GENERAL-Chithari SWE Regulator-Construction of SWE Regulator on upstream of Old Chithari SWE Regulator cum Bridge across Chithari River in Kasaragod District-General Mechanical Work-1

Amount

Fabrication, supply & erection of MS & SS embedded parts (SS304 L Grade) for 2 types of vertical lift shutters

OD10254/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD10255/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD10257/2022-2023:Supply of MS round bar including cost of conveyance charges

85.108:Fabrication , erection and commissioning of Structural Steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charge etc complete but exculding cost of materials already supplied

OD14621/2022-2023:Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in correct position and alignment by welding SS Embedded parts in 304L Grade as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete

OD194/2023-2024:Supply of M.S Bolt with nut and washer

Supply of materials, fabrication, painting and erection of 2 types of vertical lift MS shutters

OD10260/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD10262/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD21692/2022-2023:Supply of MS round bar including cost of conveyance charges

OD29392/2022-2023:Supply and fixing of chain for dogging beam of shutter

OD21678/2022-2023:Supply of SS bolt with nut and washer

OD14601/2022-2023:Fabrication and supply of Structural steel when gate and accessories as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.112:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site

85.111:Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

Supplying and fixing of flat type rubber seal at the bottom side; angular type at outer vertical side and bulb nose type rubber seal at the inner vertical side of 2 types of vertical lift shutters

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supplying and fixing 250 dia. cast steel thrust roller assembly for Type 1 and Type 2 shutters

OD10340/2022-2023:Supplying and fixing cast steel thrust roller assembly having 250mm dia, 60mm tread width, SS(304) shaft and 22314 E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour, all lift and lead, incidental and conveyance charges etc. complete.

Supply of materials, fabrication, painting and erection of hoisting bridge; covers and frames of driving units and rope drum for 2 types of vertical lift shutter; and 1 foot over bridge on lock chamber

OD10342/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD10343/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD22063/2022-2023:Supply of GI Flats, Angles including cost of conveyance charges

OD22114/2022-2023:Supply of aluminium plates including cost of conveyance charges

OD22118/2022-2023:Supply of aluminium sections including cost of conveyance charges

OD22149/2022-2023:Supply of aluminium round bar including cost of conveyance charges

OD22152/2022-2023:Supply of Aluminium chequered plates including cost of conveyance charges

OD10345/2022-2023:Supply of G.I. pipes 32 mm dia.

OD196/2023-2024:Supply of M.S Bolt with nut and washer

OD22083/2022-2023:Supply of G.I. Bolt with nut and washer

85.124:Fabrication and supply of Hoisting bride unit in structural steel confirming to IS2062 Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc

OD27847/2022-2023:Fabrication and erection of aluminium materials like chequered or plane plate, sections etc. including erection and fixing including labour, machinery for welding, grinding etc, lead and lift, conveyance, incidental and handling etc. but excluding materials already supplied.

OD27930/2022-2023:Painting all the exposed surfaces of the hoist bridge with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site

OD27931/2022-2023:Painting all the exposed surfaces of the hoist bridge components, ladders, handrails, etc. with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.136:Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Supplying, stacking, erecting and trial run of rope drum hoisting unit having 15 T and 10 T capacity for Type 1 and Type 2 shutters respectively including line shafts, wire rope, dial gauge and all other accessories

OD176/2023-2024:Supplying and stacking of 20 Tonne capacity rope drum hoisting unit having 5.5 m lift at a hoisting speed of about 0.50m/min (+/-10%) through pulley arrangements with 4 numbers of falls on either side with 20mm tested galvanized wire rope 6/36 construction, fibre core having breaking capcity 23853 Kg and drien by TEFC squirrel cage induction motor hoist duty tyupe having capctiy not less than an 5 HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft but including 2 nos. of plummer blocks for line shaft with bearings supported at proper intervals and including cost of electro magnetic thruster brake assembly, manual operating systems, electrical accessories like limit switch and other safety equipments as per drawings, specifications and statutory requirements, etc. complete but excluding cost of wire rope.

OD177/2023-2024:Supplying and stacking of 15 Tonne capacity rope drum hoisting unit having 5.5 m lift at a hoisting speed of about 0.50m/min (+/- 10%) through pulley arrangements with two numbers of falls on either side with 20mm tested galvanized wire rope 6/36 construction, fibre core having breaking capacity 23853kg and driven by TEFC squirrel cage induction motor hoist duty type having capacity not less than 3 HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft but including 2 nos. of plummer blocks with bearing for line shaft supported at proper intervals and including cost of electro magnetic thruster brake assembly manual operating systems, electrical accessories like limit switch and other safety equipments as per drawings specification and statutory requirements etc complete but excluding cost of wire rope.

85.128:Providing Line shaft ,material : MS rolled/ forged steel

OD22/2023-2024:Supplying and stacking 20mm tested galvanised steel wire rope 6/36 construction, fibre core having breaking capacity 23853Kg tensile designation of 1770 confirming to IS2266-2002.

85.125:Conveying and erecting in position the already supplied rope drum hoisting units ( 15T/20T/25T/30T) capacity on the hoisting bridge and correcting the alignment as far as possible manually as per the direction of departmental officer at site including cost of all labour, machinery, lead and lift and all incidental and conveyance charge etc complete

OD120/2023-2024:Providing and fixing dial guage assembly: worm reducer, dial, chain & sprokets, needle, shafts, plummer block, etc including cost of labour, tools, incidental charges,etc but excluding plates and sections.

85.135:Conveying and Fixing wire rope already supplied to the new gates and Hoisting unit safely and conducting Trial Run

Supply, fabrication and erection of MS & SS embedded parts for one lock of size 12.00m (clear vent) x 3.50m (vent height) (2 diamond gates with 8 leaves )

OD10546/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD10547/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD10548/2022-2023:Supply of MS round bar including cost of conveyance charges

OD198/2023-2024:Supply of M.S Bolt with nut and washer

OD14625/2022-2023:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS embedded parts in 304L Sill beam, Grade like roller track, seal track, Seal seat etc as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete

OD10551/2022-2023:Supply of CS Plate IS:1030 GR :340-570W as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges etc complete.

OD27936/2022-2023:Erection of pintle assembly castings including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges, etc. complete but excluding cost of materials already supplied.

85.108:Fabrication , erection and commissioning of Structural Steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charge etc complete but exculding cost of materials already supplied

Supply, fabrication, painting and erection of Lock gate, its walk way, ladders and lock wall railing: size 12.00m (clear vent) x 3.50m (vent height) (2 diamond gates with 8 leaves )

OD11049/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD11050/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD11051/2022-2023:Supply of CS Plate IS:1030 GR: 340-570W as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges etc. complete.

OD11052/2022-2023:Supply of bearing OD: 175, ID: 135, Al-Bronze as per approved specifications

OD26547/2022-2023:Supply of Aluminium chequered plates including cost of conveyance charges

OD26548/2022-2023:Supply of GI Flats, Angles including cost of conveyance charges

OD11054/2022-2023:Supply of G.I. pipes 32 mm dia

OD199/2023-2024:Supply of M.S Bolt with nut and washer

OD29432/2022-2023:Supply and fixing of expansion type anchor bolts.

OD27849/2022-2023:Fabrication and supply of structural steel Diamond lock gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

OD27850/2022-2023:Fabrication and erection of aluminium materials like chequered or plane plate, sections etc. including erection and fixing including labour, machinery for welding, grinding etc, lead and lift, conveyance, incidental and handling etc. but excluding materials already supplied.

85.112:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site

OD27938/2022-2023:Painting all the exposed surfaces of the hoist bridge components, ladders, handrails, etc. with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.111:Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

Supply and fixing of Thambakam wood (for sealing purpose) for lock gate

OD11062/2022-2023:Supply of thambakam wood including cost of conveyance charges, loading & unloading charges.

OD11063/2022-2023:Lifting, leading and fixing of thambakam wood with rubber pad on shutter for fixing rubber seal including cost of 2 rows of bolt and nuts, labour charges, hire charges etc. complete.

Supplying and fixing of rubber seals for Diamond lock gate

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supplying, stacking and fixing of Pivot assembly, cast steel guide roller, rack and pinion as assembly and operating mechanism for Diamond lock gate

OD11058/2022-2023:Supplying and fixing of Pivot assembly for diamond lock gate including plates, bushes, pins, anchor rods and other items as per drawings specifications and statutory requirements including cost of all materials, machineries, labour, all lift and lead, incidental and conveyance charges etc complete.

OD11059/2022-2023:Supplying and fixing cast steel guide roller assembly having Dia. 200mm, 70mm tread width, SS shaft and bush bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour, all lift and lead, incidental and conveyance charges etc complete

OD11060/2022-2023:Supplying and fixing 6T capacity rack and pinion assembly for operation of Diamond shape lock gate including 1.1 KW (1.5 H.P) 6 pole geared motor vertical mounted shaft extension on either side with output speed 1.4 RPM of power build ltd make series M and all accessories etc. as per approved specifications and drawings including cost of all materials, machineries, labour, all lift and lead, incidental and conveyance charges etc complete.

OD27744/2022-2023:Supplying and stacking bearing, its water tight casing; and other allied components for operation of lock gate.

OD11061/2022-2023:Conveying and fixing manual operating mechanism (Rack and pinion with handle, cast steel chuck, segment gear (full set) already supplied to the new lock gates and operating unit safely and conducting trial run.

Providing gate valve for sluice of lock gate and mooring bollards

OD27855/2022-2023:100.98.492. Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 600mm.

OD27856/2022-2023:100.31.2.12. Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 600mm diameter, Class II.

OD143/2023-2024:Supply and fixing of mooring bollard for tying boats including cost of labour, incidental and conveyance charges, etc. complete

Inspect and conducting trial run operation

OD29434/2022-2023:Inspect, adjust if necessary and conduct trial run operation

Cutting, dismantling and stacking of old regulator shutter

OD11108/2022-2023:Dismantling of the shutters (where there is road access to the point) from the grooves and stacking including cost of all machinery, labour, all incidental and conveyance charges etc complete as per the direction departmental officer at site (weight of unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%)

Cost for design and drawing of regulator and lock gates, operating mechanism, bridge etc. as per special conditions and specification given

OD190/2023-2024:Preparing design and drawing of regulator shutters (vertical type) with rope drum hoisting mechanism, embedded parts, hoist bridge etc. as per standard specifications and submitting hard copies of all GA, fabrication and detail drawings.

OD192/2023-2024:Preparing design and drawing of Lock gates (Diamond gates) including mechanism, embedded parts, etc. as per standard specifications and submitting hard copies of all GA, fabrication and detail drawings.

OD193/2023-2024:Preparing design and drawing of foot over bridge (on lock chamber) as per standard specifications and submitting hard copies of all GA, fabrication and detail drawings.

ANAR CORPORATION

Akhil Mandhana

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

Bidder Name

THE URALUNGAL LABOUR CONTRACT CO-OPERATIVE SOCIETY

HARDWARE TOOLS AND MACHINERY PROJECTS VT. LTD

Akhil Mandhana

ANAR CORPORATION