CWE KOTA/PLN-64OF 2019-20 REPAIR TO FLOORING PLASTERING FALSE CEILING AND CERTAIN B/R MISC WORK AT OTM UNDER AGE I PILANI

Amount

B/R ITEMS Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material complete all as specified directed.

Demolition of concrete of any description and in any positiion not otherwise specifically provided for, complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as directed.

Dismantling of ceiling boards (Fibre, Pulp, insulation) of any thickness complete all as specified and directed.

Dismantling boarding of any description, fixed any position with nails complete all as specified and directed.

Dismantling of aluminium section of any shape, size and thickness complete all as specified and directed.

Taking down shutter of any description not exc. 01 sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.

Dismantling of cement concrete tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster any description, on brick, PCC blocks or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises,complete all as specified and directed.

Demolition and breaking up drain pipe of 100mm dia (salt glazed stone ware, AC or reinforced concrete) set in cement mortar including PCC bedding and haunching etc complete all as specified and directed.

Dismantling of steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling of corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof covering, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Taking up or down PVC tubing and connections alongwith bib tap, stop cocks and other fittings including cleaning for refixing or removal complete all as specified and directed :-

15mm bore.

20mm bore.

25mm bore.

Rough excavation n.exc 1.5m deep and getting out in soft and loose soil, complete all as specified and directed.

Removing excavated surplus material (Soils) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply only integral water proofing compound ISI marked as approved complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate in any thickness shape and size as in pillar posts, boundry pillars complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 metre mean radius built in cement mortar (1:6), complete, all as specified & directed.

S&F 30 mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- S & F Glass/gauge shall be measured and paid for separately)

S & F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

S & F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed.

S&F 19mm thick block board grade-1 quality interior grade decorative veneer laminated on one face and fixed with 6mm thick teak wood beading/lipping fixed with screwed to timber frame complete all as specified and directed.

S & F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as applicable to item 08095 given in SSR Part – II (2010).

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed. Note : Glazing shall be measured and paid for seperately under respective item.

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) aluminium door shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated anodised aluminium snap beading, screws, powder coated aluminium fittings, such as handle (2 Nos for each leaf) etc complete all as specified and directed. Note :- Glazing/wire mesh shall be measured and paid separately under respective items of Schedule.

S & F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. Note :- Supply only Glass and other filling material in panels shall be measured and paid for sepparately. Fixing of Glass and other filling in panel deemed to be included in quoted rate of these items.

S&F 5.5mm thick, plain sheet glass ordinary quality fixed in alumininum door complete all as specified and directed.

S & F Factory made solid PVC moulded door shutter, 28 to 30 mm thick (style), with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face including particle board core, supplying and fixing in frame at site as all as per specifications and drawings as applicable to item 08101 given in SSR Part – II.

S & F 100 mm size butt hinges, medium weight, colled rolled mild steel & ISI marked complete all as specified and directed.

S & F in repairs CP hand shower (health Faucet) including holder and 1.00 mtr long flexible pipe complete all as specified and directed. Make:- JAGUAR Code. ALD-573 or equivalent/ make as specified in Appendix 'D'.

S & F Jet Spray with 1.0 mtr PVC tube (Stainless Steel) complete all as specified and directed. Make :- JAQUAR Code. ALE-547 or equivalent/ make as specified in Appendix 'D'.

S & F 150mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed.

S & F in repairs 150mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed.

S & F 200mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed.

S & F in repairs 200mm long aluminium anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed.

S & F 100mm size extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S & F 150mm size extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F mild steel work in tubular trusses, purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts including rivets or nuts and bolts, providing and fixing cleats, fish plates, gusset plates etc and also for wedging, plumbing, turning up & fixing complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

M & L for 25 mm thick PCC 1:2:4 type B-1, using 12.5 mm graded stone aggregate as in floor, surfaces finished even and fair complete all as specified and directed.

M & L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes complete all as specified and directed.

M&L 10mm thick rendering in cement mortar 1:4 to fair faces of brick masonry surfaces finished fair & even for fixing tiles etc complete all as specified and directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 , type C-1 using 20 mm graded stone aggregate as in plinth protection, path etc including construction of joints at every 3m interval in each corner and provition of mastic filling, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick surfaces or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5mm thick in CM 1:3 on fair faces of brick surfaces or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering in CM 1:4 on brick or concrete surfaces mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed. (Note :- Supply only WPC shall be measured and paid separately)

M&L 600 X 300 X 7mm thick glazed ceramic coloured tiles as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured white or cement to match the shade of tiles complete all as specified and directed.

M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the dark shade of tile complete all as specified and directed.

M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the dark shade of tile complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of priming paint complete all as specified and directed.

M & L for preparing newly plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M & L for preparing newly surfaces of ceiling and applying two coats of oil bound distemper over a coat of priming complete all as specified and directed.

M&L preparation of old painted wooden surfaces of any description and applying one coat of synthetic enamel complete all as specified and directed.

M&L preparation of newly wooden surfaces of any description and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparing old plastered or unplastered decorated surfaces of ceiling and applying one coat of distemper oil emulsion of any tint complete all as specified and directed.

M & L for preparing old plastered surfaces of walls and applying one coat of distemper oil emulsion of any tint complete all as specified and directed.

M & L for preparation old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and directed.

M & L for preparation newly painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and directed.

S & F 4mm thick plain sheet glass, ordinaty quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and as directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and as directed.

S & F 3 layer PP-R Polypropylene random copolymer pipes 15mm bore SDR 7.4 & SDR 11 UV stablised and microbial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S & F 3 layer PP-R Polypropylene random copolymer pipes 20mm bore SDR 7.4 & SDR 11 UV stablised and microbial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S & F 3 layer PP-R Polypropylene random copolymer pipes 25mm bore SDR 7.4 & SDR 11 UV stablised and microbial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

S & F repairs 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with crutch handle with or without lettered ‘Hot ‘ or ‘cold’ with long screwed shank and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repairs bib taps 15mm bore cast copper alloy chromium plated, fancy type, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15mm dia two way long body bib cocks with wall flanges, complete all as specified and directed. Make:- JAQUAR Code. MQT 512A or equivalent/ make specified in Appendix 'D'.

S & F in repairs 15 mm bore angle stop valve one way cast copper alloy chromium plated, fancy type screwed down high pressure long shank and cup with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15 mm bore two way angle stop valve one way cast copper alloy chromium plated, fancy type screwed down high pressure long shank and cup concealed type or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. Make:- JAQUAR Code. DLX-526A or equivalent / make specified in Appendix 'D'.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F 110mm bore PVC bend of any radius complete all as specified and directed,

S&F cast iron floor trap in 100mm dia with stainless steel grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S & F in repairs plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repairs 32 mm dia plastic waste pipe for sink wash basin etc flexible and expandable length complete all as specified and directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550 x 440 mm cutting for and pinning in ends of bracket complete all as specified and directed

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580mm x 440mm white with 'P' or 'S' trap front or back inlet and foot rest (any pattern) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., (excluding flushing cistern and flush pipe etc) and including making good to floor as existing complete all as specified and directed.

S & F in repairs white Vitreous china wash down water closet pan (pedestal pattern) with and including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, white with inlet, ball valve, handle including bracket etc complete all as specified and directed.

S&F in repairs 32mm dia waste coupling, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange and bedded in red lead cement and other complete all as specified and directed.

S & F in repair corner shelf (with bracket) complete all as specified and directed. Make:- JAQAUR of Car Part No. ACN 1173 or equivalent / make specified in Appendix 'D'.

S & F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make:- JAQUAR of Car Part No. CON-273KNUPR or equivalent / make specified in Appendix 'D'.

S & F in repairs CP central basin mixer with U shaped round casted spout with 450mm long baried houses and fixed complete all as specified and directed. Make:- JAQUAR of Car Part No. CON-167KNB or equivalent/ make specified in Appendix 'D'.

S & F overhead shower with 125mm dia with shower arm 15mmx240mm long casted, fixed to 15mm bore pipe or union including taking down old unserviceable one, complete all as specified and as directed. Make:- JAQUAR - Code. EOS-536A or equivalent and shower arm JAQUAR Code. EOS-542A or equivalent / make specified in Appendix 'D'.

M & L for anodised aluminium snap grid frame work for false ceiling of grid size 605x605mm with and including provision of 4mm thick E-board classic of make Everest or equivalent fixed to grid including necessary notching preparing holes and supporting hanger comprising of J hooks soffit cleat holding clip, level clip etc as per manufacturer instructions complete all as specified and directed.

M/s Raghuraj Singh Tejveer Singh

M/s Prem Associates