81034 Special repairs to building No P 81 Champa at INS Dronacharya

Amount

Taking down existing water proofing treatment of any thickness from the roof including cement mortar bedding , PCC tiles,padding concrete if any, upto the RCC slab, removing debris off the premises and cleaning the roof complete all as specified

Cutting the V grooves on the terrace slab where ever cracks are observed and fill the grooves with Fosrocs heavy duty non shrink grout Convextra GP2 , coving all the 90 degree angles , slab/wall junctions with Conbextra GP2 all as per manufacturer's instruction.

M&L providing a levelling course of cement concrete type B-0, 1:2:4, using 12.50 mm stone aggregate, average 25 mm thick maintains a slope towards the drain water pipes by adding a water proof admixture as per Manufacturer's Instruction complete all as specified. Note :-Admixture shall be measured and paid seperately

M&L for rendering with CM 1:3, 10 mm thick mixed with water proofing admixture of Fosroc/Pidilite or equivalent , all as specified and directed.Note :-Admixture shall be measured and paid separately.

M&L for applying oil based bitumen primer @ 0.25 kg/sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4kg/sqm having softening point not less than 140 degrees C, longitudinal tensile strength not less than 650 N/Sqcm, tearing strength of 180 N by torch application including min 10 cm side over lap and 15cm end lap, finishing the surface with solar reflective bituminous aluminium paint complete all as specified.

Supply only liquid water proofing admixture.

M&L for chip and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars, removing the debris outside MD land as directed by Engineer-in-charge.

M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface complete all as specified and all as directed by Engineer-in-charge.

M&L for supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd.) or Amandur ,(manufactured by GK technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application complete all as directed by Engineer-in-charge.

M&L for plastering with Nitobond SBR (Styrene butadin polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltd) modified cement mortar (1:3) under the slab to a maximum thickness of 40 mm , including the cost of all materials rent of tools and labour charges etc complete all as directed by Engr-in-charge.

M&L for Providing additional reinforcement bars of 10mm dia and over in place of more than 1/3 corroded reinforcement bars including the charges for cutting , bending, placing and fixing in position using Lok-Fix (Manufactured by M/s Fosroc Chemicals India Ltd) complete Including the cost of steel bars.complete all as directed by Engineer-in-charge.

M&L for providing and fixing of shear connectors of 8 mm dia inside 12 mm dia holes at 50 mm deep @ 500 mm C/C after cleaning the holes to remove the dust particles and fixing the shear connectors using Lokfix S ( Manufactured by M/s Fosroc chemicals India Ltd) polyster resin anchor grout complete all as directed by Engineer-in-charge.

M&L for rendering 15 mm thick in two coats (10 mm thick in cement mortar 1:6 and 5 mm thick in cement mortar 1:4 mixed with water proofing compound) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. (Note- water proofing compound shall be measured and paid separately) .

M&L for plastering in CM 1:6, 10 mm thick on walls finished even and smooth w/o using extra cement.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L PCC 40 mm thick, type B-1, 1:2:4, using 20 mm graded stone aggregate as in levelling the undulated floor area all as specified and as directed.

M&L 10 mm thick screed bedding layers in cement mortar 1:4 for laying floor finishes tiles .

M&L Joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L Rendering 10 mm thick in CM 1:3 on brick or concrete surfaces , finished fair and even .for receiving wall tiles.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour to match complete all as specified.

M&L for glazed ceramic tiles, coloured of size 300 x 400/450 x 7 mm thick as in dado/skirting and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M&L 20 mm thick screed bedding layers in cement mortar 1:4 for laying kota stone/ cement concrete tiles.

M & L machine cut mirror polished kota stone slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in cooking plateform all as specified and as directed. (Note- Screed shall be measured and paid separately)

M & L machine cut kota stone slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in steps, skirting, stair case, one piece to stair case all specified and as directed. (Note- Screed shall be measured and paid separately)

M&L for rounding to edges of stone slab one edge, such as in steps , cooking platforms and similar situations

M&L for chequered cement concrete tiles, 25 mm thick, set, jointed and pointed with neat cement slurry in floors fixed with white cement and pigments. (Note : Colour and pattern and size to be approved by GE and Screed shall be measured and paid separately).

Taking down chowkats or frames exc. 1.5 Sqm and not exc 4.00 sqm each with shutters (without taking off shutters from the frame).

Taking down chowkats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frame).

Taking down old unserviceable aluminium windows with frame and grills complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails . MS frame shall be covered with heat moulded palin colour PVC 'C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the M s frame welded/sealed to the stiles & rails with suitable PVc sheet beading and joined together with solvent cement ,supplying & fixing in the frame at site as per specification & drawing.

S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing

M&L for second class hard wood plain, solid, straight chowkats and frames wrought framed rebated (one or two) on the solid, rounded or chamfered put together with glue pinned at joints

S&F mild steel hold fasts confirming to Fe-290 Gde E-165 for fixing chowkats complete all as specified

M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in bed blocks for fixing hold fasts.

M&L for preparation of wooden surfaces and wood based material of any description and any girth not otherwise described and treated with tar or coal tar black paint complete all as specified.

M&L preparation of surface of steel and iron work new or old of any description and girth not otherwise described and treated with tar or coal tar black paint small articles such as hold fasts ends of post ,etc area n.exc 0.1 sqm each complete all as specified.

S&F 35mm thick 2nd class hardwood (factory made) plain framed panelled shutters (two panels) with lock rail and panels of 12 mm thick veneered particle board with commercial veneering on both sides or 9mm thick BWR commercial ply and fixed to chowkat/frame complete. The size of rails and styles of 2nd class hard wood as per IS 1003 (Part-I). Kiln seasoned & chemically pressure treated complete all as specified.

S&F II class hard wood 30 mm thick glazed and skelton shutters open rebated and prepared to receiving glass, gauge (without sash bars), edge of forming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. Size of members of shutters as specified in SSR Part I.

S&F Aluminium alloy wire cloth, 0.45 mm, nominal dia of wire and average width of aperature 1.40 mm and fixed with rubber beading all as specified and directed.

S/F stainless steel butt hinges 125mm size medium weight.

S/F butt hinges 75 mm extruded aluminium alloy with galvanized mild steel hinge pin, anodised C-21

S&F extruded aluminium alloy handles,fabricated type anodised 150 mm size complete all as specified.

S&F extruded aluminium alloy handles,fabricated type anodised 100 mm size complete all as specified.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm size.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy.

S&F mortice lock brass 4 levers vertical type 100 mm

S&F mortice lock brass 4 levers vertical type 75 mm

Supply and fix Aluminium windows casement type (34 mm Series) powder coated aluminium sections with and including 5 mm thick plain sheet glass/frosted glass panes of openable type with rubber lining, Casement type (34 mm Series) sections for mosquito proofing windows with aluminium alloy wire cloth , 0.45 mm nominal dia of wire and average width of aperture 1.40 mm in three panes divided with mullion section sash bars and aluminium standard decco grills 10 mm thick, fixed in with 1.3 mm thick standard aluminium "F" channels etc complete with following sections of HINDALCO or equivalent. (a) "H" frame 44.50 x 34.00 x 2.00 mm Section No 2082 (b) "Z" shutter 34.00 x 44.50 x 2.00 mm Section No 4124 (c) Mullion 57.00 x 34.00 x 25.00 mm Section No 9139 (Note:- The rates are inclusive of 5mm thick plain glass, aluminium alloy wire cloth, SS friction hinges grade 304(Eye Max) for aluminium windows , jointing cleats, rubber beading, "U" channels, handles, locking arrangements etc. complete.)

Dismantling wrought iron or mid steel work of any description not otherwise provided for etc. all as specified and as directed.

S&F stainless steel grills/railings fixed to walls/floors of Grade-316 including all pieces, drilling holes, sweling, buffing, complete all as specified and as directed.

Demolition of brick masonry built in cement mortar or cement lime mortar.

M & L precast cement concrete block masonarywith solid blocks, exc. 10 cm in width and setting in CM 1:6 type C1, 1:3:6 (20 mm graded stone aggregate)

M&L Rendering 10 mm thick in CM 1:4 on brick or concrete surfaces, finished even and smooth without using extra cement.

M&L for powder coated aluminium frame , shutters & sections for doors , windows , ventilators ,Cup boards ,including necessary rubber beading, locking arrangements etc. complete

M&L for fixing in repairs both side pre laminated MDF board 12 mm thick exterior grade fixed with SS screws to timber/aluminium frame work in cup board.

M&L for fixing in repairs both side pre laminated MDF board 18/19 mm thick exterior grade fixed with SS screws to timber/aluminium frame work in cup board .

M&L for 6 mm thick teak wood lipping, fixed with nails on MDF board 18/19 mm thick.

All as per item No 57 above but 12 mm thick MDF board.

M&L providing and injecting chemical emulsion for post constructional Anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 ltr per linear meter including drilling and plugging holes etc in apron etc complete all as specified and directed.

M&L for treating points of contact of wood work with masonary / concrete by chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

M&L for treating soil under existing floor at internal junctions with wall using chemical emulsion @ 1.00 ltr per hole , 300 mm apart including drilling and plugging 12 mm dia holes with CM 1:2 (1 cement : 2 coarse sand) to match the existing floors , all as specified and directed.

M & L for Wood Borer treatment for doors & windows with bifenthrin 2.5% oil based chemical spraying uniformly 1 Litre/per Square metre all as per manufacturer's instruction and as directed by the Engineer-in-charge.

M&L for sealing and grouting the mouth of all pipes using Fosrocs non shrink grout Conbextra GP2 or equivalent , For dia of pipe 110 mm all as per manufacturer's instruction and as directed by the Engineer-in-charge.

M&L for sealing and grouting the mouth of all pipes using Fosrocs non shrink grout Conbextra GP2 or equivalent , For dia of pipe 75 mm all as per manufacturer's instruction and as directed by the Engineer-in-charge.

S & F in repairs vitreous china wash down water closet (Pedestal pattern) white with 'P' trap complete including plastic seat cover white closed pattern with flat bottom, and cover with plastic hinges complete all as specified.

S&F in repairs vitreous china wash basin, white flat back, size 550 X 400 mm excluding taps, fixed to wall by anchor bolts , waste coupling, waste pipe etc complete .

S & F in repairs PVC low level flushing cistern 10 Ltr capacity incl float valve and flush pipe complete

S&F in repairs fancy type pillar taps cast copper alloy, with capstan head, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm.

S&F in repairs PVC connections , 15 mm size with PTMT nuts of length 600mm..

S&F in repairs Towel rail chromium plated, D type, 600mm long between flanges complete all as specified and as directed.

S&F in repairs door closer aluminium (extuded section) body hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws Complete all as specified and directed

S&F in repairs Stainless steel soap dish fixed with SS screws .

S&F in repairs anodised aluminium alloy body door stopper 150 mm size

S&F in repairs drapery curtain rods 25 mm powder coated including ornamental brackets and fixing hooks and rollers, side dooms as per sample complete fixed in repairs.

S&F in repairs sinks with drainage boards made of stainless steel 1 mm thick kitchen with plugs , washers and waste; including bedding in cement mortar to dwarf wall/Granite or including fixing and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete (sink counter sunk into granite platform) .

M&L for preparation of old decorated/ treated external wall surfaces by scrapping , washing , rubbing down and stopping of surfaces of wall complete all as specified.

M&L for two coats of Antifungal paint over a coat of Exterior primer over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfaces all as specified and directed. Note : Height of the Bldg is G + 4.

M&L Preparation of old plastered surfaces and other surfaces of ceiling by complete removal of existing treatment, and applying two coats of distemper oil emulsion on ceiling over a coat of primer of alkali resistant priming paint complete all as specified

Complete removal of internal existing treatment wall complete all as specified and directed.

M&L for averaging 2.00 mm thick wall care putty on walls

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer ,plastered and other surface with alkali resistant priming paint complete all as specified.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old treated wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

S & F 32 mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or copnnections including necessary packing,union and cap and fixed complete all as specified

S & F 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified.

Demolition of PCC (un re-inforced) of any description and in any position not otherwie specifically provide for.

M&L PCC 75 mm thick, 1:3:6 (Type C1) using 20mm graded crushed stone aggregate as in plinth protection.

M&L PCC 1:3:6 (Type C1) using 20mm graded crushed stone aggregate as in surface channels and drain

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

M&L in repairs for PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall GI brackets /clamps all as specified and directed ( the portion of pipe inserted to the masonery /slab shall be fixed with water proofing bathseal tape two way to the entire width of masonry/slab.) . Note:-Pipe are to be fixed away from the wall using suitable clamps and bolts.

As in item No 93 above but 75 mm dia

S&F PVC SWR bends 110 mm dia of any radius with access door

S&F PVC (SWR) bends 75 mm dia of any radius with access door

S&F PVC vent cowl 110 mm dia

S&F PVC vent cowl 75 mm dia

Disconnecting existing PVC water tanks exc 1000 ltrs & not exc 2000 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position.

S&F SS self closing hinges fixed with SS screws to shutter complete all as specified.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.6mm thick with 3 mm thick plastic laminated sheet top cover brass screws cup washers etc and making good distrubed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amps.

All as per srl item No 102 here-in-before but one bell controlled by one bell push, 06 Amps, single pole, one way, point

All as per sr item No 102 here-in-before but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 5q mm size.

All as per sr item No 102 here-in-before but one 3 pin socket outlet 05 Apms on the same board with other switches with with cable 1.5 sq mm size.

All as per Serial Item No 102 here-in-before but one 3 pin socket Per outlet, 15 Amps, independent with cable 2.5 Sq mm size

Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix bell push flush, 06 Amp, Volt complete all as specified & directed

Supply and fix switch socket combination outlet 2 in 1, 5 pin, 06 Amp flush type, universal, 230 volt, four hole complete all as specified and directed

Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix ding dong bell, AC, 230 volts, single pole complete all as specified & directed

S & F stepped type electronic fan regulator flush type AC, 230 volts, on the existing complete all as specified & directed

Taking down carefully ceiling fan / exhaust fan of any sweep each complete with all accessories, dismantling blades and kept in safe custody including painting complete with rewinding using synthetic enamel copper wire and paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging and connecting up with provn of 3 core copper flexible cable of size 1.5 Sq mm from ceiling rose to fan complete all as specified & directed.

Supply and fix decorative wall mounting type LED light fitting, 1 x 9/10 Watt, 230 Volt made up of Polycarbonate including lamp with holder, etc and all accessories pre-wired including connecting up complete all as specified and directed. Make : Havells City 3 or equivalent make in Crompton /Philips

Supply and fix downlight LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate and all accessories pre-wired including connecting up complete all as specified and directed. Make : Havells cat part No INTEGRANEOSURFA CEDLS15WLED840S or equivalent make in Crompton /Philips

Supply and fix LED security light 40 W IP 65 connecting upwith twin core twisted flexible copper conductor cable with suitable sizealong with provision of 25 mm dia GI pipe bracket long 4 feet with 135 degree bend fixed on wall with all fixing accessories like clamps nuts bolts etc complete all as specified Make: Havells Cat part No ENDURAPEARLNEOSL40WLED757PASYTOPC or equivalent Cropmpton / Philips

Supply and fix in replacement of surface mounted LED tube light fitting four feet long, 22 Watt with IP 20 protection comprises of aluminium extruded channel, extruded aluminium body, integrated electronic driver, etc and all accessories pre-wired including connecting up complete all as directed. Make : Havells Cat part No LUMILINEPLUSBS22WLED865SPCSS or equivalent Cropmpton / Philips

Supply and fix ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified directed.

Material and labour for wiring for circuit / sub main wiring with 2 x 6.0 Sq mm alongwith 1 x 6.0 Sq mm earth wire of FRLS PVC insulated copper conductor, single core cable drawning into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall where as possible by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

S&F in repair sheet metal enclosure DB SPN AC 240 Volts 8 way with 200 nAmps rated bus bar and double door complete all as specified

Supply and fix in repair of MCB, SP, AC, 240 volts of 06 to 32 Amps capacity complete all as specified & directed..

Supply and fix in repair of MCB, DP, AC, 240 volts of 63 Amps capacity complete all as specified & directed.

Supply and fix in repair of sheet metal enclosure distribution board, triple pole and neutral, vertical type, AC, 415 volt, 04 way with 200 Amp rated copper bus bar and double door complete all as specified & directed and comprising of the following : (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete 01 No (b) MCB, SP, AC, 240 volts of 06 to 32 Amps capacity complete - 12 Nos.

Taking down carefully electric meter of any capacity after disconnecting the electric supply, from existing panel keeping aside in safe custody, painting of meter box with two coats of enamelled paint over a coat of primer and refixing the energy meters after rewiring complete.

Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in Set ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel Gl protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part 2009 and connected to main switch board / Main DB's including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, Gl pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion and taking out the unserviceable old earthing materials complete all as specified and directed.

Taking out old unsv GI pipe 15mm bore with all connecting accessories complete from wall/floor all as specified

Taking out old unsv GI pipe 20/25mm bore with all connecting accessories complete from wall/floor all as specified

Supply and laying of CPVC pipes 20mm outer dia SDR 11 & plain CPVC 11 fittings laid on wall/ ceiling or laying in floors compete all as specified.

Supply and laying of CPVC pipes 25mm outer dia SDR 11 & plain CPVC 11 fittings laid on wall/ ceiling or laying in floors compete all as specified.

Supply and fix in repairs 15mm bore bib tap long body half turn, cast copper alloy chromium plated with crutch or butterfly handle, complete all as specified and directed.

Supply and fix in repairs 15mm stop valves, cast copper alloy chromium plated fancy type with long shank and cup (concealed type) crutch or butterfly handle complete all as specified.

Supply and fix in repairs 25mm stop valves, cast copper alloy chromium plated fancy type with long shank and cup (concealed type) crutch or butterfly handle complete all as specified.

Supply and fix in repairs shower rose 125mm size with 300mm long arm chromium plated with swivel joints suitable for fixing to 15mm pipe or union all as specified complete.

K.V.GEORGE AND COMPANY

T.I.John and Sons

ZOOM ENTERPRISES

K R JOSEPH AND SONS

SHAIJAL T M