Construction of HPPWD Division office Building at Indora Distt.Kangra H.P

Amount

Excavation in foundation trenches etc. in all kinds and classification of soil such as pick work, pick jumper work, pick and jumper work, blasting work, (soft or hard rock), saturated soil, dewatering including wedging out rock where blasting work is prohibited, chiseling or any other mixed variety of soil de-watering and/or removal of slush, stacking the excavated soil not more than 3 mtrs. (Three metres) clear from the edge of excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers when required into plinths, sides of foundations etcetra, consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per HPPWD specification,approved Drawing,design to the entire satisfaction and direction of the Engineer-in Charge including carriage of material within all leads, lifts and other incidentals.The rates is inclusive of octroi, royality, malkhana, toll tax,GST and any other taxes as imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by government

Providing form work with steel plates 3.15 mm (three decimal one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and heights propping etcetra with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation Footings, basis of columns etcetra and mass concrete including entire carriage of materials work in all leads, lifts and other incidential as per drawings, technical specifications or as per the direction of Engineer-in-Charge .The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three decimal one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies,heights of propping and centring in all heights/depths below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings,balconies and access platform, shelves and the like floor etcetera In all thickness upto all floor level including entire carriage of materials within all leads,lifts and other incidential as per drawings and technical specifications or as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three decimal one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies heights of propping and centring in all heights below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, Pillars,Piers,Abutment,Posts and struts upto all floor level including entire carriage of materials within all leads lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three decimal one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls ( any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all all floor level including entire carriage of materials within all leads lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, heights of propping and centring in all heights/depths below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels Sides and soffits of beams,beam haunchings, cantilevers, girders, bressumers and lintels upto any height/depth upto all floor level including carriage of materials with in all leads, lifts and other incidential as per drawings, technical specifications and as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting, propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Stair Cases with sloping or upto all floor level including carriage of materials, with in all leads,lifts and other incidentials as per drawings, technical specifications and as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting, propping etcetra with wooden battens and ballies, heights of propping and centring in all heights below supporting floor to ceiling upto any height and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls width upto all floor level including carriage of materials within all leads, lifts and other incidential as per drawings, technical specifications and as per the direction of Engineer-in-Charge .The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement :four coarse sand : eight graded stone aggregate 40mm ( forty milimetre nominal size) and curing complete excluding cost of form work in foundation and plinth in all depth as per HPPWD specification, approved Drawings, design as per the entire satisfaction and direction of Engieer in charge including carriage of material, within all leads lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Squared rubble masonary ( first sort) coursed with hard stone in foundation and plinth of approved quality in foundation and plinth including racking out joint in cement mortar 1:6 (one cement isto six sand) in all heights/depths or as per the direction of Engineer-in-Charge including carraige of materials with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the compressive strength of 20N/mm2 (Twenty newton per square millimetre) for reinforcement cement concrete work with cement content not less than 330 kg (Three hundred thirty kilogramme) per cubic metre or as per approved design mix for All works upto plinth level to give a smooth surfaces the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion as per IS:9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work complete including carraige of materials within all leads, lift and other incidentals as per specifications approved drawing, design and directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the compressive strength of 20N/mm2 (Twenty newton per square millimetre) for reinforcement cement concrete work with cement content not less than 330 kg (Three hundred thirty kilogramme) per cubic metre or as per approved design mix for All above plinth level to all floor level to give a smooth surfaces the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion as per IS:9103 to accelerate, retard setting of concrete , improve workability without impairing strength and durability for reinforced concrete work complete including carraige of materials within all leads, lift and other incidentals as per specifications approved drawing, design and directed by the Engineer-in-charge. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing mild steel,Tata /tor steel(Tiscon /SAIL make) reinforcement Thermo mechnically treated bars of grade Fe-500D for RCC work including column bending, binding and placing in position complete as per HPPWD specifications, approved Drawing,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying damp proof course 100mm ( One hundred millimetre) thick with cement concrete 1:2:4 (one cement: two sand:four stone aggregate) 20mm ( Twenty millimeter) nominal size and curing complete as per entire HPPWD satisfaction, approved drawing, design and as per the entire satisfaction and the direction of Engineer-in-Charge including carriage of materials, within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 ( Eighty / one hundred) using 1.70 kg.(one decimal seven Kilogramme per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil complete as per HPPWD specifications, approved Drawing design and as per the entire satisfaction and the direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Filling in plinth with stone filling under floors including watering ramming , consoldating and dressing complete as per approved drawing , design, specification as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government

Brick work using second class common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (one Cement isto six Sand) and curing complete as per approved drawing, specifications and as per direction and entire satisfaction of the of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in super-structure above plinth level upto all floor level in Cement Mortar 1:6 (one Cement isto six Sand) and curing complete as per approved drawing, specifications and as per direction and entire satisfaction of the of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and other taxes imposed by the Government.

Half brick masonry using second class common burnt clay building bricks in super structure above plinth level upto all floor level in Cement Mortar 1:4 (One Cement isto Four Sand) and curing complete as per approved drawing,design, specification as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of second class common burnt clay building bricks cavity wall 40 c.m ( Forty centimeter) thick with 17 cm ( Seventten centimeter) wide cavity and consisting 11.5 c.m ( Eleven point five centimeter) thick inner and outer wall laid in cement mortor 1:3( One cement isto three sand) and strengthed with loop iron and bituminious coated cross tiles including making weep hole and vent pipe complete 2 Nos. 6/8mm dia bars in Z-shape crossing each other shall be provided at the interval 90-100 c.m ( Ninety to One hundred centimeter) length horizontally and vertically wall and curing complete ( The measurements of walls faces only one side will be considered for payment) complete as per approved drawing, design, specification and as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Coloured anodised aluminium ( anodised transparent or dyed to required shade according to IS:1868. Minimum anodic coating of grade AC 15) sub frame work for door, windows and ventilators of section No 14081 of Jindal/Hindalco with extruded built up standard tubular sections, fioxed with dash fastener or required dia and size As per specification, Drawing and direction by the Engineer-In-Charge including carriage of material with in all lead, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying size of tiles 600mm x 600 mm ( Six hundred into Six hundred millimeter) full body Matt finish vitrified floor tiles of RESTILE/JOHNSON/ NITCO/RAK/KAJARIA/AGL/ SOMANY/SIMPOLO as per approved shade and design of the office ( thickness to be specified by the manufacture)in flooring with water absorption less then 0.08% and conforming to IS: 15622 of approveed make, in all colours and shades, laid on 20mm ( Twenty millimeter) thick cement mortar 1:4 ( One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etcetra, complete as per approved drawing, design, specification and direction by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and Laying size of tiles 600mm x 600 mm ( Six hundred into Six hundred millimeter) double charge/ultra charged vitrified floor tiles of RAK/JOHNSON/NIRCO/KAJARIA/AGL/SIMPOLO/SOMANY/ORIENT & BELL as per approved shade and design of the office ( thickness to be specified by the manufacture) in flooring with water absorption less then 0.08% and conforming to IS: 15622 of approveed make, in all colours and shades, laid on 20mm ( Twenty millimeter) thick cement mortar 1:4 ( One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including curing grouting the joints with white cement and matching pigments etcetra, complete as per approved drawing, design, specificatio and as per direction by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying full body matt finished vitrified tile of RESTILE/ NITCO/RAK/KAJARIA/AGL/ SOMANY and JOHNSON of approved shade and design of the office ( thickness to be specified by the manufacture) with water absorption less then 0.08% and conforming to IS: 15622 of approveed make, in all colours and shades in skirting, riser of steps, laid on 20mm ( Twenty millimeter) thick cement mortar 1:3 ( One cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including curing grouting the joints with white cement and matching pigments etcetra, complete as per approved drawing, design, specificatio and as per direction by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying Double Charged/Ultra charged vitrified floor tile of NITCO/RAK/ KAJARIA /AGL/ JOHNSON /ORIENT & BELL /SIMPOLO /COMANY AS PER of approved colours and shades in skirting, riser of steps, laid on 20mm ( Twenty millimeter) thick cement mortar 1:3 ( One cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including curing grouting the joints with white cement and matching pigments etcetra, complete as per approved drawing, design, specificatio and as per direction by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying 8 mm ( Eight millimeter) thick Teak ply peneling over 50 x 31 mm ( Fifty one into thirty one millimeter) soft wood grid frame work at 600 mm ( Six hundred millimeter) C/C with decorative teak wood beading over teak ply of size 25 X 12 mm ( Twenty five into Twelve millimeter) having moulding on both side cornice / edging on top of peneling to be finished with 55 X 30 mm ( fifty five into thirty millimeter) teak wood beading as per detail ,drawing and specification as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and laying mirror polished 25 mm ( Twenty five millimeter) thick Kota stone minimum Size 55X55cm ( Fifty five into Fifty five centimeters) / 55 X 27.5 cm (Fifty five into Twenty seven point five centimeters) of uniform colour with 7.5 cm ( Seven point five centimeter) wide Jaislmer Yellow marble band of same shade that of flooring/skirting of approved shade as per detail slab flooring over 20 mm ( Twenty millimeter average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including curing rubbing and polishing complete with base of cement mortar 1 : 4 ( One cement isto four coarse sand) complete as per as per approved drawing, design, specification and as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes texes imposed by the Government.

Providing and laying 300x300mm (three hundred into three hundred millimeters) Antiskid Ceramic tiles of premimum quality of NITCO/KAJARIA /JOHNSON /AGL/SOMANY/ORIENT and BELL in flooring of 12mm (Twelve millimeters) thick cement mortar 1:4 ( One cement isto four coarse sand ) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights curing complete as per approved specifications, drawing and design and as per direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and laying 300x600mm (three hundred into three hundred millimeters) Ceramic Glazed tiles of Kajaria / Johnson /Swastik /Orient & Bell / Somany / AGL (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm ( Twenty millimeter) thick cement mortar 1:4 (One Cement isto Four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etcetera complete as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T or any other texes imposed by the Government.

Providing and laying 300x450 mm ( Three hundred into Four hundred fifty millimeter) Ceramic Glazed floor tiles of Kajaria / Johnson /Swastik /Bell / Somany / AGL with one border matching contrast at top as per approved shade (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm ( Twenty Millimeter) thick cement mortar 1:4 ( One Cement isto four Coarse sand) in skirting / Dado , jointing with grey cement slurry @ 3.3 kg/ sqm including curing grouting the joints with white cement and matching pigments etectra complete as per approved drawing, design, specification and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentials.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design(Rainbow series ) of NTC / Unistone / Atlantic slab flooring in ramp over thick on 20mm (twenty millimetre) average thick base of cement 1:5 (One cement isto five coarse sand) including Painting with two stone dust jointed with an admixture of pigment to match the shade of tiles including curing rubbing and polishing, cutting and moulding complete as per approved drawing, design, specification and direction by the Engineer-in-chage including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and fixing 19 mm ( Nineteen millimeter) thick Grey /Chima Pink Granite ( Partially plamed) single slab with double round nosing in treads/single slab in riser of steps, approved shade, colour and texture laid over 20 mm ( Twenty Millimeter) thick base cement mortar 1:4 (One cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etectra complete at all level complete as per approved drawing, design, specification and direction by the Engineer-in-chage including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and fixing 19 mm ( Nineteen millimeter) thick polished Grey / Chima pink Granite with round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20 mm ( Twenty Millimeter) thick base cement mortar 1:4 ( One cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete at all level as per approved drawing, design, specification and direction by the Engineer-in-chage within all leads, lifts and other incidentals.The rate is including of octroi,royality, malkhana toll tax, sale tax, G.S.T and any other texes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto Six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and other taxes imposed by the Government.

Providing and applying 15 mm ( Fifteen millimeter) thick in cement Plaster With cement Mortar 1:6 (One cement isto Six coarse sand) in single coat of rough side of brick/ concrete/ stone walls for interior plastering upto all floor level including arrises internal rounded angles, chamfers and rounded angles in all girth and finished even and smooth and curing complete as per approved drawing, design, specification directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four coarse sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic stone cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and curing as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge .The rate is including of toll tax, GST and any other taxes imposed by the Government.

20 mm( Twenty Millimeter) Thick Pattern in cement Plaster With cement Mortar :1:4 (1 cement: 4 coarse sand) curing complete as per approved drawing, design, specification and as per directions and entire satisfaction of engineer in charge including carriage of material with in all leads , lift and other incidentals . The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and applying white cement based putty of Birla / JK average thickness 1 mm ( One Millimeter) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specification and as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Finishing wall with Apex weather proof exterior grade emulsion of ( ASIAN/NEROLAC/SURAKSHA of Nerolac paint BERGER/DULUX) paints of approved shade having VOC less then 50gm/litre and UV reistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives two or more coats applied @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm with in all leads, lifts and other incidential as per approved drawing, design, specification and direction by the Engineer-in-charge including carriage of materials . The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Wall finishing two or more coats with Acrylic washable Emulsion of Asian Paints/ Nerolac Paints / Berger Paints / Dulux Paints Above Dado / skirting as per Approved from this office complete as per approved drawing, design, specification and direction by the Engineer-in-charge including carriage of material within all leads , lift and other incidentals . The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Wall finishing two or more coats with Premium Emulsion of Asian Paints/ Nerolac Paints / Berger Paints / Dulux Paints Above Dado / skirting as per Approved from this office as per approved drawing, design, specification and direction by the Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Wall finishing two or more coats with Acrylic Emulsion of Asian/ Nerolac Paints / Berger Paints / Dulux Paints Above Dado / skirting s per Approved from this office as per approved, drawing, design,specification and direction by the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing powder coated anodized aluminium work with Zindal/Hindalco aluminium extrusions built up standard tubular and other section of approved make conforming to IS-733 and IS-1285 anodized transparent or dyed to required shade according to IS-1868 minimum and coating of grade AC (15) fixed with rawl plugs and screws or with fixing clips or with expension hold fasteners including necessary filling up of gaps and junction and top and bottom, side with required PVC/Neoprene fill etc. aliminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required including cleat angles, aluminium snap leading for glazing/panelling, CP brass stainless screw all complete in shutters of doors,window and ventilators including providing and fixing hings/pivots and making provision for fixing of fitting where ever required including the cost of PVC/Neoprene gasket required as per the architectural drawings design, specification and as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing Modi Guard/Saint Gobain in aluminium doors, window, ventilators shutters and partition with PVC/Neoprene gasket etc. complete in glazing with glass pans of 6.00 mm (Six millimetres) thickness weight not less than 15 kg (fifteen kilograme) per square metre as per approved drawing, design, specification and and as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing with glass pans of 5.00 mm (five millimetre) thickness weight not less than 12.50 kg (twelve point fifty kilograme) per square metre (Modi Guard/Saint Gobain) in aluminium door, window,ventilator shutters and partition etc with PVC/neoprene gasket etcetera complete as per the architectural drawings, design, specification (cost of aluminium snap beading shall be paid in basic item) and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 5 mm (five millimetre) thick weight not less then 12.50 kg/sqm (twelve point fifty kilograme Per Square meter) frosted glass panes of Modi Guard/Saint Gobain in aluminium door, window, ventiation, shutter and partition etectera with PVC/necessary gasket etcetera complete in jointing complete as per approved drawing, design, specification as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg ( One hundred Twenty five kilogramme) for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete as per approved drawing, design, specification and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentials With stainless steel cover plate minimum 1.25 mm ( One Point Twenty five millimeter) thickness. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubulartype universal hydraulic door closer (having brand logowith ISI, IS : 3564, embossed on the body with necessary accessories and screws complete and as per approved design, drawing, specification and as per the direction of Engineer-in-Charge including carriage of materuial within all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing wire fly proof stainless steel ( Grade 304) wire guage of 0.5mm ( Zero point five millimeter) dia wire and 1.4mm aperture on both side in windows, clerestory windows and doors with S.S Flat 15x3mm ( Fifteen into Three millimeter) and bolts complete and as per the direction of Engineer-in-Charge including carriage of materials within all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium (Zindal/ Hindalco make) anodized powder coated grill of 8mm ( Eight Millimeter) thick Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. (Only weight of grill to be measured for payment) complete as per approved design, specification and as per the direction of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 12 mm (twelve millimetre) thick door shutter in fill panel both side prelaminated water proof particle board with decorative lamination on both sides of Action Tessa/Centuary/Kitlam/Kitply, Green ply three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etceter complete as per architectural drawings ,design,specification and directions of engineer- in-charge with in all leads , lifts and other incidentals.The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm (thirty millimetre) thick factory made PVC panelled door shutter ( code No. 2.120) of Rajshri consisting of frame made out of M.S. tubes of 19 (nineteen) gauge thickness and size of 19mm x19mm (ninteen into ninteen millimetre) for styles and 15mmx15mm (fifteen into fifteen millimetre) for top & bottom nails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm (thirty millimetre) thickness, 70mm (seventy millimetre) width cut of which 50mm (fifty millimetre) shall be flat and 20mm (twenty millimetre) shall be tapper in 45 degree angle on either side forming style and 5mm (five millimetre) thick, 95mm (ninty five millimetre) wide, PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm (one hundred fifteen millimetre) wide PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (ten millimetre) thick, 20mm (twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S. butt hinges with necessary screws etcetera complete as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimetre) thick ply board water proof ISI marked of kitlam/Action/Tessa for 5DB shutter (Century ply) with 6 mm (six millimetre) thick hard wood edging all around and 0.63 mm (zero decimal six three millimetre) thick sheet lining in side fixed with piano hings with screw complete as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing the complete box of cup board sahll be made of 25mm (Twenty Five millimetre) thick water proof termite resistant ply board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging/ eighing. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa/Merinalum and 19 mm (Nineteen millimetre) thick board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino including hinges, PTMT handle in wood colour of Prayag Polymers,knob megnatic catcher complete ( The outer face of cup board shall be measured for payment only) as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Stainless steel Knock Down Railing of KICH AISI 316 of 38 mm ( Thirty Eight Millimeter) dia handrail fixed on 10x50 mm ( Ten into Fifty Millimeter) S.S. Flat baluster ( Design Code DT53-2-163) placed at 1200 mm ( Twelve Hundred Millimeter) C/C Along with with 3 Nos @16mm Mid rails connected at the side of baluster with fixtures the baluster would be fixed on to floor with casted base plate of minimum 6mm ( Six Millimeter) thickness base plate shall be concealed with suitable S.S 316 Grade cover cape ailing height to be taken @ 85 mm ( Eighty Five Millimeter) from floor level complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing hand rail 50mm ( Fifty Millimeter) dia. SST hollow pipe handrail slip resistant with round ends at two levels at 75 Cm & 90cm Ht. It should extend 30 c.m ( Thirty Centimeter) beyond the top and bottom of the ramp as per detail welded to 25 cm ( Twenty five centimeter) dia SSt hollow pipe baluster welded to 50mm ( Fifty mMillimeter) dia Pipe embadded in cement concrete 600mm ( Six hundred millimeter) C/c as per detail & PWD specifications of approved size by welding etcetera to steel ladder railing, balcony railing, staircase railing and similar works as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 40 mm/50 mm ( Forty Millimeter/Fifty Millimeter) dia SST Pipe Grab bars fixed with wall and floor as per detail and specificationincluding welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete as per approved drawing, design, specification and as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x600x6mm ( Six Hundred into Six Hundred into Six Millimeter) panels of Alluminium Composite panel(ACP) ceiling in Toilet with pre-painted G.I channel framing @ 600mm ( Six Hundred Millimeter) C/c as per detail complete as per approved drawing, design,specification and as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and Fixing 600x600x6mm ( Six Hundred into Six Hundred into Six Millimeter) dune RH 99 Tiles of Arm strong with wood work bracing & fix with power coated G.I frame work @ 600mm ( Six Hundred millimeter) c/c in combination with 150x12mm ( One hundred fifty into Twelve millimeter) thick RAI wood border as per pattern detail and specification complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

(i) 300x16mm ( Three Hundred into Sixteen Millimeter)

(ii) 250x16mm ( Two Hundred Fifty into Sixteen Millimeter)

Providing and fixing aluminium tower bolts, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

(i) 200x10mm ( Two Hundred into Ten Millimeter)

(ii) 150x10mm ( One Hundred Fifty into Ten Millimeter)

Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

(i) 125mm ( One Hundred Twenty Five Millimeter)

(ii) 100mm ( One Hundred Millimeter)

Providing and fixing 50 mm ( Fifty Millimeter) bright finished brass cup board or wardrobe knob of approved quality with necessary screws complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and Fixing 65x35mm ( Sixty Five into Thirty Five Millimeter) special quality bright finished CB locks with six leverse complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government.

Providing and fixing 250mm ( Two hundred Fifty Millimeter) aluminium eyes and hooks ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government.

Providing and fixing 25mm (twenty five millimetre) dia stainless steel curtain rod having well thickness of 1.25mm ( One Point Twenty Five Millimeter) with two stainless steel brackets fixed with C.P Brass screws and P.V.C sheeves etcetera wherever necessary complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government.

Providing and fixing bright finished brass ball catcher 10mm ( Ten Millimeter) dia complete as per directions and entire satisfaction of engineer in charge including carriage of material within all leads , lift and other incidentals . The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government.

Providing and laying 60mm (Sixty millimetres)thick NTC/UNISTONE/ATLANTIC as per approved design and shade heavy duty precasts cement concrete interlocking paver blocks vibro compacted upto M-50 ( M-Fifty) gradeincluding border or kurb block grey or coloured ever sub base of concrete with 25mm (Twenty five millimetres)thick average thickness of cement mortar 1:4(One cement isto four coarse sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of block including curing rubbing polishing completeas per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi , royality , malkhana , toll tax , sale tax , Gst and any taxes imposed by Government.

Providing and fixing 0.60mm ( Zero point Six Zero millimetre) thick prepainted steel sheet ( ISI Marked Z-120) of TATA/DURASHINE/SAIL/RELIANCE/JINDAL over steel trussed in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 ( Twenty ) microns over 5 ( five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( Six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing pre-painted steel sheet ridge ( Factory Made) having proper Gola shape of steel sheet and hips of TATA Durashine/ Sail / Reliance / Jindal 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved specifications, drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providig and Fixing pre-painted steel sheet valleys 90 c.m ( Ninety Centimeter) over all with 0.60mm ( Zero decimal six zero millimeter) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved specifications, drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata/sail with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete in all respect as per approved specifications, drawing and design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with bolts, nuts and washers etcetra having dome shape gratting which shall be of MS flat 25 X 5/6 mm SQ ( Twenty five into Five/Six Millimeter) / round bar and 6mm ( Six Millimeter) round bars in dome including making necessary connections with rain water pipe complete including carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL / Reliance / Jindal for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including of octroi, royality, Malkana, toll tax, sale tax, GSTand any other taxes imposed by the Government.

Structural steel work of Tata/Sail riveted, bolted/welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a primingr coat of approved steel primer all complete intrusses and trussed purlin, main and cross beam, hip and jack rafters, purlins connected to common rafter and the like in building complete as per approved drawing, design, specification and as directed by Engineer in charge including carraige of materials within all leads and lifts. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing M.S channels Frame75x40x4mm (Seventy five into forty millimeter into Four millimeter) with MS flat 75x4mm(Seventy five into four millimeters) in combination welded together and standard Z-section style of standard size with mesh bars of T-section 25x25x3mm (Twenty five into twenty five into three millimeters) and angle iron 25x20X3mm (Twenty five into twenty into three millimeters) and joints metered and welded and screws with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of Glass panes with glazing clips and special metal mesh putty of approved make complete including applying a priming coat of red lead paint complete up to any floor level as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of material with in all leads ,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Applying priming two or more coats with ready mixed paint brushing with white lead of Asian/Dulux/Nerolac make for priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt, dust and other foreign matter sand papering and knotting complete up to any floor level as per approved drawing, design,specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with rady mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping with ready mixed paint white of Asian/Dulux and Nerolac make complete up to any floor level as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GSTand any other taxes imposed by the Government.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface etcetera complete on steel work as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

6mm( Six millimetre) thick Cement plaster to ceiling with Cement mortar 1:3( One Cement isto three Sand) complete upto all floor level as per entire satisfaction and the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 40 mm (Forty millimetre) thick heavy duty precast cement concrete interlocking paver block of NTC/UNISTONE/ATLATICA with 23 cm (twenty three centimetre) diametre half round RCC pipe for drainage purpose laid over 10mm (Ten Millimetre) thick cement concrete 1:4:8 (one cement isto Four sand isto Eight graded crushed stone aggregate 40 mm (Forty millimetre) nominal size bedding/haunching for pipe complete as per approved drawing/design and specification and as per the direction of Engineer-in-charge including carraige of materials with in all leads, lifts and other incidentials.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Forming groove of uniform size 15 mm ( Fifeen Millimeter) wide and 15 mm ( Fifeen Millimeter) deep groove in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per the direction of Engineer-in-Charge including carriage of material with in all leads -,ifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

20 mm cement plaster in two coats backing coat 10mm ( Ten millimeter) and finishing coat 10mm (Ten Millimeter) thick on fair side of brick /stone masoney walls for interior plastering upto floor two level including aamses internal rounded angle chamfers and or rounded angle in cement mortor 1:4 ( One cement isto four sand )complete including carriage of materials in all leads, lift and other incidentials and as per drawing and technical specifications as per the direction of Engineer-in-charge.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying mechnically mixed and vibrated plain cement concrete 1:2:4 ( One cement isto two sand isto four graded crushed stone aggregate 40mm ( Forty Millimeter) nominal size and curing complete excluding the cost of form work in foundation and plinth in all depths including carriage of materials within all leads -,ifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimetrse) dia on wall face PVC De-plast Rain water pipe of (Finolex/Vectus/Relpipe ( Reliance)/Supreme of working pressure not less than 4 to 6 kg (four to six kilogram) per square centimetres of high density pipe conforming of IS code 4985-200 including filling the joints with approved adhesive complete and as per the direction of Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (one hundred fifty millimetre) PVC plain bend on wall face PVC De-plast (Phenolex/Vectus accessories for rain water pipes including filling the joints with approved adhesive complete up to any floor level and as per the direction of Engineer-in-Charge including carriage of material with in all leads,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (one hundred fifty millimetre) PVC shoe on wall face PVC De-plast (Phenolex/Vectus accessories for rain water pipes including filling the joints with approved adhesive complete up to any floor level and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Excavation in drain and channel etectera in earth work all kind of soil trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m ( One Point five meter) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( Twenty Centimeter) in depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus excavated soil as directed, within a lead of 50 m ( Fifty meter) complete and as per the direction of Engineer-in-Charge with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the ccompressive strength of 25N/mm2 (Twenty five Newton per square millimetre) cement concrete work of grade reinforcement concrete work , using cement contents not less than 360 kg (Three hundred sixty kilogram) per cubic metre for work. All works above plinth level upto floor V level to give a smooth surfaces including curing complete and pumping of concrete to site of laying including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without imposing strength and durability for reinforced concrete work above plinth level to all floor level as per approved drawing, design and as per the direction of the Engineer-in-charge including carriage of materials within all leads, lift and other incidentials. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75kg (Two point seven five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the cement surface complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and Laying 40mm(forty milimetre) thick cement concrete flooring 1:2:4 ( one cement isto two coarse sand isto four graded stone aggregated 20 mm(twenty milimetre) nominal size laid in one layer finished with floating coat of neat cement up to floor to all level complete as per HPPWD specifications,approved Drawing,design as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST or any other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm ( Five Hundred thirty into four hundred Ten Millimeter) with integral type foot rests with 100 mm ( One hundred millimeter) P.V.C P or S trap, 10 litre ( Ten Litre) low level P.V.C. flushing cistern,of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details and specification including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type)Star S No 20087 (S - 10 ) Size 57 X 35 X 39 cm ( Fifty Seven into Thirty Five into Thirty Nine Centimeter) with ISI marked white solid plastic seat and lid, 10 ( Ten) litre low level white P.V.C flushing cistern (sleek Plus) Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details / specification & C.P. flush bend with fittings & C.I. brackets, 40 mm ( Forty Millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china flat back Range of three half stall urinal Large flat back no 60002 of size 39 x 37.5 x 59 cm ( Thirty Nine into Thirty Seven point Five zero into fifty Nine Centimeter) with 10 ( Ten) litre white PVC automatic flushing cistern of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details and specification with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete as per the direction of Engineer-in-Charge including carriage of material within all leads ,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing viterious china wash basin delta no. 10010 of size 550x400mm ( Five Hundred fifty into Four hundred millimeter) with VLX pedestal of Hindware/ Cera/ Jaquar C.I. brackets, 15 mm( Fifteen Millimeter) C.P. brass pillar taps, 32 mm ( Thirty Two Millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back wash basin Garnet no 10080 size 580x 430 mm ( Five hundred Eighty into Four hundred Thirty Millimeter) ( Under counter Basin ) of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details/ specification with single 15 mm ( Fifteen Millimeter) C.P. brass pillar tap with C.I. brackets, 15 mm ( Fifteen Millimeter) C.P. brass pillar taps, 32 mm (Thirty Two Millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 550x 400 mm Five Hundred fifty into Four hundred millimeter) of Cera / Hindware / Jaquar with single 15 mm ( Fifteen Millimeter) C.P. brass pillar tap with C.I. brackets, 15 mm ( Fifteen Millimeter) C.P. brass pillar taps, 32 mm (Thirty Two Millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per approved drawing design, specification and as per the direction of Engineer-in-Charge including carriage of materials with in all leads ,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with ISI marked white solid plastic seat and lid, 10 (Ten) litre low level white flushing cistern Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details/ Specification & C.P. flush bend with fittings & C.I. brackets, 40 mm( Forty Millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 8 mm ( Eight Millimeter) dia C.P. / S.S. Jet of Continental series of Jaquar / Classik series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal with flexible tube upto 1 ( One) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Diamond / Unik Kitchen sink with drain board 510x1040 mm bowl depth 250 mm ( Two Hundred Fifty Millimeter) with C.I. brackets and stainless steel plug 40 mm ( Forty Millimeter) including painting of fittings and brackets, cutting and making good the walls wherever required as approved by Engineer - in - charge as per approved drawing, design, specification and direction by the Engineer-in-charge including carriage of material with in all leads ,lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink and wash basin with casted swinging spout at top of mixure hindware /cera /Jaquar make as per approved design, specification and as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 32 mm ( Thirty Two Millimeter) dia P.V.C.flexible waste pipe of Finolex , Relpipe (Reliance ) , Vectus for sink or wash basin including P.V.C. waste fittings complete as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal for gully floor or Nahni trap complete as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 600x450 mm ( Six Hundred into Four hundred Fifty Millimeter) beveled edge mirror of Continental series of Jaquar / contess plus series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6 mm ( Six Millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 600x120x5 mm ( Six Hundred into One Hundred Twenty into Five Millimeter) glass shelf Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( Forty Millimeter) long screws, rawl plugs complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass each toilet paper holder of Continental series of Jaquar / Classik plus series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and Fixing high pressure P.V.C spigot and socket soil, waste and vemulating Pipe of Supreme/ Finolex/ Vecturs/ Relpipe ( Reliance) working pressure ISI marked including fixing with approved adhesive etecetera complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GSTand any other taxes imposed by the Government.

(i) 110mm dia ( One Hundred Ten Millimeter)

(ii) 75mm dia ( Seventy Five Millimeter)

Providing and Fixing P.V.C collar of finolex/ Relpipe ( Reliance)/ vectus including fixing with approved etecetera complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

(i) 110mm dia ( One Hundred Ten Millimeter)

(ii) 75mm dia ( Seventy Five Millimeter)

Providing and Fixing PVC holder bats clamps of Finolex/Relpipe( Reliance) Vectus approved design to PVC pipe steel making good the walls steel etcetera complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

(i) 110mm dia ( One Hundred Ten Millimeter)

(ii) 75mm dia ( Seventy Five Millimeter)

Providing and fixing 110mm dia ( One Hundred Ten Millimeter) PVC bend of required degree with access door of Relpipe ( Reliance)/ vectus/Supreme/Finolex insertion rubber washer 3 mm ( Three Millimeter) thick, bolts and nuts complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 110mm dia ( One Hundred Ten Millimeter) PVC heel rest sanitary bend of vecturs/Relpipe ( Reliance)/ Supreme/Finolex complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 110mm dia ( One Hundred Ten Millimeter) PVC double equal junction of required degree with access door of Relpipe ( Reliance)/ vectus/Supreme/Finolex insertion rubber washer 3 mm ( Three Millimeter) thick, bolts and nuts complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 110 x 90 mm ( One Hundred Ten into Ninety Millimeter) nominal size/diameter P.V.C. floor trap ISI marked of Finolex , Relpipe (Reliance ) , Vectus, Supreme ISI marked Confirming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etc complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 110 x 75 mm ( One Hundred Ten into Seventy Five Millimeter) nominal size/diameter P.V.C. floor trap ISI marked of Finolex , Relpipe (Reliance ) , Vectus, Supreme ISI marked Confirming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetera complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass towel rail 600X20 mm ( Six Hundred into Twenty Millimeter) of Continental series of Jaquar / classik series of Hindware/ floral series of Cera / Vintage series of Kerovite & Hindon series of Jalcomplete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 1620 ( 20mm O.D) pipe of Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera with clamps at 1.00 ( One) metre spacing including concealed work, cutting chased and making good the well etcetera This includes testing of joints complete as per direction of the Engineer-in-charge as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 2025 ( 25mm O.D) pipe of Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera with clamps at 1.00 ( One) metre spacing including concealed work, cutting chased and making good the well etcetera .This includes testing of joints complete as per direction of the Engineer-incharge as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (One cement isto Four coarse sand) C.I. cover with frame (light duty) 455x610 mm ( Four Hundred Fifty Five into Six Hundred Ten Millimeter) internal dimensions, total weight of cover with frame to be not less than 38 kg ( Thirty Eight Kilogramme) {weight of cover 23 kg ( Twenty Three Kilogramme and weight of frame 15 kg ( Fifteen Kilogramme }, R.C.C. top slab with 1:1.5:3 mix {One cement isto One point Fine sand isto Three graded stone aggregate 20 mm ( Twenty Millimeter) nominal size}, foundation concrete 1:5:10 (One cement isto Five fine sand isto Ten graded stone aggregate 40 mm ( Forty Millimeter nominal size}, inside plastering 12 mm (Twelve Millimeter) thick with cement mortar 1:3 (One cement isto Three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm ( Four Hundred Fifty Five into Six Hundred Ten Millimeter )and 45 cm ( Forty Five Centimeter) deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete as per approved drawing, design, Specification and as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( Fifteen Millimeter ) Nominal bore C.P. brass bib cock tap of Continental series of Jaquar /Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jalf approved quality conforming to IS:8931 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( Fifteen Millimeter ) nominal bore C.P. brass pillar tab cock (concealed) of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintag series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( Fifteen Millimeter ) nominal bore C.P. brass stop cock (concealed) Continental series of Jaquar /Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( Fifteen Millimeter ) nominal bore C.P. brass angle valve of Continental series of Jaquar / classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jalfor basin mixer and geyser points of approved quality conforming to IS:8931 complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 100 mm ( One Hundred Millimeter) nominal dia C.P grating of Continental series of Jaquar / classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jalfor approved quality and colour complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing, laying and jointing 150 mm ( One Hundred Fifty Millimeter) diameter PVC pipe of Relpipe( Reliance)/Vecturs /Finolex for Sewerage including testing/filling of joints etcetera with approved adhesive complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 {One cement isto Five coarse sand isto Ten graded stone aggregate 40 mm ( Forty Millimeter) nominal size}PVC Pipes for sewerage including bed concrete as per standard design :150 mm ( One Hundred Fifty Millimeter) diameter PVC Pipe complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (One cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix {One cement isto One point five coarse sand (zone- III) isto Three graded stone aggregate 20 mm ( Twenty Millimeter) nominal size, foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm ( Forty Millimeter) nominal size), inside plastering 12 mm ( Twelve Millimeter) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20 mm ( Twenty Millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm ( Ninety into Eighty Centimeter) and 45 cm ( Forty Five Centimeter) deep including C.I. cover with frame (light duty) 455x610 mm ( Four Hundred Fifty Five into Six Hundred Ten Millimeter) internal dimensions, total weight of cover and frame to be not less than 38 kg ( Thirty Eight Kilogramme) {weight of cover 23 kg ( twenty Three Kilogramme and weight of frame 15 kg ( Fifteen Kilogramme} With Sewer bricks conforming to IS : 4885 complete as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( One cement isto Four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement isto One point five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( Twenty Millimeter) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm ( Forty Millimeter) nominal size), inside plastering 12 mm ( Twelve Millimeter) thick with cement mortar 1:3 (One cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 { One cement isto two coarse sand isto four graded stone aggregate 20 mm ( Twenty Millimeter) nominal size} finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm ( one hundred twenty into Ninety Centimeter) and 90 cm ( Ninety Centimeter) deep including C.I. cover with frame (medium duty) 500 mm ( Five hundred millimeter) internal diameter, total weight of cover and frame to be not less than 116 kg { One hundred sixteen kilogramme (weight of cover 58 kg ( Fifty Eight Kilogramme ) and weight of frame 58 kg ( Fifty Eight Kilogramme )}With Sewer bricks conforming to IS : 4885 complete as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Making soak pit 2.5 m ( Two point five meter) diameter 3.0 ( three) metre deep with 45 x 45 cm ( Forty five into forty five centimeter) dry brick honey comb shaft with bricks and PVC drain pipe 100 mm ( One hundred millimeter ) diameter, 1.8 m ( One point eight meter ) long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete as per approved drawing, design, specification and as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 75mm dia ( Seventy Five millimeter ) P.V.C.Cowl of Finolex , Relpipe (Reliance ) , Vectus cowl ISI marked Confirming toIS No-14735-99 including fixing with approved adhesive complete as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Supplying and fixing in cast iron rectangular cover with frame for man holes 455mmx610mm (Four hundred Fifty Five millimeter into Six Hundred Ten Millimeter) light duty weight not less than 23kg (Twenty Three kilogramme) complete including carriage of materials with in all leads and lifts and other incidentals as per drawings and technical specifications and as per the direction of Engineer-in-Charge including all incidentals.The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and Fixing 1.00 HP ( One horse power) water lifting pump ISI marked of Kirloskar/Cromption including accessories and making necessary connection as required at site for its functioning complete as per the direction of Engineer-in-Charge including all incidentals with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying in trenches, galvanised mild steel tubes 20mm ( Twenty Millimeter) dia complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and laying in trenches, galvanised mild steel tubes 20mm ( Twenty Millimeter) dia complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing and fixing 1000 ltrs capacity (One thousand literes) PVC water storage tank (Sintex make 4 layers of ISI-12701 marked GI inlet or and outlet connections 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC with locking arrangement including hoisting up to all heights above ground level as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Providing M.S foot rests including fixing in manholes with 20x20x10 cm ( Twenty into Twenty into Ten Centimeter) cement concrete blocks 1:3:6{( One cement isto three sand isto six graded stone aggregate 20mm ( Twenty Millimeter) nominal size}as per standard design with 20x20mm ( Twenty into Twenty Millimeter) Square bar complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST and any other taxes imposed by the Government.

Nishchal Mahajan