COMPREHENSIVE MISC REPAIR TO OTM AND MD ACCN OF FAD IN A A BANAR UNDER GE BANAR

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 15mm thick rendering in CM 1:6 on wall for stone masonry surfaces finished even and smooth without using extra cement complete all as specified.

M&L for two coats of oil bound distemper on newly plastered walls over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth plastered and other surfaces including preparation of surfaces complete all as specified.

M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper over a one coat of 1mm thick JK/Birla wall putty on olf surface to prepare the surface even and smooth complete all as specified.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified.

M&L for 10 mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified.

M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified.

Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry/concrete surfaces/roof projections/chajjas upto the height 7 Mtr fair rendering is to be finished even and smooth without using extra cement complete all as specified. Note:- WPC shall be measured and paid separately.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends etc upto the height 7 Mtr complete all as specified. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified.

M&L for two coats of cement base paint on old plastered/pointed surfaces of walls including necessary preparation of surfaces complete all as specified.

Raking out joints/pointing to squarred rubble masonry, coursed or uncoursed built in cement mortar complete all as specified.

M&L for keyed pointing to stone masonry surface in CM 1:4 complete all as specified.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for square rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.

All as per item No 18.00 above but except stone.

Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20 mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (including not backing), removing rubbish off the premises complete all as specified.

M&L for coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing from site complete all as specified.

M&L for 25mm thick PCC 1:2:4, Type B-0 using 12.50mm graded aggregates as in base concrete to floor finish complete all as specified.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified.

All as per item No 25 above but as in skirting incl 10mm thick rendering in CM 1:4 complete all as specified.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified.

M&L 18/20mm thick any shade marble (Green marble) slab in cooking platform/partion and the like, set in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade over & including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L 20 mm thick Red Granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including moulding (U type) on edges in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L for 20-25mm thick machine cut kota stone flooring over and including 20mm thick screed bed CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified.

M&L machine cut Kota stone 20-25 mm thick in riser of steps, skirting dado and pillar laid over 10 mm thick screed in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror face) as approved complete all as specified.

Taking down chowkats or frames with shutters (w/o taking off shutters) n exc 1.5 sqm each complete all as specified.

Taking down shutters of any description exc 1.0 Sqm but not exceeding 2.0 Sqm complete all as specified.

Taking down shutter and refixing the shutter in same opening after making necessary repair to shutter of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified.

Resecuring or easing & adjusting without taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each complete all as specified.

S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc complete all as specified.

M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm complete all as specified.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified.

M&L Factory made solid panel of PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for 100mm long, medium weight, Mild Steel butt hinges fixed with doors complete all as specified.

S&F Aluminum tower bolts of extruded section of size 150mm complete all as specified.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised handles complete all as specified.

Taking up or down steel tubing and connection including cleaning for refixing of bore 15mm complete all as specified.

Taking up or down steel tubing and connection including cleaning for refixing of bore 20 mm complete all as specified.

Taking up or down steel tubing and connection including cleaning for refixing of bore 40 mm complete all as specified.

Refixing old steel tubing and connections in new or old position as in walls, ceiling, floors etc bore of pipe 15mm complete all as specified.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 20 mm complete all as specified.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 40 mm complete all as specified.

S&F 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.

S&F 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.

S&F 40mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.

S&F in repair 40mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified.

Supply and fixing in repair 15mm dia stop valves, screwed down high pressure, screwed both ends for iron pipe or for unions and fixed for 15mm bore but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified.

S&F in repair 15mm dia Stop valves, fancy type, chromium plated screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified.

S&F in repair CP 15mm dia bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

Supply and fixing in repair brass chromium plated shower rose 125mm size complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified.

Supply and fixing in repair 10 ltr PVC valve less, symphonic action type dual type flushing, low level, white, with inlet ball valve, float and handle including 600mm long PVC connection and brackets complete all as specified.

Supply and fixing in repairs vitreous china squatting pan, Órrisa Patern' size 580mmx440mm white with integral foot rests, embedded and set in PCC 1:5:10 type E2 (using 40mm stone aggregate) and making good to dismantled floor including removing rubbish complete all as specified.

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm waste cuppling complete all as specified.

S&F for Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

Supply and fixing in repair Stainless steel kitchen plate rack 1.0mm thick of size 750 x 600 x 250mm complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms) complete all as specified.

S&F in repairs brass chroumium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified.

S&F in repair 20mm dia Harrison rails, chromium plated with fixing brackets, stops, rollers (two nos of brackets/knobs/corners for one length/each opening) etc complete all as specified.

Supply and fixing 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified.

Supply and fixing 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified.

Demolition of reinforced cement Concrete in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, roof projection in D/S bldgs and similar suspended work complete all as specified.

M&L cement concrete type B-1, nominal mix (20mm graded aggregate) for chajja, roof projection in D/S bldgs, fins facia, stair case, landing, balcony & the like etc complete all as specified.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent shape required, including welding to existing reinforcement cranking bending, hooking etc and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified.

All item as per Ser No 73.00 above but 6 to 8mm dia complete all as specified.

M&L formwork to fins, louvers, fascia, chajjas, roof projection in D/S bldgs, stair case fair finished surfaces complete all as specified.

Removing of existing filling in sunken floor of WC and repair to sunken floor with 15mm thick plastering in CM 1:3 of internal surface mixed with WPC, than painting with bitumen 30/40 over a coat of bitumen primer, putting 50 micron polythene than filling with PCC 1:5:10 type E-2 using 40mm graded stone aggregate and inserting 50mm bore 1.00M long GI water tubing to the wall complete all as specified. Note : WC and tiles shall be measured and paid separately.

Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and removing debries out of MD land complete all as specified.

M&L 50 mm thick PCC (1:3:6) type C2 (by using 40mm aggregate) in plinth protection complete all as specified.

M & L Stone Slab 25 mm to 35 mm thick dressed true and square in one length not less than 60 cm and n exc 120 cm in copings, window cills, chajjas, sunshades, plinth protections etc, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directd, set, jointed and pointed in cement mortar 1:4 complete all as specified.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified.

M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified.

Dismantling boarding, any description, fixed in any position with screws and complete removal of old connecting snap grid and hangers complete all as specified.

S & F anodised aluminium snap grid frame work for ceiling 605 x 605 mm using aluminium anodised main tee of size 36.5 x 24 x 1.4mm, Cross Tee of size 23.50 x 26.40 x 1.40mm and angle of size 40 x 25 x 2mm including cutting, drilling, jointing etc. Complete including provision of 3.15mm dia GI wire suspenders fixed with adjustable connectors complete all as specified.

Providing and fixing gypsum board 10-12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified.

M&L for 1mm thick wall care putty on ceiling surfaces to prepare the surface even and smooth complete all as specified.

M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh, including frame work with GI wire netting and framing complete all as specified.

M&L for applying two coats of distemper oil emulsion in ceiling, white or tinted complete all as specified.

Hacking out old broken glass (any thickness size quality or description from metal frame including punching or drilling our old glazing/springs clips complete all as specified.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified.

S&F in repair stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified.

Bhawani Enterprises (BID ID -3405407)

DIWAKAR CONSTRUCTION CO. (BID ID -3413523)