Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹56.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹58.8 L+₹2.3 L (3.99%)Rejected-Finance AMLA TOLA DISTT KATIHAR BIHAR 854105 | KATIHAR | BIHAR | 854105 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹70.0 L+₹13.5 L (23.8%)Rejected-Finance 57 7 MEGHNAD SAHA SARANI PRADHAN NAGAR SILIGURI 734 403 DIST DARJEELING | SILIGURI | DARJEELING | WEST BENGAL | 734403 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹74.0 L+₹17.4 L (30.9%)Rejected-Finance B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | L4 | Rejected-Finance Other than lowest bidder |
Tender Value
₹90 L
EMD Value
₹1.6 L
Closing Date
22 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bengdubi
Headquarters Commander Works Engineer Bengdubi Post-Bengdubi Distt-Darjleeling (WB) 734424
REPAIRS TO FOOTPATH, HARDSTANDING, DRAIN AND ROAD BERM AT SUKNA MIL STN UNDER GE SUKNA
2023_MES_623789_1
8196/S/E8
Open Tender
Civil Works
Item Rate
180 days
SUKNA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE Sukna
₹1.6 L
CWE Bengdubi
5 Feb 2024
18 Oct 2023
29 Nov 2023
18 Oct 2023
22 Nov 2023
9 Nov 2023
27 Oct 2023
Amount
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level), including removal of debris ouside the premises, Complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.0kg of cement per sq. metre. complete all as specified and directed.
M&L for cement concrete 1:2:4 type, B1 (using 20 mm graded crushed stone aggregates) as in copings, Chajja, kerbs, etc, including necessary formwork, weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.
M&L for precast Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggrgates ) set in CM 1:4 as in landing, cover slab (for manholes, chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work and demolition of existing reinforced cement concrete complete all as specified and as directed .
M&L for Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggrgates ) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition of existing reinforced cement concrete complete all as specified and as directed .
Use and waste of formwork to soffits of suspected slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizonal or slopping) for rough finished flat surfaces of concrete, complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed.
All as per item No 6 above but 6 to 8mm dia.
M&L for factory fabricated Hydraulically machine pressed prepolished cement concrete chequered tiles of size 300x300X25mm thick (with grey cement and pigment), set in neat cement slurry including provision of 15mm thick cement screed bedding layer in CM 1:4, tiles joints shall be grouted and immediately after grouting, the joints shall be pointed flush in separate process in CM 1:3 mixed with pigments to match the colour of the Tiles, complete all as specified and directed.
M&L for r providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including demolition, complete all as specified and as directed.
M & L for heavy duty full body vitrified paving tiles (coloured) 300mmx300mmx10 mm with pigment set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15mm thick screed bed in CM 1:4, complete all as specified and as directed.
M&L for coloured digital Ceramic heavy duty parking tiles 8 to10 mm thick (square / rectangular) of approved size, area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM 1:4, complete all as specified and as directed.
M&L for 75mm thick PCC type D2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub-base of of floors etc; finished fair & even/rough, complete all as specified and directed.
M&L for 100mm thick PCC type B-2, 1:2:4 (using 40mm graded crushed stone aggregate) as in hard standing etc, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 75mm thick PCC type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in hard standing etc, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed.
M&L for PCC type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation, filling & mass concrete, complete all as specified and directed.
M&L for providing Plain Cement Concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surfaces channel and drains including necessary form work, complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth using extra cement including forms moulds mitred/stopped ends etc, complete all as specified and as directed.
M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’, thickness of concrete slab 75 mm, complete all as specified and as directed.
Demolition of brick work or rubbled stone masonry including all quoins, arches , pillars etc built in cement mortar including disposing off the retrieved debris outside the premises, complete all as specified and as directed.
M&L for Brickwork with Sub class 'B' old size bricks of class designation 75 (i.e average compressive strength 75 Kg / cm2), straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site outside the premises, complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 on the surfaces of brick or concrete, finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for preparing new plastered surfaces of walls and applying three coats of white wash, complete all as specified and as directed.
Demolition and breaking up 450mm bore NP2 pipes, set in cement mortar, complete all as specified and directed. Note:- Excavation and Earth Work shall be measured and paid for separately.
Excavating in trenches n.exc. 1.50m wide and n.exc 1.50m in depth for foundation, laying of cable, pipe etc and getting out in soft/loose soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed
Removing excavated material to a distance not exc 50.00 mtr and depositng where directed at a level n.exc 1.5m above the stating point, complete all as specified and as directed.
M&L for 450 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates for 450 mm bore pipes as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed
Prahalad Rai
B.B. Enterprise
ABHISHEK ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .