DEP(Maint)/NR/OT/Civil Job.AMC/N.ET-1469

Dismantling brick work: i) Dismantling & demolition of existing wall and brick work at all height, plastering, cement concrete, ceiling etc. ii) Removal of all garbage/ debris from site & shift to scrap area as instructed by Site in charge.

Brick Work:- 1st class brick work with modular brick in cement mortar (1:6) in foundation, plinth, ground floor and superstructure etc. where 1:6 is 1-cement and 6-sand

Brick soling with picked jhama bricks:- Brick soling with picked jhama bricks including preparation of bed as necessary with brick joints properly filled and packed with earth powdered and including necessary cushion of similar material below the soling plinth by silver sand in layers and compacting with watering and ramming (as necessary thickness 150 mm.)

Supply and Fitment of Asbestos:- Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) and fitting and fixing with 9.5mm. Dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete.

Supply and Fitment of Blue scope sheet:- Supplying, fitting & fixing Industrial Troughed Aluminium sheet of approved make & brand fitted and fixed with 75 mm & 25 mm Self tapping screw , EPDM Washer 16 mm dia & 3 mm washer etc. complete with 150 mm. end lap and one corrugation minimum side lap. (a) With 0.5 to 0.65 mm thick sheet

PCC work :- Prepare concrete of M 30 grade with well graded stone chips of 20 mm nominal size containing designed quantity of cement per Cu m.

Plaster:- a) Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course. Scaffolding / staging where necessary (Ground floor). a) Plaster prepare with 1:4 cement mortar b) 15 mm thick plaster.

Wall/Timber Painting: - with best quality acrylic emulsion paint of approval make and brand smooth surface by sand papering including using of approval putty on the surface if necessary a) on timber or plastered surface b ) Two coats

Steel painting:- With best quality synthetic enamel paint of approval make and brand smooth surface by sand papering a) On steel or other metal surface b) Two coats (Colour to be decided by site-in charge )

Tiles:- Providing and laying up to 20 mm designer thick coloured glazed tiles/chequered tiles of approved quality and size in floor, dado, skirting, laid on 25 mm thick cement mortar (1:3) complete in all respect with all labour and materials.(using cement slurry @4.4 Kg/Sq.m at back side of tiles)