Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC GAIRKATA ROAD POST BINNAGURI PIN 735 203 DIST JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹30.2 L+₹60,853.65 (2.05%)Rejected-Finance DEPOPARA PO BINNAGURI PS BANARHAT DIST JALPAIGURI WEST BENGAL PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹31.8 L+₹2.2 L (7.27%)Rejected-Finance BIRPARA LANKA ROAD PO BIRPARA DISTT JALPAIGURI PIN 735204 | BIRPARA | JALPAIGURI | WEST BENGAL | 735204 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹31.8 L+₹2.2 L (7.43%)Rejected-Finance PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹32.1 L+₹2.5 L (8.37%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
16 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
SPL REAPAIR TO BLDG NO P-12 AND PROVN OF SEWAGE LINE OF BLDG NO P-25 AT BINNAGURI MIL STATION UNDER GE(S) BINNAGURI
2023_MES_596596_1
8577/E8
Open Tender
Civil Works
Works
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹86,000
Yes
28 Jul 2023
19 May 2023
19 Jun 2023
19 May 2023
16 Jun 2023
9 Jun 2023
Amount
Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable complete all as specified and as directed.
ditto all as per item No 1 above but beyond 1.5m or part thereof in depth beyond the first 1.50m
Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site.
Taking down chowkats or frames n. exc 1.5 Sqm (without taking off shutter from the frames) and removal from site.
Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each.
Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises.
Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.
Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc
Demolition of brick walling built in cement mortar etc complete all as specified.
Demolition of cement concrete of any position and description.
Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 900m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.
Demolition of reinforced cement concrete in any description and in any position (reinforcement cut as required to facilitate demolition).
M& L vetrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles exceeding 0.42 sqm but n.exc 1.0 sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match complete over 15mm thick screed bed in CM(1:6) all as specifierd and as directed.
All as per item no 15 above but as in skirting 10 cm height.
M&L for glazed coloured ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge.
All as per item no 15 but as in skirting 10 cm height.
M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in two panel etc complete all as specified and as directed.
M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes.
M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, manhole, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, Copping, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
M & L PCC (1:2:4) type B1 (20mm graded aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed. (Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule 'A').
M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20 mm graded stone aggregate) for chujjas.
Disconnecting existing tanks of capacity exc 250 Ltrs and n. exc 500 Ltrs, setting aside (or lowering if required) for repairs with all necessary fitting as required , cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints.
S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 4mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as specified and directed.
S&F of factory made soild FRP (fibre reinforced polymer) doors frame of size 50mmx47mm (specifications as per approved manufacturer) complete all as specified & directed.
S&F 30mm thick (style thickness) factory made solid panel FRP door shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame, (fixing of doors shall be as per manufacturers instructions ) (etc Complete all as specified and directed.
S & F in repair factory made UPVC white colour fixed glazed window/ ventilator made of (small series) frame 47x 50 mm mullion 47x68 mm both having wall thickness 1.9 +/- 0.2mm and single glazed bead appropriate dimention(Area upto 0.75 sqm) comprising of UPVC multi chambered frame and mullion (where ever required0 extruded profiles duly reinforced with 1.60 +/- 0.2mm thick galvanized mild steel section made from rolled forming process of required length (shape and size according to UPVC) profile), UPVC extruded glazing beads of appropriate dimentions, EPDM gasket, GI fastners 100x8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profiles of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded incl drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled weather froof silicon sealant over backer rod of required size and approved quality, all complete as per approved drawing & directions of Engr-in-Charge(Glass shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerence in dimentions i.e. in depth & width of profile shall be acceptable. Variation in profile dimention in higher side shall be accepted but no extra payment on this account shall be made.
S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for Fly ash brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.
M&L for fly ash brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair.
M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only).
Supply only integral water proofing compound.
M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement.
M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and including applying 2 coats of cement based wall putty 1 mm each to wall surface complete all as specified and directed. NOTE :- (i) Surface where Wall care putty to be provided shall be cleaned by vacuum suction system to remove all the dust. (ii) Wall care putty shall be mixed in multipurpose mixer machine. Putty shall be applied with Putty Sprayer. (iii) Distemper shall be applied with Auto Roller, which consists of pump attached to the roller head and ensures a uniform feed of paint to the roller and also ensure any spillage on the floor and windows as in the case of a conventional painting methodology. Roller in coats comprises of vertical strokes upward and downward which together constitute one coat. A uniformly finished surface without patches, roller marks etc shall be obtained. (iv) The work shall be carried out through authorized applicator of the manufacturer. Contractor shall submit details of applicator for approval of GE prior to execution.
M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and including applying 2 coat of cement based wall care putty 1 mm each including complete removal of existing treatment all as specified and directed. NOTE :- (i) Old surfaces already provided with distemper / other finish shall be removed completely by washing even to the last trace and allowed to dry completely. It shall then be prepared by Vacuum Based Sanding machine to obtain as even and smooth surface.. (ii) Wall care putty shall be mixed in multipurpose mixer machine. Putty shall be applied with Putty Sprayer. (iii) Distemper shall be applied with Auto Roller, which consists of pump attached to the roller head and ensures as uniform feed of paint to the roller and also ensure any spillage on the floor and windows as in the case of a conventional painting methodology. Roller in coats comprises of vertical strokes upward and downward which together constitute one coat. A uniformly finished surface without patches, roller marks etc shall be obtained. (iv) The work shall be carried out through authorized applicator of the manufacturer. Contractor shall submit details of applicator for approval of GE prior to execution.
M & for water proofing treatment to sunken floor with the following course of treatment/ specification: - (i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation . Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalant approved brand. Make of PU paint - Dek guard PUor equivalant approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade (1:3:6) type C-2 (using 40 mm graded stone agreegate) complete all as directed by Engr-in-Charge.
M & L for preparing new Plastered surfaces of walls and finishing the walls with two coats of Acrylic emulsion paint (exterior), premium quality of required shade over and including one priming coat of exterior primer complete all as specified and directed.
M & L for complete removal of existing treatment and finishing the walls with Acrylic smooth exterior paint of required shade. (Two or more coats applied @1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm) complete all as specified and directed. 1. Work shall be carried out as per manufacturer's instruction. 2 Priming coat and finishing shall be done through authorized applicator for approval of GE prior to execution.
M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth.
Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth
Material and labour for applying one coat of synthetic enamel paint on old painted steel and iron surfaces of any description over 10 cm in width or girth including necessary preparation of surfaces.
Material and labour for preparation of old plastered ceiling surfaces by brooming down or steel wire brushing: scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as directed by the Engr-in-Charge.
M&L for applying three coat of white washing including preparation of new or previously untreated surface of ceiling.
Form work to chajjas and like finished rough complete all as spd and as directed.
M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips.
M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip.
M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties etc including one coat of red oxide paint.
Application of waterproofing Coating :Providing and applying Fosroc Brushbond Roof Guard, a single component High build fibre Reinforced Acrylic Waterproofing render for roofing system to be applied by brush, at three coats at a minimum dry film thickness of 1mm, which should cure by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. Solid Content : 70 % Tensile strength ASTM D 412 : 1.10 Mpa Elongation ASTM D12 : 100% Resistance to ageing due to : 1000 hours UV radiation ASTM D4587 E : No Change Rapid Chloride Penetration ASTM C 1202-03 : Very low Pull off adhesion ASTM D4541 : 0.92 Mpa Resistance to Algae growth ASTM D 5589-97 : Passes, Zero rating Permeability (mm) (BSEN 12390 part 8) : 5.0 Water vapour transmission (ASTM E96) : 6.0g/m² h (Note:Application of waterproof tcoating will be done by authorised applicator using materials of approvrd make)
M&L 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) mixed with water proofing compound and laid on RCC slab as base layer for roof treatment roughening the top surface of concrete by using broom sticks while the concrete is green complete all as specified and as directed.(NOTE : water proofing compound paid separately under relevant item of this Schedule 'A').
M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) with using water proofing compound @0.2 ltr per bag of cement weight over existing roof surfaces for applying single component acrylic polymer modified, water proof coating finished even and smooth without using extra cement complete all as specified and as directed. (NOTE Acrylic polymer modified water proof coating and WPC will be measured and paid separately under relevant item of this Schedule 'A').
Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed of following bore:- (a) Bore tubing 15mm
(b) Bore tubing 20mm
M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following. (a) Bore tubing 15mm
(b) Bore tubing 20mm
All as per item No 56 (a) here-in-above but fixing only.
Al as per item No 57 (b) here-in-above but fixing only
S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Sleek of Hindware, Slimline of Parryware or equivalent of Cera)
S&F in repair Vitreous china wash down water closet pan (pedesatal pattern) (EWC) white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs.
S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.
Supply and fix in repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe.
S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length.
S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm.
S&F in repair 15 mm bore two way bib cock CP with flage complete all as specified and direcrted. (Make : ESSCO/Marc/Cera).
S&F in repairs bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair.
S&F in repairs angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified and directed.
S&F in repair central hole basin mixer for WHB complete all as specified and directed.
S&F in repair Harrison rails, mild steel, chromium plated with fixing ornamental brackets, stops, rollers etc. complete as specified and as directed.
S&F for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge.
S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed by Engr-in-Charge (Bore of pipe 110mm)
S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door.
S&F 110mm dia PVC SWR vent cowl
M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 75 mm) as in repair
M&L in repairs for CI floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 75 mm) as in repair
M&L for 150 mm size aluminium anodised cast type handles.
S&F of 200mm long aluminium anodised,barrel tower bolt of extruded section.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.
S& F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
S&F 100mm size mild steel butt hinges medium weight.
M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel.
M&L for precast RCC 1: 1.5 :3 type B-1 using 20mm graded aggregate set in cement mortar 1:4 as in manhole covers including necessary formwork complete all as specified and as directed
S&F for PVC (SWR) (Bore of pipe 150mm) pipes with working pressure 6 kg/cm2 single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed by Engr-in-Charge.
M&L PCC 1:3:6 type C-2 (40mm graded aggregate) as in foundations, filling and mass concrete
M&L for 15 mm thick plastering in cement mortar 1:3 on fair faces of brick or concrete surface finished even & smooth without using extra cement
M&L PCC 1:3:6 type C-2 concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested dia of pipe 150mm
S & F of Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles
M&L cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished & reforming benching as required dia of pipe 150mm
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps.
(b) One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.
(c) One socket out let 5/6 amps point on the independent board
(d) One socket out let 5/6 amps point on the same board
(e) One bell point controlled by one way switch 5/6 amps.
(f) One light point controlled by two way switch 5/6 amps.
All as per item No 94 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed
S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.
S&F of Modular switch, single pole, Two way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.
S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.
S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.
S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.
S&F of Modular bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.
S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200 mm sweep energy saving fans,ISI marked complete all as specified and directed.
S & F Call bell Ding dong, 230 Volt single phase all as specified and directed.
S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
S&F IP 20, class I, LED light 1X20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.
S&F of Bulk head luminaire suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminaire efficiency not less than 120 lumens/watts with and including 10 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified.
S&F of Decorative wall light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified. Make - Havells , CAT No - LHFOECE1TZ1B014 or equivalent to Crompton/Surya/Philips.
S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting all as directed by Engineer-in-Charge.
Taking down carefully Ceiling fan/ exhaust fan from its original position and refixing / hanging after B/R plaster work complete all as specified and directed.
M&L painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, all as specified and as directed.
Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm+ 1 x 6.0 sq.mm as earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles
S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB"S/lsolators with and including taking down old one complete all as specified and directed. Make : Legrand/ Hager/ABB/C&S.
S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.
S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed. Make :L & T ,Cat No: BB40630C,& Eqv to Legrand/ Hager/ABB/C&S.
S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.
S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed.
M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified and as directed.
Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, includig necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on completion all as directed and as specified.
S & F non-metallic rigid PVC medium grade 20mm dia conduit and conduit accessories (ISI Marked) concealed in wall incl cutting chases etc all as specified and as directed.
Taking out old unserviceable cable of any size carefully from trenches ofter disconnecting electric connection, GI pipe protection, with and including separating serviceable bricks & set aside and removing un-serviceable bricks from site complete all as specified and as directed. Note : The Excavation and earth work shall be mesured and paid separately under relevant item of Schedule.
Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 50 sqmm 3.5 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/KEI / POLYCAB/RR Kable/Gloster cable) (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').
Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.
Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.
M&L for 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed. Make: Tata/Jindal/Bansal Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
M/S MOHAN KUMAR BANSAL
S.N. GHOSH AND CO.
L. B. SHARMA
samrat saw mill and joinery workshop
M/S MAJUMDER CONSTRUCTION
R K AGARWAL
M/s. MD IRSHAD
SHRI PRADEEP PARIK
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .