Maintenance of 11 KV/3.3KV 0H Line, replacement of stay sets, Disc Insulator, Pin Insulator for monsoon Preparation at Sarubera Project under Kuju Area.

Amount

Errection of steel tubular or rail pole strut in cement concrete 1:3:6 foundation including excavation and refilling and secured with holding clamps, bolts, nuts etc as req. Above 100 metre and upto 12.0 metre

Supplying & erection of stay set complete (galvanized) with 19/20 mm dia x 1.8 Mtr long stay rod anchor plate of size 45cm x 45cm x 7.5 mm thimble stay clamp turn buckle (20mm x 60cm) 7/4 00 mm dia G.I wire and strain Insulator etc in cement concrete (Icement 3coarse sand 6 graded stone aggregate 40mm nominal size) foundation including excavation & refilling etc, as required

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium 3 conductor cable of 11 KV grade as required: 705QMM

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 120 sq mm

Supplying and erection of 11 KV pin insulator complete with large steel head G.1. pin, nuts, washers etc as required

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm MS flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Supply of two lengths of channel iron 75mm x 40mm x 7.5Kg/mtr double pole cross arm for 3 wire Oll Line conductors complete with though bolts & nuts for clamping to the poles 50mm x 6mm M.S flats welded on one side the channel iron and with bolts & nuts on the otherside for lying cross arm together including drillin holes for insulators 9 pins/fittings, bolts & nuts etc. and painting with primer and finish paint as required

Erection of pole top/straight two wire/V shape two wire, angle iron/channel iron, cross arm on steel tubular/ rail PCC pole for 11/22/33 KV as required

Erection of ACSR conductor of 7/3 35 mm to 7.4.00 diameter and above including binding etc as required 25 span X 3 wire X 35 MX 394 Kg/Km

Supply and errection of three piece non linear type resistor type lightening arrestor suitable for 3 wire 11 KV OIL line with rated volt. 9 KV(rms) with a nominal current rating of 5 KA and complete with galvanized clamping arrangement, Gl, bolt, nuts, washers etc, as req

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc with charcoal/ coke and salt as required

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc as required

Dismantling of over head lines comprising of copper/aluminium over head conductor, G.1 wire, cross arms, insulators etc. as required

Providing and fixing of 600 Amp. Horizontal/Vertical Type GOAB switch

Total impact of GST for the purpose of CTC

Maa Enterprises (BID ID -1152114)

M/S VAISHALI ELECTRIC COMPANY (BID ID -1150947)