Repair to floor, plaster, roof ceiling, joinery, sanitary fitting, painting, sewage line and path drain of JCOs/OR and MES key pers Accn at Talwar Line and OTM Accn of Mall Road and Young Road under AGE B/R-II of GE Dehradun.

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

All as per Ser item No1 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed.

M&L 30mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified in SSR Part I.

M&L 30mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified in SSR Part I.

S&F 35mm Flush shutters BWR, factory made solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified in SSR Part I.

M&L 35mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified in SSR Part I.

S&F 2nd class hard wood plain, solid, straight Chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together withglue pinned at joints, supplied & fixed complete all as specified and directed.

S&F mild steel flat iron for hold fasts and similar articles complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 as in hold fast blocks, etc complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification & drawing as shown in SSR part II complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing as shown in SSR part II, complete all as specified and as directed.

S&F Prelaminated particle board, 18/19mm thick, both sides with decorative choice lamination, exterior grade fixed with screws to timber frame work, fixed in repairs including second class hard wood plain, fillets, square, rectangular or triangular in section, wrought, secured with nailsor brads, cross sectional area exceeding 3 Sq.cm but not exceeding 6 Sqcm complete all as specified and as directed.

S&F Veneered particle board, 18/ 19mm thick interior grade,solid core, medium density general purposes type wilh commercial face veneers type 'BB' as in cup board shelves complete fixed in repairs including second class hard wood plain, fillets, square, rectangular or triangular in section, wrought, secured with nailsor brads, cross sectional area exceeding 3 Sq.cm but not exceeding 6 Sq.cm complete all as specified and as directed.

S&F in repairs factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.

S&F in repairs factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete without glazing bars, as fly proof shutters with one shop coat of primer complete all as specified and directed.

S&F factory made steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Repairing steel windows making functional (easy to opening and closing) and replacing the missing, damaged parts including necessary welding etc complete all as specified & directed. (Note : Part if any shall be paid separtely under respective item as supply only.

Supply only box type MS hinge complete all as specified.

Supply only MS handles complete all as specified.

Supply only peg stay complete all as specified.

Supply only sash bar complete all as specified.

M&L plain fillets 2nd class Hard wood exc 13 & n exc 25 Sqcm Square or rectangular in section, wrought secured with nails or barbs complete all as specified and directed.

S & F Framed work such as grills, gratings , Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe 290. Gde-E-165 complete all as specified and directed.

S&F butt hinges mild steel, medium weight 100 mm size with fixed complete all as specified and directed.

S&F butt hinges mild steel, medium weight 75 mm size with fixed complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts complete all as specified and directed by Engr-in-charge.

S&F 150 mm long, solid in one piece stainless steel barrel tower bolts complete all as specified and directed.

S&F 150mm size solid in one piece stainless steel handles, fixed with stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F 125mm size solid in one piece stainless steel handles, fixed with stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F 300mm long MS Helical door spring welded to steel frame or fixed to wooden door frame with screws including roller and roller plate etc complete all as specified and directed.

S&F in repair 300mm long MS Helical door spring to steel chowkhat with same as but fixed to wooden door frame including roller and roller plate etc complete of approved quality.

S&F Hasp and staple 100mm safety type, stainless steel 304 grade with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F floor door stopper of stainless steel double legged and tongue, 304 grade, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S & F Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed.

S&F stainless steel CP semi hydraulic albehari hinges all as sample approved by Engr-in-Charge

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed.

S&F in repair peg set of five stainless steel fixed on CP steel plate 304 grade including fixing screw as per approved sample.

M & L sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed by Engr-in-Charge.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing fixing new ones.

Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads all as specified and directed

S&F Stainless steel 304 grade wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and directed.

S&F in repairs Stainless steel 304 grade wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples with 8% nickle complete all as specified and directed.

M&L for Ist class hardwood beads, straight of size exc 6 sqcm but nexc 9 sqcm for fixing galvanised MS wire cloth, including mitres etc. all as directed by Engineer-in-charge.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends complete all as speccified and directed as per approved sample complete all as specified and directed.

Demolition of cement concrete ground floor and paving nexc 15cm thick (below or above ground level) and dispose with in the MD land 1.5km complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair without using extra cement.The plinth protection shall be laid in alternate bays nexe 2 sqm with 10mm wide joints filled with bitumen mastic comprising of 1 part of hot bitumen 85/25 grade and 3 parts sand all by weight complete all as specified.

M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) as in skirting cut from tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slury and pointed in white or coloured cement to match including screed bed 10mm thick in cm 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed..

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L 10 mm thick ceiling plaster in CM (1:4) on fair faces of concrete surfaces finished even and smooth without using extra cement including fixig of wire mesh to receive plaster where required complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement. WPC will be measured and paid separately complete all as specified and directed.

M & L rendering 15mm thick in patches n exc 3 Sqm in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement. WPC will be measured and paid separately complete all as specified and directed.

M & L rendering 10mm thick in patches n exc 3 Sqm in cement mortar 1:3 mixed with water proofing compound of cement finished fair faces of concrete surfaces, chajja/ facia even and fair without using extra cement. WPC will be measured and paid separately complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primerof approved tint complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer of approved shade on walls all as specified & directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed.

Providing & fixing tiled false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 15mm bore GI tubing complete all as specified and directed.

Refixing of old steel tubing and connections in new or old position with all fittings to floor, wall or ceiling as directed, for 20mm bore GI tubing complete all as specified and directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

S&F in repairs CP brass Angle Valve 15mm dia complete all as specified and directed. Make-Pearl/Essco/Jaquar.

S&F in repair CP brass shower rose 15mm dia , 100mm dia complete all as specified and directed.

S&F in repair 08 Litr Dual capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long bend for out let, fixing with WC complete all as specified and directed by Engr-in-charge

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm long complete all as specified and directed.

Dismantling water tank of exc 250 ltr and not exc 500 ltr Capacity complete all as specified and directed.

Dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity complete all as specified and directed.

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets, including Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.

S&F in repair pillar taps, brass, chromium plated high neck, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaguar/Cat part No. 5357N or equivalent of Hindware/ parryware.

S&F in repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with cast iron spun 600 mm long 'P' trap (SI 3989 1984), set in cement concrete type B-1 (1:2:4) complete (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-charge.

S&F in repair ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 15mm bore iron pipe and fixed ( minimum weight 20mm -210 gms) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Padestal pattern) white incl plastic water closet seat covers white closed pattern with flat bottom with mild steel chromium plated hinging device (except flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair CP toilet paper holder as approved by Engr-in-Charge.

S&F in repair PVC Jet spray for EWC with 1 mtr long PVC pipe complete fitting all as specified and approved as sample.

S&F in repairs fancy type 5.50mm thick looking mirror with PVC moulding 40mm wide all around with back 5mm thick PVC board of size 450x600x5mm thick as approved by Engr-in-Charge.

S&F in repair CP brass wall mixer with Telephonic shower, complete all as specified and direcated. Make- Jaquar Cat Part No CQT-CHR-23217 UPR or equivalent of Hindware/ Parryware.

S&F in repair cp Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed. Make : Jaquar Model No CON 281KN, HSN 1929 & OHS 1989/Marc ESS547A & ES 531 (Telephonic shower) ES 549 (Shower) ES (Shower).

S&F in repair CP brass Central hole basin mixer fancy type 15mm dia all as specified and directed. Make- Jaquar product code:50L-CHR-6167B or equivalent of Hindware/ Parryware.

S&F in repair CP brass bib tap fancy type short body 15mm bore screwed for iron pipe or for brass ferrule all as specified in SSR Part I . Make : Jaquar product code: EKO-CHR-33037 or equivalent of Hindware/ Parryware.

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make :- JAGUAR CAT Part No ALI-85037/Hindweare CAT Part No F-370004/Prayag CAT Part No S9906

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves (2 in 1), cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. Make :- JAGUAR Cat Part No FON-40053/Hindware Cat Part No F160017/Prayag Cat No 9410

S&F in repair PVC Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed and approved by Engr-in-Charge. Make :- JAGUAR CAT Part No-ALD CHR 565 or equivalent of Hindware/ Parryware..

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make : - Parryware Cat Part No T9985A1(Shower) & T-9999A1(Arm)/Hindware Cat Part No F160054 (Shower) & F190016(Arm)/Jaquar Cat Part No OHS 1999 (Shower) & SHA479L300 (Arm).

S&F in repair soap dish, brass, chromium plated,100X100 mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair PVC Shelves 450mm of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms)

S&F in repair plate rack 200mm and size 60 x 75 cm made out of 1.00 mm thick stainless steel complete all as specified and as directed.

S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Taking down CI/AC/PVC pipes incl fittings upto 110mm dia and removing from site complete all as specified and directed.

S&F 100mm dia centrifugally cast (spun) iron pipe in any length with ears, with cement joints laid in trenches or in floors as per IS-3989-1984 complete all as specified and directed.

Ditto but fixed to walls including necessary clamps.

S&F 75mm dia centrifugally cast (spun) iron pipe soil and waste pipe in any length with ears, with cement joints laid in trenches or in floors as per IS-3989-1984.

Ditto but fixed to walls including necessary clamps complete all as specified and directed.

S&F centrifugally cast (spun) iron bends with cement joint any radius for 100 pipe.mm dia with duck 's foot or heel rest complete all as specified and directed.

S&F centrifugally cast (spun) iron bends with cement joint any radius for 75 pipe.mm dia with duck 's foot or heel rest complete all as specified and directed.

S&F centrifugally cast (spun) iron pipe branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100mm bore dia complete , fixed in repairs complete all as specified and directed.

S&F 75mm centrifugally cast (spun) iron branch piece single equal spigot or socket type fitted with oval access doors complete all as specified and directed.

S&F centrifugally cast (spun) iron bend (any radius) of 100mm bore with oval access door complete all as specified and directed.

S&F centrifugally cast (spun) iron bend (any radius) of 75mm bore with oval access door complete all as specified and directed.

S&F 100 mm dia centrifugally cast (spun) iron cowls complete all as specified and directed.

S&F 75mm dia centrifugally cast (spun) iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B 1(1:2:4) complete all as specified and directed.

S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed.

S&F in repairs for 100mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) bends of75 mm dia, any radius complete all as specified and directed.

S&F PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

S&F PV C (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.

PVC (SWR) floor trap, plain with grating including jointed with solvent cement of 75 mm outlet dia complete all as specified and directed.

S&F in repairs PVC waste pipe not less than 60 cm long with PVC coupler for kitchen sink , WHB , Urinal etc complete all as specified and directed.

S&F 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repair stainless steel sink coupling with waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair CP steel Grating round with steel frame with hinge 100mm dia all as sample approved by Engr-in-charge.

Cutting around the pipe 75/100mm bore waste pipe/soil pipe including taking out plant roots up to any depth in brick masonary and rejointing in pipe joint in appoxy mortar (Asian/Berger) and making good to existing surface all as directed by Engr-in-charge. (After the jointing pipe one week to be open for checking of leaking including necessary scaffolding)

Removing of bushes/grass upto root level from the wall & roof upto tripple storey builing and repairing of disturbed surface with cement mortar with plaster and making good with existing surface of wall.

M&L 15mm thick cement plaster in cement motar 1:3 on concrete surface finished even and smooth with using extra cement with water proofing compound including taking down existing plaster from the roof including existing treatment complete all as specified and directed (water proofing compound will be paid separately)

M&L applying evenly a tack coat industrial bitumen 85/25 at the rate of 1.20 Kg per Sqm including cleaning of surface on roof all as directed by Engr-in-charge.

M&L one coat of aluminium bitumen paint @ 0.30 litres/Kg on the roof all as directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with core wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper all as directed by Engr-in-Charge.

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.

M&L preparation of old decorated surfaces of ceiling (Plastered) by brooming down or sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.

M&L one coat of white wash on prepared surface of wall complete all as specified and directed. White washing shall be carried out using DDL.

M&L one coat of white wash on prepared surface of ceiling complete all as specified and directed (white washing shall be carried out using DDL).

M&L one coat of oil bound distemper on prepared surface of in any tint on walls complete all as specified and directed by Engr-in-Charge

M&L two coat oil bound distemper over a coat of primer any tint on walls on prepared surface complete all as specified and directed by Engr-in-Charge.

M&L one coat of cement base paint on external prepared surface of wall complete all as specified in SSR Part I and directed by Egnr-in-Charge.

M&L two coat of cement base paint over a coat of suitable primer on external prepared surface of wall complete all as specified and directed Engr-in-Charge.

M&L for preparation of internal surface of wall and applying wall putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

M&L for preparation of wall and applying exterior grade wall care putty 2 to 3mm thick to make the surface smooth as specified and directed by Engr-in-Charge.

M&L one coat of whether proof exterior emulsion paint on brick/concrete wall surfaces plastered surface of walls all as specified and directed by Engr-in-Charge.

M&L two coat of whether proof exterior emulsion paint on brick/concrete wall surfaces incl primer coat on walls complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified and directed by En gr-in-Charge.

M&L for preparation of old painted surfaces of wood over 10 cm width/girth and applying one coat of synthetic enamel paint all as specified in SSR Part I and directed by Engr-in-charge.

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high Writing bldg No all as specified and directed by Engr-in-Charge.

S&F heavy duty thread type PVC water tank cover with fixing frame, fixed on PVC tank with 4 Nos of screws complete all as specified and directed by the Engr-in-Charge.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth for laying of Sewage line, manholes etc and getting out in any type of soil, etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick etc complete all as specified and directed.

Removing excavated material (soils) to a distance not exc 50m and depositing where directed etc complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforecd concrete) set in cement mortar 150 mm internal dia complete all as specified and directed.

M&L for 150 mm reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for providing cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) 100mm thick bed for 150mm bore pipes including packing under and haunching against the sides of pipes after they are laid tested, etc complete all as specified and directed.

Cutting into existing manholes for connecting new drain pipe 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

Cleaning of existing water storage tank with vaccum cleaner machine exc 250 to 1000 ltrs capacity with liquid bleach and dry with and apply on coat of anti bacterial spray and refil including cleaning float with five steps as per PS Clause. Date of cleaning to and CA No to be painted with synthetic enamel paint on water storage tank with stencil in black/white paint all as directed by Engr-in-charge. Note : Any damage to float valve/cover/GI pipe will be responsible and change/repair will be the contractors responsibility without any charge.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M&L for 65 mm thick vibromatic reinforced precast cement concrete 1:1:2 (using 20mm graded stone aggregate) with 2mm thick mild steel CR sheet around painted with 2 coats of bituminous paint , as in man hole cover slabs finish fair even and smooth without using extra cement ( Top surface will be chequred finish) including necessary form work, 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed by Engr-in-charge (Note : CA No and date will be engraved on covers. Reinforcement shall be measured and paid saperately. Curing will carried out with ponding method)

S&F TMT MS bar 8 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and dircted.

M&L Cleaning of existing sewage pipe lines 100mm/150/200mm internal dia at any depth inciuding manholes by removing the manhole covers of any type / size and cleaning by means of hydraulic jet pressure machine manually as requierd at site from manholes and well flushing with water after cleaning including getting out sludge if any and liquid materals from connecting manholes deposited in sewar line removing the solids and sludge to any distance and reinstating the manhole cover to its oiginal postion (cost of removal of sludge/liquid material from sewage lines and manholes in same line is incl. in rate of this item and rate quoted also includes for keeping particular sewage line which is undertaken once for cleaning, functional for full contract period) complete all as specified and dircted.

Removing the manholes covers and de-sluding /de-watering of septic tank and soakage well of any size and depth by mechanical pumping by plugging inlet as requried,and making the septic tank and soak well fully functional to the entire satisfaction of Engr -In- Charge including carrying the effluent out of MD land using 5000 ltr capacity sewage tanker and re-instating the manholes cover to its original postion complete all as spd and directed by Engr-In Charge

M&L cleaning the blockage of bathroom/ kitchen by cleaning the Nahani traps/gully traps of all the mud/sludge and getting out, washing thoroughly grating of tarp, CI waste pipes by opening the clearang eyes and deposting the sludge in a pit of suitable size at a distance not exceeding 50 meters form the gully trap and and covering the same with the soil obtained from excavation of pit including all excavations and earthwork complete all as spd and directede by Engr -in- Charge.

M&L Cleaning of blockage of WC indian or European type by removing of all the mud/ sludge and getting out including cleaning of SGSW or CI pipe upto First manhole and deposting the sludge in a pit of suitable size at a distance n' exc 50 meters from the wc and covering the same with the soil obtained from excavation of pit including all excavations and earth work complete all as spd and directed by Enge-In -Charge.

Cleaning of Man hole any depth any size taking out accumulated, soil , sludge any material incl both ends and removal to MD lands incl manhole cover removing & refixing all as directed by Engr-in-charge.

Notes. For cleaning of sewage system:- (a) Contractor's representative shall attend office of Engr-in-Charge on all working days at 0900 hrs to collect the complaints pertaining to blockage of traps, cleaning of sewage lines, manholes, septic tank and soak wells . In case contractor's representative fails to report Rs 450/- per day will be deducted from the contractor payment for the absent period. (b) complaint slips shall be deposited to the JE concerned after completion of job duly singed by the users. payment shall be made on the basis of complaint slips and site verification by JE/ Engr-in-Charge. (c) Contractor shall provide printed complaint register/ slip as per format given by Engr-in-Charge before commencement of work. (d) The work in foul conditions such as cleaning of soakwell, septic tanks, manholes etc shall be carried out with mechanical means where work with mechanical means is not practicable and work shall be executed manually with the permission of Engr-in-Charge.

Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete and making good the disturbed surfaces of walls, Floors, ceilings etc to match with existing all as specified and directed.

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs required for One light/fan point controlled by one switch , complete all as specified and directed.

All as per item No 177 but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No 177 but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 177 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, unsheated cable and including 4 Sqmm copper conductor cable (multistranded) PVC insulated FRLS and unsheated cable earth continity wire to common earth and connecting to earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC Case & Caping not less than 19 mm dia, clip, complete with all accessories such as socket, elbow, junction box, bell mouth, bend, reducer etc including pressed iron/steel suction box of thickness1.2mm for mounting of switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs required for One light/fan point controlled by one switch , complete all as specified and directed.

All as per item No 181 but point wiring for one 5 pin 5 Amp socket outlet point complete all as specified and directed.

All as per item No 181 but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 181 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, unsheated cable and including 4 Sqmm copper conductor cable (multistranded) PVC insulated FRLS and unsheated cable earth continity wire to common earth and connecting to earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

S&F bell push 5 Amps, single pole all as specified and directed.

S&F electric bell, AC 230V, single pole complete all as specified and as directed.

S&F switch piano flush type single pole, 5 Amps, one way all as per specified & directed.

S&F switch piano flush type single pole, 20 Amps, one way all as per specified & directed.

S&F socket outlet 6 Amps, 5 pin, 2 in 1 complete all as specified and directed

S&F socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified & directed

S&F switch socket combination 5 Amps, 5 pin, 2 in 1 complete all as specified and directed

S&F switch socket combination multipurpose 5 & 15 Amps, 5 pin, 2 in 1 complete all as specified and directed

M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core , drawing through exisitng conduit (without socket, elbow, junction box, bell mouth, bend, reducer and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs required for One light/fan point controlled by one switch , complete all as specified and directed. (Modular switches boxes and cover plates shall be measured and paid separately).

All as per item No 193 but point wiring for one 5 pin 5 Amp socket outlet point complete all as specified and directed.

All as per item No 193 but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 193 here in before but with 4 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, unsheated cable and including 4 Sqmm copper conductor cable (multistranded) PVC insulated FRLS and unsheated cable earth continity wire to common earth and connecting to earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

S & F Modular Fan Regulator electronic rotary,0-4 steps step type 100 Watt, 240 Volt 50 Hz hum free 2 module complete all as specified and directed.

S&F Supply and fixing switch modular 6 Amps 230 Volts one way switch complete all as specified and directed.

S&F Socket modular 6 Amps AC 230 Volts 2/3 pin combined 2 modular type complete all as specified and as directed

S&F Socket 6A/16 Amps-2/3 pin combined AC 230 Volts modular type complete all as specified and as directed.

S&F Switch modular type AC 230 volts 16 Amps one way complete all as specified & as directed.

S&F moduler bell push 6 Amp one module one way complete all as specified.

S&F GI sunken box with flush metal GI box 1 module suitable for modular switches incl plastering, making good disturbed surfaces of wall, painting to match the existing finishes complete all as directed.

All as per item no 203 here in above but 2 module.

All as per item no 203 here in above but 3 module.

All as per item no 203 here in above but 4 module.

All as per item no 203 here in above but 6 module.

S&F combind cover plate white 1 module suitable for modular switches complete all as specified and directed.

All as per item no 208 here in above but 2 module

All as per item no 208 here in above but 3 module

All as per item no 208 here in above but 4 module

All as per item no 208 here in above but 6 module

All as per item no 208 here in above but 8 module

S&F ceiling rose surface bakelite 3 terminals of size 65x25mm complete all as specified and directed

S&F step type, electronic fan regulator 120 watts, 5 step for ceiling fan 1200/1400 mm sweep 230 volts AC complete all as specified and directed

S&F lamp holder PVC/polycarbonate type with LED lamp 9/10 watt complete all as specified & directed

S&F in repairs energy saving Bulk head luminaire with opal diffuser with and including retrofit LED lamp 10 watts complete all as specified and directed by Engr-in-charge. Make : CG cat LBHP-10-CDL/Philips WT140W LED7S CW PSU S1 PC/Havells ENDURA RUGBYNEO N /Mepro cat no BCL 23 Plain

S&F in repairs mirror light decorative compact luminarious with decorative ends caps 9/10 Watt or higher LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make Philips BN 021 LED10S -6500 PSU GR S1 /Havells Cat No ENDURALINEARNEOBS10WLED840SPCWH /CG LCL-07-CDL

S&F in repairs surface mounted LED 600x600mm fitting made of CRCA powder coated finish with high transmitivity difusser, LED used shall be profi LED & flat diffuser type and capacity 32 wattage or higher wattage, CCT upto 6500K, CRI > 80, PF > 0.95 or higher side including driver minimum internal surge protection 2.5 KV complete all as specrified & directed Make : Philips cat part No SM365C LED32-6500 PSU OD WH/Wipro CRCO10R038HP57GL / Havells PLUTONEO2X2PLR34WLED857S/CG LSTP-45-CDL.

S&F in repairs TPN DB VTPN 4 way 415 Volts, 50 Hz indoor type double door Sheet metal enclosure IP-43 DB's flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable managenment including mounting arrangement for DPX3 MCCB 125 Amps four pole 415 volts as incomer including connection terminal strip complete pre wired with suitable size copper conductor. The DB's should hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Engr-in-charge, Make: Indoasian or eqvt in L&T/Schneider

S&F in repairs MCCB 3 Pole 125 Amp thermal magnetic complete all as specified and directed by Engr-in-charge, Make: Indoasian or eqvt in L&T/Schneider

S & F in repairs sheet metal enclosure TPN for DB's when MCB's to be used 4 way with 200 amps bus bar and double door complete all as specified and directed.

S & F in repairs sheet metal enclosure SPN for DB's when MCB's to be used 12 way with 200 amps bus bar and double doo rcomplete all as specified and directed.

All as per item no 223 here in above but DB 8 way

All as per item no 223 here in above but DB 4 way

S&F in replacement metal clad single pole and neutral enclosure with 2 pin and earth plug and socket complete with and including one single pole MCB 20 Amp 240Volt complete.

S&F MCB SPN 240 Volt 10 KA 6 to 40 Amp 'C' series conforming to IS complete all as specified & directed. Make: Legrand cat no 4086 18 or eqvt in L&T/ Schneider.

S&F MCB SP(single pole) 240 volt, 10 KA, 6-40 Amp, 'C' series confirming to IS complete all as specified and directed. Make: Legrandor 4085 96 eqvt in L&T/ Schneider.

M&L for submain wiring with 3 runs (P+N+Earth continuity conductor) of 2.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade recommended colour code ,drawn through and including Surface PVC conduit pipe of medium duty not less than 15 mm dia including necessary PVC conduit specials and connecting all wires with suitable size thimble complete all as specified and directed. Note:-3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

M&L for submain wiring with 3 runs (P+N+Earth continuity conductor) of 2.5 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including PVC case and caping of medium duty not less than 15 mm dia including necessary PVC specials and all wires connecting with suitable size thimble complete all as specified and directed. Note:-3 runs of 2.5 Sqmm size PVC copper cable, and one run of PVC case & caping shall be measured as one unit length.

All as per item No 230 here in above, but submain wiring with 3 runs of 4 Sq mm wire (P+N+Earth continuity conductor) . Note:-3 runs of 4 Sqmm size PVC copper cable, and one run of PVC Cas e& Caping shall be measured as one unit length.

All as per item No 230 here in above, but submain wiring with 3 runs (P+N+Earth continuity conductor) of 6 Sq mm Note:-3 runs of 6 Sqmm size PVC copper cable and one run of PVC PVC Case & Caping shall be measured as one unit length.

S&F tamper proof electronic single phasewith enclosure , whole currrent energy meter (LCD display) 10 Amp to 60 Amp, 240 volt class 1.00 and AC supply including cable connection, proper sealing with barcode with PVC seal. The meter shall comply with the latest version of IS-13779 with at least 2 anti tamper LED indications of line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type transparent meter box. The meter shall work satisfactory with guaranteed accuracy as per limit of IS: 13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old u/s meter will be deposited to E/M store yard)

S&F in repairs Meter Distribution Board made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shallbe embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04 Nos incuding fixing concealed on wall, electrical connection with excisting system and sealing properly complete all as specified and directed. Make Hensel cat part no Mi0800 / Secure/Sintex

S&F three core PVC insulated flexible and over all PVC round cable of size 40/0.0060 with multi stranded copper conductor complete all as specified and directed.

M&L for earthing complete with galvanized iron or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to galvanized iron strip 32x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68mm) 8 mesh per liner inch, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 40mm dia medium grade GI pipe and watering pipe shall be 20mm bore medium grade GI pipe, and including all excavation and earth work & connecting the earthing to an earthing test point /transformer nuetral/body/ Lt panel etc. and testing on completion, complete all as specified & directed by Engr-in-Charge.

S&F MCB TPN 63 Amps 10 kA, 430 Volt complete all as specified & directed by Engr-in-Charge.

S&F GI brackets for street light fitting made out of 40 mm dia,1.5 m long, medium grade pipe, bend to 120 degree angle shape, drilled holes etc &fixed with clamps, nuts, bolts etc, complete all as specified and as directed.

PAWAN KUMAR

SARASWATI CONSTRUCTION CO

M/S C S AITHANI

VERDHMAN ASSOCIATES

M/S P K ARORA

M/s Pradeep Kumar

AYUSH CONSTRUCTION COMPANY