Providing 1 No. 10 Passenger Elevator in Deputy Commissioner office building at Mandi Distt. Mandi

LIFT (G+3) Supply, installation, testing and commissioning of 10 Passenger Machine room less . The rates include the cost of minor civil works and steel items required for installation of lifts complete in all respect to the entire satisfaction of engineer-in charge.

10 Passenger 680 Kgs, 1 Mps (min.) lift having 4 stop and 4 opening all on same side, Machine room less, having approximate travel 12 meters approx. as per detailed technical specifications given below.

Type & Capacity 10 Passenger 680 Kgs.

Speed 1.00 Meter Per Second (Minimum)

Type of Drive A.C.V.3.F. - Microprocessor based control/VF regenerative.

Motor / Machine Electric traction gearless motor to be hoisted on guide rails within the elevator hoist way.

Travel Approximate 12 Meters

Serving 4 stops, 4 openings (All on same side )

Hoist way Available 2100 mm wide x 1700 mm deep.

Car size 1300 mm W x 1350 mm D x 2200mm

Car Enclosure Constructed out of scratch resistant stainless steel Honeycomb finish/Moonrock finish panels.

Car & hoist way Door Constructed out of scratch resistant stainless steel Honeycomb finish/Moonrock finish panels.

Car entrance & Hoist way entrance Center opening doors with provision of emergency key opening at all landings.

DOOR Opening 800mm W X 2000mm H

Door Operation Automatic D.C. Power/ A.C.V.3.F. Door operation with adjustable door opening & closing timing.

Control Simplex, full collective control with or without attendants.

Operation A.C. variable voltage variable frequency.

Power Supply 415Volts + 10%, 3Phase ,50 Hz AC.

Over Head available 4500 mm

Flooring PVC flooring / space of 20mm for Flooring by owner

PIT available 1600 mm Deep

Leveling Accuracy +/-5mm Independent of load in the car.

Indicator Digital Direction and position indicators in both car and at all landings.

Guide Rails Tongue & Groove Guide Rails

Maintenance Free Maintenance / Fortnightly Service for one year

Safety & Buffers. As per I.S.I. Provisions.

Fire Safety The Landing door shall be fire rated for 2 hours as per IS.

Signal/ Accessories Press & Speak intercom system among cars & reception. Luminous hall Braille buttons at all landing and inside the car.

Steel items.

Automatic Rescue Device to automatically bring the Elevators to a landing in case of power or controller failure provided with sealed maintenance free Batteries of suitable rating for 7 operations of ARD in a day with duration of 30 min. The batteries shall be of reputed make (Exide / Amaron / Panasonic).

Load weighing Device with over load by pass feature.

Voice announcement system with music in the car to announce the position of the elevator as the car stops at a floor served by the elevator.

Full height infra red Safety curtain.

Fireman Drive.

Stainless steel panels in false ceiling

LCD/LED/Digital display in car/ Braille button/ PWD friendly.

Car operating Panel with door open/close button.

LED Lighting

Alarm & Emergency light .(Concealed) with re-chargeable battery

Over load Device.

Fireman Switch.

Air fan at Ceiling for air ventilation (16”sweep).

Audio signal in case of emergency stop/ any interruption should be provided in the lift car.

Correction drive

Hall lantern and gong at all landings

Phase failure detection.

Voltage stabilizer for control system.

Additional car gate lock to prevent the car door to be opened hand rail on three side of car from inside the car in case the car is not at floor level.

Installation & Commissioning The job includes installations, testing, commissioning as required to complete the work in all respect including cost of all material , T &P, Carriage & Labour etc.

Civil Work The firm shall provide scaffolding, M.S. joint /Channels, Pit ladders and minor Civil works etc. as required at no extra payment.

The complete lifts including testing, commissioning and safety provisions shall conform to various Indian standard and rules with up-to-date amendments as mentioned below”-

Standard & Rules. 1. IS 17900 (Part 1 to 5 )

Laying and Jointing PVC Pipe. HeadingIndian Electricity Rule 1956/ Indian Electricity Act 2003

HP Lift Act 2007/HP Lift Rule 2009

General technical specifications As per CPWD specification and relevant IS code.

Make-OEM fulfilling the eligibility criteria as specified in CPWD for lift work

SH: II AMC OF LIFT

Providing AMC for lift under item No.1&2. Under the AMC the supplier shall provide comprehensive Mtc. service of the lift including the spares and there shall be no hidden cost. Preventive Mtc. service of the equipment under AMC must be carried out once in fortnight. During the period of AMC service/repair calls are to be attended by the supplier within two hours from the time of such calls. The defective equipment should be repaired on the same day at purchaser’s location. In case of major defects requiring the defective card/item/ equipment to be taken to the supplier workshop. It should be returned within a week’s time duly repaired and immediate substitute card/item/equipment will be provided by the supplier for the smooth operation of the lifts. The to and fro transportation of the card/item/equipment will be the responsibility of the supplier. Delays in attending the calls and or repairing the defective equipment beyond time limit of one day will attract penalty @ Rs.500/- per day. The bidder will undertake the supplies of necessary Mtc. equipment and spare parts will be made available for all the equipment and the complete system for a period of 5 years on continuing basis with 1st year defect liabiliy period on free of cost and thereafter for four years on paid basis. The bidder shall quote the rates on per year basis.

For lift 1 (G+3)

For 1st Year

For 2nd year

For 3rd year

For 4th year

For 5th year