light fittings/security light fittings in serviceable condition, will be arranged & supplied by the contractor and cost of be arranged & supplied by the contractor and cost of which is deemed to be included in the rates quoted by the contractor in above respective item.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting the fitting to over head ACSR/bus bar box at the bottom of pole with using 1.50 Sqmm two core PVC insulated and sheathed copper conductor cable complete all as specified and directed by Engineer-in-Charge .

M&L in repair existing garden lights of any type and watage with replacement of new in repair integral LED heritage light with 20 watt LED luminaries IP65 aluminium encloser Make:- Crompton LPTH -CDL/WW

Disconnecting, dismantling and taking out the existing unserviceable items of any description, any make and in any position and refixing new supply & fix aluminium 1100 volt grade heavy duty cable PVC insulated aluminium conductor service connection cable twin core flat cable solid conductor 10sqmm Make: plaza /Havells/Kalinga/ polycab

Note : (i) The entire work shall run for 11 months from the date commencement as indicated in the tender documents/work order No 01. Completion before time shall not be entertained by the accepting officer. Site for the entire work shall be given to the Contractor in piecemeal manner and as per user requirement. The Contractor or his rep will report to the Engineer-in –Charge/JE Concerned on day to day basis to received the urgent nature of works and execute the same day to day basis. Non attending/reporting/execution of such nature of works in piecemeal manner a penalty of Rs. 100 per day shall be levied to the contractor. The rates quoted by the Contractor shall be included in the respective item of BOQ. No extra payment shall be admissible to the contractor on this account.

M/S BHATT ENTERPRISES

Amit Engineering

AJA BUILDERS