Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 472 C 1 TOCOL MACHINE TOOLS PRIVATE LIMITED 13TH CROSS 4TH PHASE PEENYA INDUSTRIAL AREA BANGALORE KARNATAKA 560058 | BENGALURU URBAN | KARNATAKA | 560058 | Admitted-Finance |
| 2 | Admitted-Finance NOT APPICABLE NOT APPICABLE 12 A PEENYA INDUSTRIAL AREA BALGALORE 5600458 PEENYA INDUSTRIAL AREA BANGALORE KARNATAKA 560058 | BENGALURU URBAN | KARNATAKA | 560045 | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical AS PER RFP |
| 4 | Rejected-Technical | Rejected-Technical AS PER RFP |
| 5 | Rejected-Technical PLOT NO 195 QUAY STREET OPP NAGINA HOTEL DARUKHANA REAY ROAD EAST MUMBAI MAHARASHTRA 400010 | MUMBAI SUBURBAN | MAHARASHTRA | 400010 | Rejected-Technical AS PER RFP |
Tender Value
Refer Docs
Closing Date
21 Oct 2021, 10:30 amClosed
AGMCOM
INCOD OFFICE NAVAL DOCKYARD SBS MARG MUMBAI 400023
REPAIR/REFURBISHMENT OF COMPONENTS AND SUB-ASSEMBLIES OF 06 TURBO GENERATORS-INS VIKRAMADITYA
2021_NAVY_480053_1
DYT/GES/21-22/106A/PL-IN/ VKD-TURBO GENRATOR/326
Open Tender
Marine Services
Item Rate
150 days
NAVAL DOCKYARD MUMBAI
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
Exempted
NAVAL DOCKYARD MUMBAI
6 Dec 2021
6 Oct 2021
22 Oct 2021
6 Oct 2021
21 Oct 2021
13 Oct 2021
13 Oct 2021
Amount
Service - Repair and setting to work of Gland Steam regulator (a) Degutting/ Removal of the assembly from foundation (b) Disassemble the unit in full scope. (c) Remove differential piston along with stem. (d) Remove slide valve assembled with stem. (e) Carry out technical condition inspection of gland steam regulator and its parts by visual inspection, undertake dye penetrant test of problem sections. Carry out quality inspection checks of parts. (f) Check run out of stem assembled with slide valve. (g) Carry out replacement of parts view crumpling of accordions of bellows, cracks or leakages of welds, and deformation of spring. (h) Rough-grind places of contact of spherical surface of membrane and flat spring preserving the sphere. (j) Replace the stuffing of angle valves. (k) Check the Movement of piston and slide valve under its own weight should be smooth without seizures. (l) Carryout STW post assembly.
Service - Overhauling and setting to work of feed controller - 1. Uninstall feed controller from condenser. 2. Disassemble and check the parts for any mechanical damage. 3. Check and, if required, replace the diaphragm bundle and nozzles from SPTA. 4. Check the seals and joints for damage and leakage. 5. Check the backlash of drive elements of servo motor, regulating valve and spring. 6. Carry out setting to work on test rig.
Service- Inspection & Repair of Steam reducer. (a) Disassemble the steam reducer. (b) Carry out technical condition inspection of internal parts and cavity. (c) Check piston, piston rings, springs, seat, stem etc. for damage and replace defective parts/ components. (d) Assemble the reducer and carry out functional checks on board ship.
Servicer- Alignment Checks of Rotor & Gearbox. (a) Remove top casing of gear box assembly. (b) Decouple the gear box and turbine. (c) Fit the alignment tool and record alignment value in vertical and horizontal plane. (d) Post alignment checks, re-couple the turbine rotor and gearbox assembly. (e) Fit the top casing of gearbox and associated systems.
Service - Air Ejector Pipe removal and Welding of TG 1. (a) Carry out removal of ejector unit from foundation and shipping out to factory for repairs. (b) Pipe to be cut and removed from internal casing. (c) Welding/ renewal of pipe is to be undertaken post condition inspection. Dye penetrating test to be done on weld repair and the casing post fitment of pipe. (d) Pipe and casing to pressure tested hydraulically for any leakage.
Service - Renewal of both Turbine Bearings. (a) Both bearings to be renewed bedding in of new bearing with the shaft is to undertaken. (b) Undertake engineer’s blue test of bearings. (c) Post bedding in check and record the bearing clearances using lead wire.
Service- Repair/ Refurbishment of Steam Distributer. (a) Nozzles and valve seat to be repaired/ renewed, lapped and tested for leakages view found jammed and pitting and deposits observed on valve lid and seat. (b) Steel bellows to be replaced.
Service- Inspection & cleaning of Turbine rotor assembly. (a) Carry out Removal, mechanical cleaning of accessible area and Condition inspection of turbine rotor, guide blades, diaphragm assembly, sealing ring and steam shield fitted in bottom casing. (b) Insitu cleaning by mechanical means and preservation of Top & bottom casing. (c) Inspection of sealing rings and other stator assemblies to be undertaken. (d) Renewal of damaged/ deteriorated guide blades.
Service - Degutting/ Regutting, Lifting, Shifting and assembly of Turbine Rotors. (a) Carry out removal and refitment of Turbine rotor from/to ship (b) Decoupling from gearbox, rotor to be removed and shipped out for further in depth condition inspection at repair facility. (c) Welding of suitable load lifting arrangement on board along shipping/ unshipping route from 9th deck to deck 1 (d) Manufacturing of turbine stands and packing of turbine for safe shipment to suitable repair facility. (e) Assembling the Rotor back in the casing after repairs
Service - Cleaning and damage assessment of Turbine Rotors using NDE techniques and preservation of turbine rotor.
Service - Repair of Damaged Turbine Blades of TGs 1, 2 & 3. (a) Removal of existing damaged blades on 2 rows totalling 330 Nos of the Turbine Rotor . (b) Re-blading 330 Nos of Blades for 2 rows of TG Turbine rotor curtis wheel including shrouding. (c) Changing of seals. (d) Turning and Grinding the Rotor to maintain the required clearances as per the RTD
Service - Dynamic Balancing of TG rotors
Service - Removal and weld repairs on air ejector unit of TGs 2-6 followed by pressure testing and fitment onboard ship.
Service - Chemical cleaning of condenser
Service - Chemical Cleaning of Ejector condenser
Service - Chemical cleaning of Lub oil cooler
Service - Deputation of Service Engineer for HAT - 5 days / TG
Service - Deputation of Service Engineer for SAT - 15 days
Service - Defect rectification/ factory repair of starting oil pump post condition inspection.
Material - support pad
Materia- shB32:B198eild
Material - gasket
Materia-l valve seat
Material - Oil thrower as an assembly (baffle)
Material - sheild in two half
Material - support pad
Material - gasket
Material - valve D20 and D25 steel
Material - Ball link
Materia l- End-thrust bearing Bronze
Material- Bolt M16
Material - Stud M24
Material- Nut M16
Material Nut M24
Material- Cap nut
Material - Gasket Polytetrafluoroethyl ene Plate, grade 1 s 2.0 D 55
Material- Ball Н11-5 GOST 3722-81
Material - Ball Н4-5 GOST 3722-81
Material - Washer А.6.01.08Х18Н10Т GOST 11371-78
Material - Lock washer 6.08Х18Н10Т GOST 13463-77
Material - Lock washer 10.08Х18Н10Т GOST 13463-77
Material - Spring washer 665Г 029 GOST 6402-70
Material - Spring washer 8.5 65Г 029 GOST 6402-70
Material - Lock washer 16. 08Х18Н10Т GOST 13463-77
Material - spherical end thrust bearing in two half bronze
Material - Ball link steel
Material - Bolt M10
Material - Stud M12
Material - Stud M12
Material - Stud M14
Material - Stud M14
Material - Stud M16
Material - Stud M8
Material - Stud M8
Material - Screw M8
Material - Screw M6
Material - Screw M6
Material - Bearing
Material - Nut M8
Material - Nut M12
Material - Nut M14
Material - Nut M16
Material - Lock washer A.6.08Х18Н10Т GOST 13463-77
Material - Lock washer A.8.08Х18Н10Т GOST 13463-77
Material - Stud M10
Material- Stud M10
Material - Stud M10
Material - Bolt M10
Material - Bolt M10
Material - Bolt M8
Material - spaes Screw M8
Material - Nut M10
Material - Washer А.8.01. 08Х18Н10Т GOST 11371-78
Material - Washer А.10.01. 08Х18Н10Т GOST 11371-78
Material - Washer А.12.01. 08Х18Н10Т GOST 11371-78
Material - Lock washer 12. 08Х18Н10Т GOST 13465-77
Material - Lock washer 16. 08Х18Н10Т GOST 13463-77
Material - Spring washer 8 65Г 029 GOST 6402-70
Material - Membrane assembly
Material - Bolt M16
Material - Bolt M10
Material - Pin Bolt M8
Material - Bolt M20X70
Material - studs M20X70
Material - Nut M20
Material - stud M12
Material - Nut M12
Material - lock washer 10.08X18H10T
Material - Bolt M8
Material - Bolt M6
Material - Gasket D 189х153х4 01065-08-Б23
Material - Lock washer 12. 08Х18Н10Т GOST 13465-77
Material - Lock washer 20.08Х18Н10Т GOST 13465-77
Material - Lock washer 8.08Х18Н10Т GOST 13465-77
Material - Spring washer 5 65Г 029 GOST 6402-70
Material - Spring washer 6 65Г 029 GOST 6402-70
Material - Indicator
Material - Tail Piece
Material - Coupling of 2 Halves
Material - Lock Nut
Material - Bolt M12
Material - Bolt M10
Material - Stud M16
Material - Stud M16
Material - Stud M20
Material - Serrated Metal Washer
Material - Nut M12
Material - Nut M10
Material - Nut M16
Material - Nut M20
Material - Special Nut
Material - valve
Material - Galvanic-action protector
Material - Nozzle Segment
Material - Guide Blades & Steam Shield
Material - C1 Blading (160 Nos)
Material - C2 Blading (170 Nos)
Material - Gasket D 33х22х3 01066-22-Б18 SR6001D-01066-22-(B)18
Material - Gasket D 45х32х3 01066-24-Б18 SR6001D-01070-02-(B)63
Material - Ball D84 116-С-005 SR6001D-116-C-005
Material - Gasket 124-С-431 SR6001D-124-C-00431
Material - Gasket 124-С-518 SR6001D-124-C-00518
Material - Rear thrust pad (1 Set = 6 PCS) 188-С-0407
Material - Support plate 188-С-0408 SR6001D-188-C-0408
Material - spares Support plate 188-С-0409 SR6001D-188-C-0408
Material - spares Thrust pad (1 Set = 6 PCS) 188-С-0646 SR6001D-188-C-0646
Material - spares oil thrower as an assembly (Baffle)
Material - spares Gasket D 37х28х3
Material - spares Valve seat D 25/50
Material - spares Bushing SR6001D-112-C-01026
Material - spares Tie rod SR6001D-112-C-1130-07
Material - spares Axle SR6001D-118-М-063
Material - spares Lock washer SR6001D-181-M-02783
Material - spares Gasket Paronite ПОН-БТ s 1.0 GOST 481-80
Material - sparesGasket Paronite ПОН-БТ s 1.0 GOST 481-80
Material - Gasket Paronite ПОН-БТ s 1.0 GOST 481-80
Material - Lock washer 16.08Х18Н10Т
Material - Gasket D 34х25х1.5
Material - Gasket D 40х25х3
Material - Gasket D 37х28х3
Material - Gasket D 45х34х3
Material - Gasket D 33х22х2
Material - Gasket D 48х35х3
Material - Gasket Cardboard А s 0.3 GOST 9347-74 115х115 SR6001D-141-O-00356
Material - Cup 141-М-2769
Material - Ring 141-М-3322
Material - Gasket Paronite ПМБ-1 s 1.0 GOST 481-80
Material - Gasket ParoniteПМБ-1 s 1.0 GOST 481-80
Material - Gasket Paronite ПМБ-1 s 1.5 GOST 481-80
Material - Spring 185-М-148 SR6001D-185-M-00148
Material - Gasket D 45х34х3
Material - Axle 144-М-282 SR6001D-144-M-00282
Material - Gasket 144-М-618 SR6001D-144-M-00618
Material - Gasket 144-М-619
Material - Gasket 144-М-629 SR6001D-144-M-00629
Material - Gasket 144-М-630 SR6001D-144-M-00630
Material - Bushing 144-С-0550 SR6001D-144-C-0550
Material - Piston 144-С-0553 SR6001D-144-C-0553
Material - Flat spring 141-М-2432 SR6001D-141-M-02432
Material - 481-80 Gasket Paronite ПМБ-1 s 1.0 GOST
Material - Stop angle valve DN10 PN 6.4 MPa
Material - Stop angle valve DN10 PN 6.4 MPa
Material - Gasket D 30х21х2
Material - Gasket D 102х60х1.5
Material - Gasket D 70х44х1.5
Material - Gasket D 74х45х1.5
Material - Gasket D 84х57х1.5
Material - Gasket D 104х76х1.5
Material - Gasket D 75х61х1.5
Material - Key01870-27 SR6001D-01870-27
Material - Key 01870-32 SR6001D-01870-32
Material - Key 01870-41 SR6001D-01870-41
Material - Key 01870-43 SR6001D-01870-43
Material - Gasket 156-М-541 SR6001D-156-M-541
Material - Gasket 172-М-228-01 SR6001D-172-M-228-01
Material - Gasket 172-М-229 SR6001D-172-M-229
Material - Gasket 173-М-0525 SR6001D-173-M-0525
Material - Gasket 173-М-272-02 SR6001D-173-M-272-02
Material - Gasket 173-М-307 SR6001D-173-M-307
Material - Gasket 173-М-311 SR6001D-173-M-311
Material - Gasket 173-М-322 SR6001D-173-M-322
Material - Ring 141-М-3322 SR6001D-67582
Material - Ring 2-176,5-5,8-1136 SR6001D-67583
Material - Axle SR6001D-220-M-397-01
Material - Gasket 220-М-701 SR6001D-220-M-00701
Material - Driven gear 220-С-171-01 SR6001D-220-C-00171-01
Material - iving gear 220-С-172-01 SR6001D-220-C-00172-01
Material - Gasket 220-С-595 SR6001D-220-C-595
Material - Upper gasket 22-М-1123 SR6001D-22-M-1123
Material - Lower gasket 22-М-1124 SR6001D-22-M-1124
Material - Driving half-coupling 236-С-034-01 SR6001D-236-C-034-01
Material - sparesDriven half-coupling 236-С-036
Material - Driving half-coupling236-С-037
Material - Roller (SR6001D-4694164807) SR6001D-236-C-037
Material - Cup С4.203.100.550 SR6001D-C4-203-100-550
Material - Cup С4.203.200.032 SR6001D-C4-203-200-032
Material - Nozzle 155-М-409 SR6001D-155-M-409
Material - Gasket D 25х14х2.5
Material - Gasket D 23х15х2
Material - Gasket D 48х35х3
Material - Gasket Paronite ПОН-БТ s 1.0 GOST 481-80
Material - Blank cover (plug)
Material - Gasket SR6001D-155-M-545
Material - Gasket SR6001D-156-M-452
Material - Gasket Paronite ПОН-БТ s 2.0 GOST 481-80
Material - Gasket Paronite ПОН-БТ s 1.0 GOST 481-80
Material - Gasket Paronite ПОН-БТ s 2.0 GOST 481-80
Material - Gasket Paronite ПОН-БТ s 2.0 GOST 481-80
Material - Gasket Paronite ПОН-БТ s 2.0 GOST481-80
Material - Gasket Paronite ПОН-БТ s 2.0 GOST 481-80
Material - Gasket Rubber ИРП-2025 s 2.0
Material - Gasket Sail cloth No. 1 ПВ Code number 11102 grade 1 , 100 cm wide
Material - spares Gasket D40х31х3
Material - Gasket D 45х31х3
Material - Gasket D 50х40х3
Material - Gasket D 33х22х2
Material - Gasket D 28х17х2
Material - Galvanic-action protector SR6001D-155-M-361
Material - Blank cover SR6001D-155-M-545
Material - Gasket SR6001D-155-C-0792-01
Material - Gasket SR6001D-155-C-1835
Material - Gasket D40х31х3
Material - Gasket D 23х15х2
Material - Gasket D 19х10.5х1.5
Material - Piston SR6001D-154-(B)-00035
Material - Dog axleSR6001D-154-M-577
Material - Spring SR6001D-185-C-125
Material - Gasket D 25х14х2.5
Material - Washer SR6001D-110-M-1193
Material - Seal ring SR6001D-110-M-992
Material - Lock washer
Material - material spares Bushing SR6001D-110-M-925
Material - Blank cover (plug) SR6001D-110-C-00533
Material - Key SR6001D-182-M-480
Material - Key SR6001D-182-M-480
Material - Gasket Cardboard А s 0.3 GOST 9347-74
Material - Gasket Cardboard А s 0.3 GOST 9346-74
Material - GOST 481-80 Gasket Paronite ПМБ-1 s 1.0
Material - Gasket Paronite ПМБ-1 s 1.0 GOST 481-80
Material - Gasket Paronite ПМБ-1 s 1.0 GOST 481-80
Material - Gasket D 25х17х2
Material - Bearing SR6001D-4624120484
Material - Cap nut М16
Material - Stop angle valve DN10 PN 6.4 MPa
Material - Spring SR6001D-185-M-300
TRIVENI TURBINE LIMITED
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .