Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 LAccepted-AOC | L1 | Accepted-AOC Lowest |
Tender Value
₹1.2 L
EMD Value
₹2,900
Closing Date
19 Dec 2022, 4:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer Electronics Sub Division, Kannur-670 002
Construction of new building extension of existing building toilet block and library hall for AC Kannan Nair smaraka UP School, Melankot in Kanhangad Supply and installation of various electronic equipments.
2022_PWD_534562_2
eT-23/2022-23/AEE/ELE/KNR
Open Tender
Electrical and Maintenance Works
Item Wise
120 days
Kanhangad
Please refer Tender documents.
5 documents required · 5 mandatory
₹555
₹2,900
27 Mar 2023
13 Dec 2022
21 Dec 2022
14 Dec 2022
19 Dec 2022
14 Dec 2022
Supply and installation of Portable PA Amplifier system having the following minimum specifications: Power output : 250W RMS at 1% THD 200W RMS at 0.5% THD Inputs Channel : 3 × Mic 2.0mV/4.7kΩ, 1 × Aux 250mV/470kΩ, Line in: 1V/10kΩ, Frequency response : 35-20,000Hz ±3dB Tone controls : Bass ±5db at 100Hz and Treble ±5db at 10kHz Dimensions : W 325 x H485 X D255 mm (Preferred Model : Ahuja XPA-3010DP or any other brand having equivalent or better specification)
Supply and installation of unidirectional Dynamic Microphone Frequency Response 50-16,000Hz, Sensitivity 2mV/Pa, Impedance 300 ohm. With 3 pin XLR connector & 10 meter low noise shielded 2 core Mic cable. (Preferred model: Ahuja ASM-580XLR or any other leading Brand having mirror features).
Supply and installation of Dual UHF wireless microphone System with audio output 0-50mV, frequency response 50-15000Hz and receiver workable on 220-240v AC, Microphone workable on DC battery.( Preferred Studiomaster XR 40HH or any other leading Brand having equal or better specifications).
Supply and installation of PA Speaker Stand with height adjustment 3.5 - 605 feet, load capacity 40kg. (Preferred Model : Ahuja STA-150 or any other brand having equivalent or better specification)
Supply of good quality universal power distribution unit having Surge arrestor having 4 x 5A 5 pin plug sockets.
Supply of BAR CODE Printer having Resolution: 8 dots/mm 203 DPI , Printing Method:Thermal Transfer & Direct Thermal , Print Speed: Max. 152.4 mm 6”/second, Print width: Max. 108 mm 4.25“ ,Print Length: Max. 2,794 mm 110“ ,Lable roll capacity: 127 mm 5“ OD,Ribbon:300 m long, max. OD 67 m, 1” core ink coated outside , Ribbon Width: 40 mm to 110 mm 1.6” ~ 4.3” ,Processor: 32bit RISC CPU ,Memory:8 MB Flash memory, 16 MB SDRAM , Interface : USB 2.0 , Power:Input: AC 100240V, 2.5A, 5060Hz, Output: DC 24V, 2.5A, 60W Sensors: Transmissive gap sensor, Black mark reflective sensor position adjustable (Preferred Model : TVS LP 46 Lite or any other brand having equivalent or better specification)
Supply of BAR CODE Scanner havingProcessor type: ARM32-bit ,Operating Freq. :24.5 MHz (Internal) ,Sensor :Linear CCD Sensor ,Scan mode:Manual/Auto sense ,Alarm mode :Red light alarm, Buzzer alarm ,Scan rate:Smart detect up to 350 scans/second ,Resolution :3mil/0.1 mm@PCS90% Print contrast ratio : 20% ,Light level :Visible red light 632 nm LED ,Scan depth of field :6mil (0.127mm) 40~190mm;8mil (0.2mm) 35~210mm ;10mil (0.26mm) 30~300mm ;13mil(0.33mm) 30~350mm ; 20mil (0.5mm) 30~400mm , Interfaces: USB, RS 232, USBCOM Light source :40,000 hours, MTBF (Calculated):80,000 hours (Preferred Model : TVS BS- C- 103G or any other brand having equivalent or better specification)
Supply of Multifunction InkTank Photo Printer having Print Method: On-demand inkjet (Piezoelectric), Print Resolution: 5760 x 1440 dpi , Automatic Duplex Printing:No , Scanner Type: Flatbed colour image scanner , Sensor Type: CIS, Optical Resolution: 1200 X 2400 dpi . Connectivity : USB 2.0 (Preferred Model : EPSON L850 or any other brand having equivalent or better specification)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .