Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹90 L
Closing Date
6 Nov 2025, 9:30 pmClosed
Karnataka Industrial Areas Development Board
Assistant Executive Engineer Ele
08022265383
Part-A- (a) Construction of SC transmission line using Single side/double side cross arm Monopoles from existing 400/220kV Vasanthanarasapura PGCIL sub-station to Entry point of Vasanthanarasapura Industrial Area (Proposed 220kV CTT location). (b) Construction of SC transmission line using Single side/double side cross arm Monopoles from existing 220/66kV Vasanthanarasapura KPTCL sub-station to Entry point of Vasanthanarasapura Industrial Area (Proposed 220kV CTT location). Part-B- Running of 220kV DC 1200sqmm XLPE Copper UG cable from 220kV DC CTT Location (Entry point of Vasanthanarasapura Industrial Area) to the proposed 220/66/11kV GIS/AIS sub-station at Chennai-Bengaluru Industrial Corridor (CBIC) for a distance of 1.890 kms. Part-C- Construction of 220kV & 66kV Terminal Bays at existing 220/66/11kV Vasanthanarasapura KIADB sub-station under Self execution basis by KIADB on Total Turnkey Basis
KIADB/2025-26/TL/WORK_INDENT347
KIADB/2025-26/TL/WORK_INDENT347
Open
Transmission Line
Two Tender Document System(Two Cover)
KIADB Head Office Bangalore
3 documents required · 3 mandatory
To qualify for award of this contract, each Tenderer in his name should have in the last five years period 2020-21 to 2024-25. The Tenderer should have satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar nature such as Construction and Commissioning of 220kV Transmission line (Over Head plus UG Cable) work of value not less than Rs.45.00 Crores within last five financial years
To qualify for award of this contract, each Tenderer in his name should have in the last five years period 2020-21 to 2024-25. The tenderer should have completed minimum route length 4.16Km 220kV Over head transmission line
To qualify for award of this contract, each Tenderer in his name should have in the last five years period 2020-21 to 2024-25. The tenderer should have completed minimum route length 3.04 Km 220kV 1Cx1000 sqmm UG Cable & above
Executed in any one financial year, the following minimum quantities of work on Total Turnkey Basis (80% quantity of work put to tender): Certificates of proof shall be enclosed from competent Authority not below the rank of Executive Engineer in Government/Public Sectors/ Government Undertaking Organizations (1) Construction of 220kV overhead transmission line using Monopoles - Route Length: 4.20 Km (2) Supply, laying, commissioning of 220kV 1Cx1000sqmm UG Cable & above - Route length: 3.04 Km
Each Tenderer should further demonstrate: Availability by owning at least 50% of the required / specified critical equipment for this work and remaining 50% can be deployed on lease / hire basis the key and critical equipment for this work
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity: (A x N x 1.5 - B), Where, A: Maximum value of Substation/Electrical engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N: Number of years prescribed for completion of the works for which tenders are invited. B: Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 12 months
To qualify for award of this contract, each Tenderer in his name should have in the last five years period 2020-21 to 2024-25. Achieved in at least two financial years a minimum financial turnover of Rs.180.00 Crores. (From Electrical Contract Works Only)
Each Tenderer should further demonstrate: liquid assets and /or availability of credit facilities of not less than Rs.27.00 Crores (Credit lines/ letter of credit/ certificates from banks for permitting the fund requirement etc - equivalent of the estimated cash flow for the months in the peak construction period)
₹7,500
₹90 L
5 Oct 2025
5 Oct 2025
7 Nov 2025
13 Oct 2025
13 Oct 2025
Construction of SC transmission line using Single side/double side cross arm Monopoles from existing 400/220kV Vasanthanarasapura PGCIL sub-station to Entry point of Vasanthanarasapura Industrial Area (Proposed 220kV CTT location). (b) Construction of SC transmission line using Single side/double side cross arm Monopoles from existing 220/66kV Vasanthanarasapura KPTCL sub-station to Entry point of Vasanthanarasapura Industrial Area (Proposed 220kV CTT location)
Part-A- Supply Portion- Monopoles - Fabrication, Proto testing and supply of Galvanised 220kV DC & MC Monopoles including cross arms, base plates with anchor bolts, anticlimbing device, step bolts and...
A-2- Lattice Towers- (I)Fabrication and Supply of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- Tower type MDplus0 Normal (a) HT Steel with all lead and lifts etc. complete...
A-2- Lattice Towers- (I)Fabrication and Supply of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- Tower type MDplus0 Normal (b)MS Steel with all lead and lifts etc. complete ...
A-2- Lattice Towers- (I)Fabrication and Supply of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- Tower type MDplus0 Normal (c)Auxiliary Cross arm (i)HT Steel with all lead a...
A-2- Lattice Towers- (I)Fabrication and Supply of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- Tower type MDplus0 Normal (c)Auxiliary Cross arm (ii)MS Steel with all lead ...
A-2- Lattice Towers- (I)Fabrication and Supply of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- Tower type MDplus0 Normal (c) Auxiliary Cross arm (iii)Stub & Cleat (HT stee...
A-2- Lattice Towers- (II)Fabrication and Supply of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers-(i)Tower type 'DDplus0' Normal (a) HT Steel with all lead and lifts etc. co...
A-2- Lattice Towers- (II)Fabrication and Supply of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers-(i)Tower type 'DDplus0' Normal (b) MS Steel with all lead and lifts etc. co...
A-2- Lattice Towers- (II)Fabrication and Supply of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers-(i)Tower type 'DDplus0' Normal (c) Auxiliary Cross arm (i) HT Steel with al...
A-2- Lattice Towers- (II)Fabrication and Supply of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers-(i)Tower type 'DDplus0' Normal (c) Auxiliary Cross arm (ii) HT Steel with a...
A-2- Lattice Towers- (II)Fabrication and Supply of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers-(i)Tower type 'DDplus0' Normal (d) Stub & Cleat (HT steel) with all lead an...
A-2- Lattice Towers- (III) Fabrication and Supply of galvanised 66kV DC NBT (KPTCL design tower) Transmission Line Towers- (i) Tower type 'DDplus0' Normal (a) MS Steel with all lead and lifts etc. com...
A-2- Lattice Towers- (III) Fabrication and Supply of galvanised 66kV DC NBT (KPTCL design tower) Transmission Line Towers- (i) Tower type 'DDplus0' Normal (b) Auxiliary Cross arm (i)MS Steel with all...
A-2- Lattice Towers- (III) Fabrication and Supply of galvanised 66kV DC NBT (KPTCL design tower) Transmission Line Towers- (i) Tower type 'DDplus0' Normal (c) Stub & Cleat (MS steel) with all lead an...
A-2- Lattice Towers- (IV) Fabrication and Supply of galvanised 66kV DC Single side cross arm NBT (HSR design tower) Transmission Line Towers- (i) Tower type DDplus0 Normal (a) HT Steel with all lead a...
A-2- Lattice Towers- (IV) Fabrication and Supply of galvanised 66kV DC Single side cross arm NBT (HSR design tower) Transmission Line Towers- (i) Tower type DDplus0 Normal (b) MS Steel with all lead ...
A-2- Lattice Towers- (IV) Fabrication and Supply of galvanised 66kV DC Single side cross arm NBT (HSR design tower) Transmission Line Towers- (i) Tower type DDplus0 Normal (c) Stub & Cleat (HT steel) ...
A-3-Supply of Galvanised Bolts & Nuts for tower parts, extensions and stubs (I) B&N for 220/220kV MC NBT (VKTP design tower) (i) Tower type MDplus0 Normal with all lead and lifts etc. complete as per ...
A-3-Supply of Galvanised Bolts & Nuts for tower parts, extensions and stubs (I) B&N for 220/220kV MC NBT (VKTP design tower) (i) Auxiliary Cross arm Normal with all lead and lifts etc. complete as per...
A-3-Supply of Galvanised Bolts & Nuts for tower parts, extensions and stubs (II) B&N for 220kV DC NBT (Hoody-HAL design tower) (i) Tower type 'DDplus0' Normal with all lead and lifts etc. complete as ...
A-3-Supply of Galvanised Bolts & Nuts for tower parts, extensions and stubs (II) B&N for 220kV DC NBT (Hoody-HAL design tower) (ii)Auxiliary Cross arm with all lead and lifts etc. complete as per spec...
A-3-Supply of Galvanised Bolts & Nuts for tower parts, extensions and stubs (III) B&N for 66kV DC NBT (KPTCL design tower) (i)Tower type 'DDplus0' Normal with all lead and lifts etc. complete as per ...
A-3-Supply of Galvanised Bolts & Nuts for tower parts, extensions and stubs (III) B&N for 66kV DC NBT (KPTCL design tower) (ii)Auxiliary Cross arm with all lead and lifts etc. complete as per specifi...
A-3-Supply of Galvanised Bolts & Nuts for tower parts, extensions and stubs (IV) B&N for 66kV DC Single side cross arm NBT (HSR design tower) (i)Tower type 'DDplus0' Normal with all lead and lifts e...
A-4- Tower Accessories- Number Plates 1 No. per tower) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A-4- Tower Accessories- Danger Plates (1 No. per tower) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A-4- Tower Accessories- Circuit Plates (1 No. per circuit) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A-4- Tower Accessories- Phase Plates (Set of 6 Nos.) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A-4- Tower Accessories- Earth Bonds (a) 450mm long with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A-4- Tower Accessories- Supplying and fixing of barbed wire as per specifications with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A5- Conductor, Insulators & Hardwares- AAAC Moose conductor with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A5- Conductor, Insulators & Hardwares- Drake ACSR conductor with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A5- Conductor, Insulators & Hardwares-220kV, 120kN Tension type Silicon rubber composite insulator equivalent to 1X16nos. of 120kN Disc - 2175mm with all lead and lifts etc. complete as per specifica...
A5- Conductor, Insulators & Hardwares-220kV, 120kN Suspension type Silicon rubber composite insulator equivalent to 1X14nos. of 120kN Disc - 2030mm
For Pilot Insulator with all lead and lifts etc. co...
A5- Conductor, Insulators & Hardwares-66kV, 90kN Tension type Silicon rubber composite insulator equivalent to 1X5nos. of 90kN Disc - 725mm with all lead and lifts etc. complete as per specifications...
A5- Conductor, Insulators & Hardwares-66kV, 90kN Suspension type Silicon rubber composite insulator equivalent to 1X4nos. of 90kN Disc - 625mm with all lead and lifts etc. complete as per specificati...
A5- Conductor, Insulators & Hardwares-Double Suspension clamp with hardwares & arcing horns suitable for 1X16 units of 120KN insulators to suit AAAC Moose conductor with all lead and lifts etc....
A5- Conductor, Insulators & Hardwares-Double Tension clamp with hardwares & arcing horns suitable for 1X16 units of 120KN insulators to suit AAAC Moose conductor with all lead and lifts etc. com...
A5- Conductor, Insulators & Hardwares-Double Suspension clamp with hardwares & arcing horns suitable for 1X4 units of 90KN insulators to suit Drake ACSR conductor with all lead and lifts etc. com...
A5- Conductor, Insulators & Hardwares-Double Tension clamp with hardwares & arcing horns suitable for 1X5 units of 90KN insulators to suit Drake ACSR conductor with all lead and lifts etc. complet...
A5- Conductor, Insulators & Hardwares-Mid span compression Joints suitable for AAAC Moose Conductor with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A5- Conductor, Insulators & Hardwares-Repair sleeves suitable for AAAC Moose Conductor with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A5- Conductor, Insulators & Hardwares-Vibration Dampers for AAAC Moose Conductor with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A5- Conductor, Insulators & Hardwares-Vibration Dampers for Drake ACSR Conductor with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A6- OPGW Cable and its Accessories- 48F (DWSM) OPGW fibre optic cable with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A6- OPGW Cable and its Accessories- Suspension clamp assembly for 48 Fibre OPGW with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A6- OPGW Cable and its Accessories- Tension Assembly- Dead end for 48 Fibre OPGW with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A6- OPGW Cable and its Accessories- Tension Assembly -Double tension pass through/passing tension for 48 Fibre OPGW with all lead and lifts etc. complete as per specifications and directions of Engine...
A6- OPGW Cable and its Accessories- Tension Fitting assembly for 48 Fibre OPGW including all accessories for joint box (Splicing) location with all lead and lifts etc. complete as per specifications ...
A6- OPGW Cable and its Accessories- Tension Fitting assembly on Suspension Tower for 48 Fibre OPGW including all accessories for joint box (Splicing) location with all lead and lifts etc. complete a...
A6- OPGW Cable and its Accessories- Vibration Damper for 48 Fibre OPGW with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A6- OPGW Cable and its Accessories- Down Lead Clamp Assembly for 48 Fibre OPGW with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A6- OPGW Cable and its Accessories- Joint Box for 48 Fibre OPGW with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
A7- FODP- FODP 96F - Indoor type consisting of 2 nos. of rack
mounted LIU (to be housed in FODP) with 24 ports
each with FCPC coupling & pig
( 1 No. at 220kV KIADB Vasanthanarasapura & 2 Nos. at 400kV...
FIBRE OPTIC ARMOURED APPROACH CABLE -48 Fibre (DWSM) including Installation Hardware
set for 48 Approach Cable with all lead and lifts etc. complete as per specifications and directions of Engineer I...
Part-B- Erection Portion- B1- Check survey to be conducted during construction stage- Conducting detailed check survey along the approved route duly following the route alignment, GPS co-ordinates, su...
B2- Conducting Drone survey of Transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurement of vertical, horizontal & ground clearance...
B3 Design, developing Structural and Shop drawings of 220 kV double circuit design based Monopole Towers as per the Technical Specifications including foundations (Including prototype assembly & dist...
B3 Design, developing Structural and Shop drawings of 220 kV double circuit design based Monopole Towers as per the Technical Specifications including foundations (Including prototype assembly & dist...
B4-Erection of Monopoles- Erection of Galvanised 220kV DC & MC Monopoles including cross arms, base plates with anchor bolts, anticlimbing device, step bolts and Bolt & Nuts and other components (I) ...
B5- Erection of Lattice Towers- (I) Erection of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- (i) Tower type 'MDplus0' Normal a. HT Steel with all lead and lifts etc. comp...
B5- Erection of Lattice Towers- (I) Erection of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- (i) Tower type 'MDplus0' Normal b. MS Steel with all lead and lifts etc. comp...
B5- Erection of Lattice Towers- (I) Erection of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- (i) Tower type 'MDplus0' Normal c. Auxiliary Cross arm c.i. HT Steel with al...
B5- Erection of Lattice Towers- (I) Erection of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- (i) Tower type 'MDplus0' Normal c. Auxiliary Cross arm c.ii. MS Steel with al...
B5- Erection of Lattice Towers- (I) Erection of galvanised 220/220kV MC NBT (VKTP design tower) Transmission Line Towers- (i) Tower type 'MDplus0' Normal d. Stub & Cleat (HT steel) with all lead and ...
B5- Erection of Lattice Towers- (II) Erection of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers- Tower type 'DDplus0' Normal- a. HT Steel with all lead and lifts etc. compl...
B5- Erection of Lattice Towers- (II) Erection of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers- Tower type 'DDplus0' Normal- b. MS Steel with all lead and lifts etc. comp...
B5- Erection of Lattice Towers- (II) Erection of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers- Tower type 'DDplus0' Normal- c. Auxiliary Cross arm- c.i. HT Steel with al...
B5- Erection of Lattice Towers- (II) Erection of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers- Tower type 'DDplus0' Normal- c. Auxiliary Cross arm- c.ii. MS Steel with ...
B5- Erection of Lattice Towers- (II) Erection of galvanised 220kV DC NBT (Hoody-HAL design tower) Transmission Line Towers- Tower type 'DDplus0' Normal- d. Stub & Cleat (HT steel) with all lead and ...
B5- Erection of Lattice Towers- III- Erection of galvanised 66kV DC NBT (KPTCL design tower) Transmission Line Towers- Tower type 'DDplus0' Normal a. MS Steel with all lead and lifts etc. complete a...
B5- Erection of Lattice Towers- III- Erection of galvanised 66kV DC NBT (KPTCL design tower) Transmission Line Towers- Tower type 'DDplus0' Normal b. Auxiliary Cross arm (i). MS Steel with all lead a...
B5- Erection of Lattice Towers- III- Erection of galvanised 66kV DC NBT (KPTCL design tower) Transmission Line Towers- Tower type 'DDplus0' Normal c. Stub & Cleat (MS steel) with all lead and lifts ...
B5- Erection of Lattice Towers- IV Erection of galvanised 66kV DC Single side cross arm NBT (HSR design tower) Transmission Line Towers- (i) Tower type 'DDplus0' Normal. a. HT Steel with all lead and...
B5- Erection of Lattice Towers- IV Erection of galvanised 66kV DC Single side cross arm NBT (HSR design tower) Transmission Line Towers- (i) Tower type 'DDplus0' Normal. b. MS Steel with all lead and...
B5- Erection of Lattice Towers- IV Erection of galvanised 66kV DC Single side cross arm NBT (HSR design tower) Transmission Line Towers- (i) Tower type 'DDplus0' Normal. c. Stub & Cleat (HT steel) wi...
B6- Erection of Galvanised Bolts & Nuts for tower parts, extensions and stubs (I) B&N for 220/220kV MC NBT (VKTP design tower)(i) Tower type 'MDplus0' Normal with all lead and lifts etc. complete as ...
B6- Erection of Galvanised Bolts & Nuts for tower parts, extensions and stubs (I) B&N for 220/220kV MC NBT (VKTP design tower) (ii) Auxiliary Cross arm with all lead and lifts etc. complete as per sp...
B6- Erection of Galvanised Bolts & Nuts for tower parts, extensions and stubs- (II) B&N for 220kV DC NBT (Hoody-HAL design tower) (i) Tower type 'DDplus0' Normal with all lead and lifts etc. complete ...
B6- Erection of Galvanised Bolts & Nuts for tower parts, extensions and stubs- (II) B&N for 220kV DC NBT (Hoody-HAL design tower) (ii) Auxiliary Cross arm with all lead and lifts etc. complete as per ...
B6- Erection of Galvanised Bolts & Nuts for tower parts, extensions and stubs- (III) B&N for 66kV DC NBT (KPTCL design tower)- (i) Tower type 'DDplus0' Normal with all lead and lifts etc. complete as ...
B6- Erection of Galvanised Bolts & Nuts for tower parts, extensions and stubs- (III) B&N for 66kV DC NBT (KPTCL design tower) (ii) Auxiliary Cross arm with all lead and lifts etc. complete as per spec...
B6- Erection of Galvanised Bolts & Nuts for tower parts, extensions and stubs- (IV) B&N for 66kV DC Single side cross arm NBT (HSR design tower)- (i) Tower type 'DDplus0' Normal with all lead and lift...
B7- Stub setting templates- (i) Setting of stub templates and aligning dismantling and transportation of templates from one location to another location (a). For 220kV towers with all lead and lifts e...
B7- Stub setting templates- (i) Setting of stub templates and aligning dismantling and transportation of templates from one location to another location (b). For 66kV towers with all lead and lifts et...
B7- Stub setting templates (ii) Tack welding of Bolts and Nuts (No of tower x 500) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
B8-Tower Accessories- (1) Number Plates (1 No. per tower) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
B8-Tower Accessories- (2) Danger Plates (1 No. per tower) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
B8-Tower Accessories- (3) Circuit Plates (1 No. per circuit) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
B8-Tower Accessories- (4) Phase Plates (Set of 6 Nos.) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
B8-Tower Accessories- (5) Grounding of tower including cost of 40mm dia, 2.5mm thick, class 'C' GI pipe of 3mtrs length as per specifications with 50x6 GI flats 3 mtrs long, salt, charcoal, including ...
B8-Tower Accessories- (7) Supply and fixing GI angle iron 45 x 45 x 5 mm (1m length) with cleats, bolts & nuts as per specifications and fixing above 0.5m length each at inner and outer surface of the...
B9- Stringing of Conductor- Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and jointing of cond...
B9- Stringing of Conductor- Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and jointing of cond...
B9- Stringing of Conductor- Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and jointing of cond...
B9- Stringing of Conductor- Paving out conductor from anchor to anchor normally spaced at 5 spans with 4 tangent towers in between, including providing stays at each anchor points and jointing of cond...
B10- OPGW Cable and its Accessories- (1) 48F (DWSM) OPGW fibre optic cable with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
B10- OPGW Cable and its Accessories- (2) Joint Box for 48 Fibre OPGW with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
B11- FODP- Installation, testing & commissioning of FODP for 24F/48F/96F - Indoor type, rack mounted with FCPC coupling and pigtails with all lead and lifts etc. complete as per specifications and dir...
B12- FIBRE OPTIC ARMOURED APPROACH CABLE- Laying, installation, testing & commissioning of 12/24/48 F Optical fibre approach cable in switch yards of 400 kV &
220 kV (Including hardware) along with HD...
Part-C- CIVIL PORTION- Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication- Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Back filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc., in layers not exceeding 20cm in depth, consolidating each deposited...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Bituminous course with all lead and lifts etc. complete as pe...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Mean Granular course with all lead and lifts etc. ...
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...
Construction of Granular Sub-Base of grading V material as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight...
Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and ...
Tower Protection- Provision for Providing safety damage protection cage around Monopole tower as per specification and design inclusive of supply of all materials, erection charges and civil work. Rat...
Liners used in Monopoles foundation works with GI sheets of thickness 1.2mm are provided to protect Steel reinforcement from corrosion (to avoid direct contact with soil) including supply, formation e...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Part-A- Supply Portion- 220kV Single core 1200 Sq.mm, XLPE insulated, Lead Sheathed overall PE Sheathed UG cable (E) grade,1 core, circular, stranded, plain annealed compacted, milliken copper conduc...
Normal Straight through joints suitable for 220kV, 1 Core pre moulded design 1200sq.mm copper conductor, XLPE lead sheathed cable with all lead and lifts etc. complete as per specifications and direct...
Out door type Cable end termination Polymeric Design/ Pre moulded outdoor type suitable for the above 220kV (E) class single 1 core 1200 sq.mm lead sheathed cable including PVC Earthing cable with all...
220 kV Link boxes, single phase outdoor structure mounting type with SVL/CCPU suitable for 1200sqmm UG cable including the cost of 400sq.mm sheath bonding cable with all lead and lifts etc. complete a...
220kV Link boxes, three phase buried type with SVL/CCPU including 400sq.mm sheath bonding cable and 400/400sq.mm co-axial cable as per technical specification suitable for 220kV 1200sq.mm UG cable. ...
220kV Surge arrestor-198 kV Metal Oxide type, with surge counter (Discharge Class - 3) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Terminal connectors to connect cable end termination to the AAAC Moose conductor with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
PLCC Equipments- Unarmoured Underground FO cable (48 F DWSM) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
PLCC Equipments- Polyvinyl Lubricated Bond (PLB) HDPE OD 40mm pipe with accessories with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
PLCC Equipments- Straight Joint kit for optical fibre cable 48 F with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
PLCC Equipments- Line Interface unit suitable for 48F optical fibre cable with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
PLCC Equipments- OPGW to OFC jointing kit 48F with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
PLCC Equipments- Media Converter with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
PLCC Equipments- Collars for PLB Pipe with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
PLCC Equipments- Armoured FO cable ( 6F DWSM ) (for extending protection) Market Rate considered with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
UG CABLE MANDATORY SPARES 220kV Single core 1200 Sq.mm., XLPE insulated, Lead Sheathed overall PE Sheathed UG cable (E) grade,1 core, circular, stranded, plain annealed compacted, milliken copper con...
Normal Straight through joints suitable for 220KV 1 core pre moulded design 1200sq.mm copper conductor, XLPE lead sheathed cable with all lead and lifts etc. complete as per specifications and directi...
Out door type Cable end termination Polymeric Design/ Pre moulded outdoor type suitable for the above 220kV (E) class single 1 core 1200 sq.mm lead sheathed cable including PVC Earthing cable with all...
220 kV Link boxes, single phase outdoor structure mounting type with SVL/CCPU suitable for 1200sqmm UG cable including the cost of 400sq.mm sheath bonding cable with all lead and lifts etc. complete a...
220kV Link boxes, three phase buried type with SVL/CCPU including 400sq.mm sheath bonding cable and 400/400sq.mm co-axial cable as per technical specification suitable for 220kV 1200sq.mm UG cable. ...
Part-B- ERECTION PORTION- UG Cable survey- Surveying of cable route, excavation trial holes as per field requirements, preparation of cable route profile drawings for cable laying, final route alignme...
Laying including testing and commissioning -
Laying of 220KV single core, 1200sqmm sqmm XLPE Segmental compact type miliken Copper cable in trefoil, tapping , fixing pipes for drain and gate crossin...
Handling & making normal straight joints/ insulated shield break type for 220 KV power cables with all consumables at site etc., with all lead and lifts etc. complete as per specifications and direct...
Handling & making of cables end termination for 220KV power cables with all consuambles at site etc., with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Erection of single phase earth link boxes (3 Nos), on to the cable end termination structure/tower connecting earth leads with all lugs, fixtures, clamps, bolts, and nuts with all lead and lifts etc. ...
Erection of three phase earth link boxes at joint bay/structure with connecting earth leads, all lugs, fixtures, clamps, bolts, and nuts complete. (for straight/ cross bonds) with all lead and lifts e...
Laying of 24 / 48 fibre dual window mono mode (DWMM) optical fibre cable as per drawings & specifications with all lead and lifts etc. complete as per specifications and directions of Engineer Incharg...
Handling & making straight through joints closures for 24/ 48 fibre dual window mono mode ( DWMM) optical fibre cable with all lead and lifts etc. complete as per specifications and directions of Engi...
Handling & making terminal joints for 24/48 fibre dual window mono mode ( DWMM) optical fibre cable with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Erection of Surge Arrestor-
198 kV Metal Oxide with surge counter Arrestor class - Station Medium Duty (SM) - Discharge Class 3 - for Overhead Line, Transformer & UG Cable with all lead and lifts etc....
Grounding of equipments by providing cast iron pipe of 100 mm ID 13mm thickness , 2.75 m long with 2 part clamp out of GI flat 50X6 mm as per drawing including the cost of excavation with all lead and...
Supplying & Providing 450mm dia 450mm height 1.5" to 2' thich hume pipe collar (non pressure type) for eatrth pits including all leads and lifts etc with all lead and lifts etc. complete as per specif...
Survey & documentation with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Charges for conducting precommissioning tests as per IEC 60840, IS 7098 Part - III and successful commissioning of UG Transmission line with all lead and lifts etc. complete as per specifications and...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Bituminous course with all lead and lifts etc. complete as ...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical Mean Granular course with all lead and lifts etc....
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...
Providing M-Sand - Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...
Supplying and Providing pre cast RCC Protection Covers using M20 grade Concrete, steel of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the cost of...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Removal of Unserviceable Soil with Disposal upto a suitable distance with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Supplying and Providing Pre cast Cable Route/ Joint marker using M15 grade Concrete, MS rods of approved size/shape (as per the approved drawings) to be laid in UG cable works. The rate includes the c...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying of warning tape / Caution tape / detector tape for HDPE pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant ISS with latest amendments with appurtenances....
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
a) HDD method for 220 kV UG Cable work- Supplying and Installation of 3 rows of HDPE pipes PE 80 PN6 of 250 mm dia using Horizontal directional drilling technique (HDD method) including preparing and ...
Steel Fabrication- Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Construction of Granular Sub-Base of grading V material as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Prime Coat over WMM/WBM- Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...
Tack coat on Granular surface treated with primer-Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2on the prepared bituminous ...
Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity HMP batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.5 per cent by weight...
Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and ...
Part-A- Supply Portion- SF-6 CIRCUIT BREAKER- SF-6 Circuit Breaker with rigid bi-metallic terminal connector suitable for single/double Moose ACSR with spring / semi-pneumatic / pneumatic type operati...
Part-A- Supply Portion- SF-6 CIRCUIT BREAKER- SF-6 Circuit Breaker with rigid bi-metallic terminal connector suitable for single/double Moose ACSR with spring / semi-pneumatic / pneumatic type operati...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 220kV class Isolators- 220kV, electrically cum manually operated double br...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 220kV class Isolators- 220kV, electrically cum manually operated double br...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 220kV class Isolators- 220kV, electrically cum manually operated double br...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 220kV class Isolators- 220kV, electrically cum manually operated double br...
66kV class Isolators- 66 kV, double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for 63mm Al. tube/Moose ACSR/Twin Moose ACSR conductor, ma...
66kV class Isolators- 66 kV, double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for 63mm Al. tube/Moose ACSR/Twin Moose ACSR conductor, ma...
66kV class Isolators- 66 kV, double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for 63mm Al. tube/Moose ACSR/Twin Moose ACSR conductor, ma...
66kV class Isolators- 66 kV, double break electrically cum manually operated isolators with solid core insulator, terminal connector suitable for 63mm Al. tube/Moose ACSR/Twin Moose ACSR conductor, ma...
CURRENT TRANSFORMERS- Oil filled Current Transformers with rigid terminal connector suitable for Drake ACSR/Al tube (i) 220KV, 50kA CT of Ratio 1200-800-600-300/1-1-1A with additional 2 Cores of 1200/...
CURRENT TRANSFORMERS- Oil filled Current Transformers with rigid terminal connector suitable for Drake ACSR/Al tube (ii) 66kV 40KA CT of Ratio 800-400/1-1-1A, (Required for line) with all lead and li...
Capacitor Voltage Transformers - 245 kV CVT, 4400 PF, 1 Ph CVT with 2 secondaries, terminal connector suitable for Twin Moose ACSR conductor with marshalling box etc., complete as per technical specif...
Surge Arresters with terminal connectors suitable for Twin Moose ACSR-
Note- Surge Arresters are with Surge Monitors & Insulating Base (i) 198KV, 10KA, Class-III, Metal Oxide Type (Class - SM)with ...
Surge Arresters with terminal connectors suitable for Twin Moose ACSR-
Note- Surge Arresters are with Surge Monitors & Insulating Base 60KV, 10KA, Discharge Class 3 (Station Medium Duty (SM)), Meta...
1)Relay & Protection Panels-220 kV Line -Type 2L (Annexure RPP1-Cable -SAS) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
1)Relay & Protection Panels- 66KV Line- Type 6L(As per Annexure RPP4-Cable-SAS)
Note - The Proposed C&R Panel shall be interfaced with existing SAS & Bus bar protection with all lead and lifts etc. c...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (a) 220KV Side Station Structure- (i) Station Structure Tower -2T1 with peak
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (a) 220KV Side Station Structure-(ii) Station Structure Tower -2T2 without peak
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (a) 220KV Side Station Structure- (iii) Station Structure beam suitable for fixing underh...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (a) 220KV Side Station Structure- (iv)Station Structure beam - 2B2 without underhang isola...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (b) 66KV Side Station Structures (i) Station Structure Tower -6T3 with peak
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (b) 66KV Side Station Structures (ii) Station Structure Beam suitable for fixing under ...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (b) 66KV Side Station Structures (iii) Lighting mast with all lead and lifts etc. com...
Mounting Structures- (i) Isolators- (i) 220 kV Isolator Live point height 8250 mm .(1.438 t per Structure with all lead and lifts etc. complete as per specifications and directions of Engineer Incharg...
Mounting Structures- (i) Isolators- (ii) 220 kV Isolator Live point height 5750 mm .(0.937MT per Structure with all lead and lifts etc. complete as per specifications and directions of Engineer Inchar...
Mounting Structures- (i) Isolators- (iii) 66 kV Isolator Live point height 6350 mm . (0.924MT per Structure) with all lead and lifts etc. complete as per specifications and directions of Engineer Inch...
Mounting Structures- (i) Isolators- (iv) 66 kV Isolator Live point height 4600 mm . (0.741 T per Structure) with all lead and lifts etc. complete as per specifications and directions of Engineer Incha...
Mounting Structures- (ii) Current transformer- (i) Current transformer. 220 kV & NCT's . (0.16plus0.01=0.170 MT per Structure) with all lead and lifts etc. complete as per specifications and dir...
Mounting Structures- (ii) Current transformer- (ii) Current transformer. 66 kV & NCT's and 11kV NCT . (0.152MT per Structure) with all lead and lifts etc. complete as per specifications and directi...
Mounting Structures- (iii) Voltage transformer/ CVTs- Capacitor Voltage transformer. 220 kV .0.180 MT per Structure) with all lead and lifts etc. complete as per specifications and directions of Eng...
Mounting Structures- (iv) Surge arrestor (a) Lightening Arrestors. 220 kV 198KV . (0.18plus0.05=0.185MT per Structure) with all lead and lifts etc. complete as per specifications and directions of Eng...
Mounting Structures- (iv) Surge arrestor (b) Lightening Arrestors. 66 kV . (0.111MT per Structure) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Mounting Structures-v) For Post Insulator of Rigid Bus (a) Post insulators for Rigid bus 220 kV side. - LPH 5750 (0.1440 MT per Structure) with all lead and lifts etc. complete as per specificatio...
RIGID BUS WITH TAPS & CLAMPS- (i) Aluminium Tube Conforming to 6340 WP of IS-5082/1969 (BS1600-Sch.40) of following sizes. a. 75mm Size - 220KV Side
Note- Quantity indicated is 5% more than the requi...
RIGID BUS WITH TAPS & CLAMPS- (i) Aluminium Tube Conforming to 6340 WP of IS-5082/1969 (BS1600-Sch.40) of following sizes. b. 63mm Size for connecting isolator to vertical tap -220KV Side with all le...
RIGID BUS WITH TAPS & CLAMPS- (i) Aluminium Tube Conforming to 6340 WP of IS-5082/1969 (BS1600-Sch.40) of following sizes. c. 50mm Size for connecting isolator to vertical tap - 66KV Side with all lea...
RIGID BUS WITH TAPS & CLAMPS- a) Inverted ‘V’ taps made of 63mm Aluminium Tube (BS-1600) of 2500mm vertical height for vertical portion and cross bus on 220KV Side with rounded off end with all le...
RIGID BUS WITH TAPS & CLAMPS- b. Straight taps made of 63mm Aluminium Tube (BS-1600) of 1250mm vertical height for vertical portion and cross bus on 66kV side with rounded off end with all lead and l...
RIGID BUS WITH TAPS & CLAMPS- (iii) A. Post Insulator Clamp suitable for 75mm Aluminum pipe and post Insulators Solid Core Type.
220kV Side a) Rigid Type with all lead and lifts etc. complete as pe...
RIGID BUS WITH TAPS & CLAMPS- (iii) A. Post Insulator Clamp suitable for 75mm Aluminum pipe and post Insulators Solid Core Type. 220kV Side b) Expansion Type with all lead and lifts etc. complete as p...
RIGID BUS WITH TAPS & CLAMPS- (iii) A. Post Insulator Clamp suitable for 75mm Aluminum pipe and post Insulators Solid Core Type.220kV Side B. Corona Bell Suitable for Aluminium Pipe of Size a. 75mm ...
RIGID BUS WITH TAPS & CLAMPS- (iii) A. Post Insulator Clamp suitable for 75mm Aluminum pipe and post Insulators Solid Core Type.220kV Side B. Corona Bell Suitable for Aluminium Pipe of Size b. End cap...
RIGID BUS WITH TAPS & CLAMPS- (iii) A. Post Insulator Clamp suitable for 75mm Aluminum pipe and post Insulators Solid Core Type.220kV Side B. Corona Bell Suitable for Aluminium Pipe of Size b. End cap...
ACSR Conductor- Moose ACSR with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Insulators- i. Post Insulators -Cylindrical Solid Core Insulators as per IS-5350, Part-II & III, a). For 220KV Side-2 Units / Stack (i). Post Insulators of Rigid Bus with all lead and lifts etc. co...
ii. Disc Insulators String- A. 11KV, 120KN Disc Insulator (a) 220KV Side- Double Tension string - String of 16 Units (For Line, B/C) with all lead and lifts etc. complete as per specifications and ...
ii. Disc Insulators String- A. 11KV, 120KN Disc Insulator (b) 66KV Side-Tension String - String of 6 Units with all lead and lifts etc. complete as per specifications and directions of Engineer Inc...
ii. Disc Insulators String- B. 11KV 90KN Disc Insulator- 220KV side suspension string - string of 14 units with all lead and lifts etc. complete as per specifications and directions of Engineer Incha...
ii. Disc Insulators String- B. 11KV 90KN Disc Insulator- 66KV side suspension string -string of 6 units with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge...
Insulator Hardware & Clamps- i. Bolted Type tension clamp to suit Moose ACSR (a) 220KV Side - Line bay with all lead and lifts etc. complete as per specifications and directions of Engineer Incharg...
Insulator Hardware & Clamps- i. Bolted Type tension clamp to suit Moose ACSR (b) 66KV Side - Line bay with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge...
Insulator Hardware & Clamps- ii.Bolted type Double Tension clamp to suit twin Moose ACSR220KV side -Line bay with all lead and lifts etc. complete as per specifications and directions of Engineer Inch...
Insulator Hardware & Clamps- iii. Bolted type suspension clamp to suit Moose ACSR (a) 66KV Side -Line bays with all lead and lifts etc. complete as per specifications and directions of Engineer Incha...
Insulator Hardware & Clamps- iv. Bolted type suspension clamp to suit Double Moose ACSR a). 220KV side -Line Bays with all lead and lifts etc. complete as per specifications and directions of Enginee...
Insulator Hardware & Clamps- v. ‘C’ Type Wedge connector suitable for Moose to Moose ACSR. (a) 66KV Side - Line bays with all lead and lifts etc. complete as per specifications and directions of ...
Insulator Hardware & Clamps- vi. ‘C’ Type Wedge connector suitable for Twin Moose to Twin Moose -220KV side -Line bays with all lead and lifts etc. complete as per specifications and directions o...
Insulator Hardware & Clamps- vii. 'C’ Type wedge connector suitable for AAAC Moose to Twin Moose ACSR for 220kV Line with all lead and lifts etc. complete as per specifications and directions of E...
Insulator Hardware & Clamps- viii. Spacers for Twin Moose ACSR 220kV side (Rigid/Flexible) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
a) PVC insulated aluminium power cable (AC supply for lighting etc)-70 Sq.mm 3.5 Core, with glands / lugs / ferrules with all lead and lifts etc. complete as per specifications and directions of Engin...
AC Distribution Box (outdoor)- (i). AC Distribution Box Single front Type, 6 terminals, 750 x 1350 x 300mm, 1 I/C of 100A, MCCB 20KAplus6 0/G MCB 16A plus 1 O/G of 100A, HRC Fuse. with all lead and li...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 19 Core with all lead and lifts etc. complete as...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 14 Core with all lead and lifts etc. complete a...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 10 Core with all lead and lifts etc. complete as...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 4 Core with all lead and lifts etc. complete as ...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 7 Core with all lead and lifts etc. complete as...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 6 Sq.mm 4 Core with all lead and lifts etc. complete as pe...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 16 Sq.mm 4 Core with all lead and lifts etc. complete as ...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 4 Sq.mm 4 Core with all lead and lifts etc. complete as pe...
STATION & YARD LIGHTING (OUTDOOR) ((To be designed, assessed & quoted by the bidder)) Supply and installation/ Fixing/ Provision o f Outdoortype Thermoplastic Modular Panel enclosure with transpar...
PVC Insulated Copper Control Cables - 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification. with all lead and lifts etc. complete as per specificatio...
Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...
FOTE- Communication Equipments
Note-- The FOTE- Communication equipments/ materials are consired only for TB at 220kV KIADB S/S & 400kV PGCIL substaion) Optical Interface. S16.1 SFP-(30Kms) 1 No. at ...
FOTE- Communication Equipments
Note-- The FOTE- Communication equipments/ materials are consired only for TB at 220kV KIADB S/S & 400kV PGCIL substaion) Tributary Interface. Cabinet Equipment to hous...
FOTE- Communication Equipments
Note-- The FOTE- Communication equipments/ materials are consired only for TB at 220kV KIADB S/S & 400kV PGCIL substaion) Tributary Interface. E1 to Optical converter ...
Part-B- Erection Portion (Including Testing & Commissioning)- SF-6 CIRCUIT BREAKER- SF-6 Circuit Breaker with rigid bi-metallic terminal connector suitable for single/double Moose ACSR with spring / s...
Part-B- Erection Portion (Including Testing & Commissioning)- SF-6 CIRCUIT BREAKER- SF-6 Circuit Breaker with rigid bi-metallic terminal connector suitable for single/double Moose ACSR with spring / s...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 220kV class Isolators-
220kV, electrically cum manually operated double b...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 220kV class Isolators-
220kV, electrically cum manually operated double b...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 220kV class Isolators-
220kV, electrically cum manually operated double b...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 220kV class Isolators-
220kV, electrically cum manually operated double b...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 66kV class Isolators- 66 kV, double break electrically cum manually operat...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 66kV class Isolators- 66 kV, double break electrically cum manually operat...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 66kV class Isolators- 66 kV, double break electrically cum manually operat...
ISOLATORS- Isolators and Terminal connectors as per Technical specification including solid core cylindrical post insulators- 66kV class Isolators- 66 kV, double break electrically cum manually operat...
CURRENT TRANSFORMERS- Oil filled Current Transformers with rigid terminal connector suitable for Drake ACSR/Al tube (i) 220KV, 50kA CT of Ratio 1200-800-600-300/1-1-1A with additional 2 Cores of 1200/...
CURRENT TRANSFORMERS- Oil filled Current Transformers with rigid terminal connector suitable for Drake ACSR/Al tube (ii) 66kV 40KA CT of Ratio 800-400/1-1-1A, (Required for line) with all lead and lif...
Capacitor Voltage Transformers - 245 kV CVT, 4400 PF, 1 Ph CVT with 2 secondaries, terminal connector suitable for Twin Moose ACSR conductor with marshalling box etc., with all lead and lifts etc. com...
Surge Arresters with terminal connectors suitable for Twin Moose ACSR-
Note- Surge Arresters are with Surge Monitors & Insulating Base (i) 198KV, 10KA, Class-III, Metal Oxide Type (Class - SM) with...
Surge Arresters with terminal connectors suitable for Twin Moose ACSR-
Note- Surge Arresters are with Surge Monitors & Insulating Base. 60KV, 10KA, Discharge Class 3 (Station Medium Duty (SM)), Meta...
Relay & Protection Panels- 220 kV Line -Type 2L (Annexure RPP1-Cable -SAS) Note - The Proposed C&R Panel shall be interfaced with existing SAS & Bus bar protection with all lead and lifts etc. complet...
Relay & Protection Panels- 66KV Line- Type 6L(As per Annexure RPP4-Cable-SAS) Note - The Proposed C&R Panel shall be interfaced with existing SAS & Bus bar protection with all lead and lifts etc. com...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (a) 220KV Side Station Structure- (i) Station Structure Tower -2T1 with peak
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (a) 220KV Side Station Structure- (ii) Station Structure Tower -2T2 without peak (1.272...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (a) 220KV Side Station Structure-(iii) Station Structure beam suitable for fixing underha...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (a) 220KV Side Station Structure- (iv)Station Structure beam - 2B2 without underhang isola...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (b) 66KV Side Station Structures (i) Station Structure Tower -6T3 with peak
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (b) 66KV Side Station Structures (ii) Station Structure Beam suitable for fixing under ...
Station Structure - (Rates of Fabrication, galvanising, supply of Mild steel tower materials is considered) (b) 66KV Side Station Structures (iii) Lighting mast
Mounting Structures- (i) Isolators- 220 kV Isolator Live point height 8250 mm .(1.438 t per Structure with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Mounting Structures- (i) Isolators- 220 kV Isolator Live point height 5750 mm .(0.937MT per Structure with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Mounting Structures- (i) Isolators- 66 kV Isolator Live point height 6350 mm . (0.924MT per Structure) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Mounting Structures- (i) Isolators- 66 kV Isolator Live point height 4600 mm . (0.741 T per Structure) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Mounting Structures- (ii) Current transformer- Current transformer. 220 kV & NCT's . (0.16plus0.01=0.170 MT per Structure) with all lead and lifts etc. complete as per specifications and directi...
Mounting Structures- (ii) Current transformer- Current transformer. 66 kV & NCT's and 11kV NCT . (0.152MT per Structure) with all lead and lifts etc. complete as per specifications and directions o...
Mounting Structures- (iii) Voltage transformer/ CVTs Capacitor Voltage transformer. 220 kV .0.180 MT per Structure) with all lead and lifts etc. complete as per specifications and directions of Eng...
Mounting Structures- (iv) Surge arrestor Lightening Arrestors. 220 kV 198KV . (0.18plus0.05=0.185MT per Structure) with all lead and lifts etc. complete as per specifications and directions of Engine...
Mounting Structures- (iv) Surge arrestor Lightening Arrestors. 66 kV . (0.111MT per Structure) with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Mounting Structures- v) For Post Insulator of Rigid Bus- a) Post insulators for Rigid bus 220 kV side. - LPH 5750 (0.1440 MT per Structure) with all lead and lifts etc. complete as per specificati...
RIGID BUS WITH TAPS & CLAMPS- (i) Aluminium Tube Conforming to 6340 WP of IS-5082/1969 (BS1600-Sch.40) of following sizes.a. 75mm Size - 220KV Side
Note- Quantity indicated is 5% more than the require...
RIGID BUS WITH TAPS & CLAMPS- (i) Aluminium Tube Conforming to 6340 WP of IS-5082/1969 (BS1600-Sch.40) of following sizes.b. 63mm Size for connecting isolator to vertical tap - 220KV Side with all lea...
ACSR Conductor- Moose ACSR- Formation of Main/ Cross bus 220kV side with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
ACSR Conductor- Moose ACSR- Formation of Main/ Cross bus 66kV side with all lead and lifts etc. complete as per specifications and directions of Engineer Incharge.
Insulators (i) Post Insulators -Cylindrical Solid Core Insulators as per IS-5350, Part-II & III (a). For 220KV Side-2 Units / Stack (i). Post Insulators of Rigid Bus with all lead and lifts etc. c...
a) PVC insulated aluminium power cable (AC supply for lighting etc)-
70 Sq.mm 3.5 Core, with glands / lugs / ferrules with all lead and lifts etc. complete as per specifications and directions of Engi...
AC Distribution Box (outdoor)- AC Distribution Box Single front Type, 6 terminals, 750 x 1350 x 300mm, 1 I/C of 100A, MCCB 20KAplus6 0/G MCB 16A plus 1 O/G of 100A, HRC Fuse. with all lead and lifts e...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 19 Core with all lead and lifts etc. complete as...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 14 Core with all lead and lifts etc. complete ...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 10 Core with all lead and lifts etc. complete as...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 4 Core with all lead and lifts etc. complete as ...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 2.5 Sq.mm 7 Core with all lead and lifts etc. complete as...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 6 Sq.mm 4 Core with all lead and lifts etc. complete as pe...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 16 Sq.mm 4 Core with all lead and lifts etc. complete as ...
Control cable- PVC Insulated Copper Control Cable with lugs / ferrules (Refer annexure for details at the end of this schedule of quantities) 4 Sq.mm 4 Core with all lead and lifts etc. complete as p...
STATION & YARD LIGHTING (OUTDOOR)- (To be designed, assessed & quoted by the bidder) PVC Insulated Copper Control Cables - 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as p...
FOTE- Communication Equipments- Note-- The FOTE- Communication equipments/ materials are consired only for TB at 220kV KIADB S/S & 400kV PGCIL substaion) Tributary Interface. Cabinet Equipment to hou...
Earth Mat Formation- Grounding of equipments with 75x12 mm G I flat and connecting equipments to the earth mat/ ground pit including all connected works with all lead and lifts etc. complete as per sp...
Earth Mat Formation- Providing C.I . Pipe of 100mm ID 13mm thick 2.75mtr long with 2 part GI flat 50x6 mm clamp welded all round the pipe etc., including cost of excavation with all lead and lifts etc...
Earth Mat Formation- Suppling and fixing 450mm dia x450mm height 1.5" to 2" Hume pipe collars for earth pits with all lead and lifts etc. complete as per specifications and directions of Engineer Inch...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Steel Fabrication- Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1-6, bed concrete 150mm thick with 1-3-6, plaster...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1-6, bed concrete 150mm thick with 1-3-6, plaster...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Detailed survey report and map.pdf
Others - Survey report along with map • 5.76 MB
Bid document.pdf
Tender Document • 1.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].