Various roads under Capital Project Division No. 1 in GTS. (Providing cold milling, 30 mm BC Paver Patta and other miscellaneous Works)

Name of Work : Various roads under Capital Project Division No. 1 in GTS. (Providing cold milling, 30 mm BC Paver Patta and other miscellaneous Works)

BILL OF QUANTITIES

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

1 Distempeing (One coats) with oil bound washable distemper of approved brand and of required 88166.350 Sq.Mt. 31.91

shade on wall surfaces to give an even shade, after thorouhly brushing the surface clean of all

grease dirt, loose pieces of scales and also including distempering with oil bound washable

distemper of preparing the surface even and smooth.(Kerb & footpath)

2 Extra coat over Item No 1 for every subsequent coat of approved brand and manufacture. 88166.350 Sq.Mt. 31.91

3 Cat Eye / Road Stud / RPM: Supplying of Molded Twin ShanksRaised Pavement Markers made of 47611.000 No. 326.23

polycarbonate and ABSmoulded body and reflective panels with micro prismatic lenscapable of

providing total internal reflection of the lightentering the lens face and shall support a load of

13635 kgs.tested in accordance to ASTM D 4280 Type H and complying toSpecifications of

Category A of MORTH Circular NoRW/NH/33023/10-97 DO III Dt 11.06. 1997. The height,

widthand length shall not exceed 20 mm, 130 mm and 130 mm andwith minimum reflective

area of 13 Sqcm on each side and theslope to the base shall be 35 +/- 5 degree. The strength

ofdetachment of the integrated cylindrical shanks, (of diameternot less than 19 +/- 2 mm and

height not less than 30+/- 2 mm)from the body is to be a minimum value of 500 Kgf. Fixing

willbe by drilling holes on the road for the shanks to go inside,without nails and using epoxy

resin based adhesive as permanufacturers recommendation and The color of the markershould

be as per the IRC 35-2015 and as directed by Engineer-in-charge.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

4 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumen 41571.430 Sq.Mt. 618.78

surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white

color marking should provide liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the

day time. The marking should meet the performance criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015. The material

strictly as per the MoRTH standard of Make Asian , Katalline , Berger, Automark, GRIL, or

equivalent.(Commercial/BS grade strictly not allowed)

5 Supplying of solar road stud (Solar k tie) construction aluminium alloy steel 100 dc water proof 2082.000 No. 1692.76

design conform to IP67 Dimension 140 mm x 128mm x 82mm + 1mm height of shank + 54mm

+0.5 mm diameter of shank 42.5 mm + 0.5 mm plastic unbreakable, scratch, resistant poly

carbonate for maintenance free operation solar panel high efficiency mono-crystalline 3v/50

mAh Battery XTSRS.01. XTSRS.02. Super

capacitor 2.7 v/22 of Six super bright LED with 18000 mod view distance up to 800 meters flash

rate 1H2 according to customers requirement resist compression can take the load of 25 tons

vehicle color red and yellow working time 80 to 100 hours continuously after the battery is fully

charged and complete fixing will be drilling holes on the road for the shank to go inside with out

nails and using epoxy resin based

adhesive per manufactures recommendation and complete as directed by the Engineer.

6 Solar Blinker:-Providing and fixing of Solar Powered Traffic Blinkers LED based 30.000 No. 15006.82

300mm/200mmdia signal head with In built blinker unit haivng battery & battery charger unit

with photo electrics with complete as per technical specification clause 112 and as directed by

the Engineer; 4 mtr long stand post of 65NB Circular MS Pipe as required. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

7 Providing and fixing Mild steel sections of 1.2 mtr height (0.30 mtr below ground and, 0.9 mtr 139.000 No. 6158.97

above Ground) of 110mm Dia out to out and 3.25 mm thickness (with top closed) having 4 nos

of posts 0.50 m C/C and Base with excavating & fixing in CC grade 1:2:4 of size 0.30 x 0.30x

mtr with necessary finish including 1 primer coat and 2 coats enamel paint on Section and

joining sections by weding 2x40x2.6 mm rectangle box pipe at base along with necessary repairs

4 Nos of posts in one job, if required at a specified size and location including all tools material

as per direction of Engineer In-Charge.

8 Providing and laying cement concrete 1:2:4 (1-Cement:2-Coarse sand :4- graded stone 184.910 Cu.Mt. 3758.19

aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth

9 Cement washing with portland cement slurry on wall surface (one coat) to give a smooth finish 296.250 Sq.Mt. 12.36

including thoroughly broomings the surface to remove all dirt, mortar drops and other foreign

10 Standard Delineator: Providing and fixing of Standard Metal Delineator consisting of minimum 150.000 Each 1027.17

retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-

metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the

coefficient of retro reflection values as per ASTM D 4956 Type XI table specification. The

delineator shall be painted with powder coat of minimum 40 microns thickness, on top of which

retro reflective sheeting shall be pasted on both sides. The structure shall be manufactured in

roll forming process and shall have height not less than 800 mm above the ground, width not

less than 100 mm and shall extend not more than 300mm below the ground while being

installed. height of sheeting should be minimum 150mm whereas width of sheeting should not

be less than 75mm (should be placed every alternative 15cm). The front and back faces of the

delineator should be curved with a radius of not more than 200 mm and with delta angle (or

central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for

vehicles moving in continuous curves. The delineator shall have grooves across the length to

make the reflective sheets vandal-proof. The delineator is meant for application on gaps in

median, traffic islands, dangerous bends, roundabouts, narrow bridges etc. or as desired by site

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

11 Poly Urethane:Flexible Swiss Bollard - Providing and fixing Poly Urethane:Flexible Bollard made 75.000 No. 7019.50

out of TPU (Thermoplastic Urethane Poly Ethelene) and UV stabilized material, shall have high

flexiblity and no fedding colours, shall have fixed 3 bends of 100mm width type-I retro-reflective

sheeting tape of white colour which sheeting shall be fixed on posts using special adhesive,

which shall not easy to tear, the cylinderical shape pillar shall have diameter 160mm, height

1370mm, with square base of 250x250mm, it shall have weight over 5.0kgs, Upper circular head

shall be made of PE (Poly Ethelene) / PPCP (Polypropylene copolymer) material with 410mm

dia, print area of circular head part shall be 390mm, both the parts shall be fixed with each

other by rivetting and special glue material, with peripherial boarder of black colour made of

same kind of material, which shall have printed one side direction indication sign and another

side R&B Logo on micro prismatic type-XI retro-reflective sheeting. The flexible bollards shall be

fixed by nail of 12mm dia x 200mm length, by drilling in existing concrete / or any hard surface

by drilling and fixing by epoxy resin and hardner of make brand 3M or same kind of approved

brand material. Rate shall include cost of bollard with specified material, all kind of required

fixing materials and fixed at site including all fixing charges, surface preparation of any site

condition as per work requirements, with all lead and lift, and transportation of any distance.

The work shall be executed in direction of the engineer in charge.

12 Supplying and Fixing of Median Marker that are made of tough, high impact resistant, injection- 1800.000 No. 505.00

molded, thermoplastic body with an isosceles trapezoidal structure of length, width and height

not less than 15cm, 10cm and 10cm respectively and thickness not less than 1.8mm, the body

structure shall be rounded at its acute angle, all the corners and edges. The plastic used for

molding the Median Marker shall have a minimum Notched Izod Impact strength value of

J/m at room temperature, when tested in accordance with ASTM D256 and shall retain at least

70% of this value when subjected accelerated weathering for 1000hrs as per ASTM G155 or UL

746C.The logo of the manufacturer shall be embossed on either side of the body.The Median

Marker shall have rectangular-shaped, fluorescent yellow color retro-reflective sheeting of size

not less than 8.5cm*8.5cm and with fully reflective micro prismatic cube corners as its retro-

reflective elements and meeting ASTM D4956 type XI specifications.The retro-reflective

sheeting shall be one or both sides of the Median Marker and shall be edge protected with no

exposed edges which will prevent edge lifting, vandalism, sheeting damage, etc.The Median

Marker shall be fixed by a combination of epoxy adhesive and grouting.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

13 Cautionary Warning Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 50.000 No. 4049.77

4mm ACP (Aluminum composite Panel); Size as per below equilateral triangle as per design of

IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications;

3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab

for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective

sheeting For size 75 x75 x 75 cms

14 Cautionary Warning Sign (Without Post) :-Providing and fixing sign boards made out of 2mm 60.000 No. 3196.60

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 75x75x75 cms. equilateral

triangle as per design of IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised

with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; . The details of symbol foreach board shall be as per the instruction of

engineer in charge.The board shall be fixing on existing pole using MS U Clamp ( Min. 2 Clamp or

as required to proper fix) with necessary fixture,welding,labours,Transportation and fastnieng. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor with his own expensis.. (A) Class-C Type-11 Retro Reflective

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

15 Mandatory Warning Sign (Without Post):-Providing and fixing sign boards made out of 2mm 60.000 No. 3451.63

aluminium sheet / 4mm ACP (Aluminum composite Panel); size 60 cms. Diameter as per design

of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications;

. The details of symbol foreach board shall be as per instruction of engineer in charge.The board

shall be fixing on existing pole using MS U Clamp( Min. 2 Clamp or as required to proper fix)

including all necessary fixture, labours, transportation and fastnieng A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by

contractor with his own expensis. (A) Class-C Type-11 Retro Reflective sheeting

16 Regulatory / Mandatory Sign :-Providing and fixing sign boards made out of 2mm aluminium 35.000 No. 4618.73

sheet / 4mm ACP (Aluminum composite Panel); as size given below as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted

by contractor. (A) Class-C Type-11 Retro Reflective sheeting For size 60 cms Dia.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

17 STOP Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP 10.000 No. 7213.42

(Aluminum composite Panel); size 90 cms Octagone as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x

x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy coatings in black and white bends. The details of

symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

18 Hazard Marker Sign :-Providing and fixing sign boards made out of 2.0 mm aluminium sheet / 4 10.000 No. 3666.30

mm ACP (Aluminum composite Panel); size 90x30 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 1.8mtr long

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol foreach board shall be as per theinstruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted

by contractor. (A) Class-C Type-11 Retro Reflective sheeting

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

19 Tree Guard sign :-Providing & fixing sign board made out of 2mm aluminium sheet / 3mm ACP 300.000 No. 531.26

(Aluminum composite Panel) , size 30cms diameter circle, pretreated with phospheting process

and acid etching, painted with one coat of epoxy primer and two coats of best quality epoxy

paint reflectorised with retro reflective sheeting as per latest M.O.S.T. specifications. A warranty

for 10 years for the Retro reflective sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for the product offered shall be

submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

20 Kerb guard sign board (small) :-Providing & Fixing sign boards made out of 2mm aluminium 10.000 No. 7480.06

sheet, size 240 x 30 cms in U spape; as per the attached drawing pre treated with phospheting

process & acid etching. coated with one coat of epoxy priemr and two coats of best quality

epoxy paint reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per

ASTM D-4956 and latest M.O.S.T.Specifications; stand post and frame fabricated from iron angle

of 50x50x5mm, 10mm sq. bar as required, painted with best quality epoxy coating the fixing at

site shall be in 1:2:4 CC block of size 45 x 45x 60cms for each leg, including excavation curing

etc. complete under the supervision of engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

21 Facia Replacement for overhead signs: Sign board per Square Meter :-Providing and fixing sign 150.000 Sq.Mt. 9703.37

boards made out of 4mm ACP (Aluminum composite Panel); size as per design of IRC-67-

Pre treated with phospheting process & acid etching;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; for

each board shall be as per the instruction of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab as per IRC-67 clause with reflective sheet testing

to be done by contractor's own expanses for the product offered shall be submitted by

contractor including all necessary fixture, labours,lifting,machinary, transportation and fastening

etc complete as directed by Engineer incharge. (A) Class-C Type-11 Retro Reflective sheeting.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

22 Triple Chevron sign :-Providing and fixing board made out of 1.5mm aluminium sheet / 4mm 30.000 No. 15489.79

ACP (Aluminum composite Panel); size 230x60 cm as per design of IRC-67-2012. Pre treated

with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of

Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 2 Nos. of 3.3 mtr long stand

post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated from suitable

size iron angle of 50 x 50 x 5mm; painted with bestquality epoxy coatings in black and white

bends. the details of symbol or inscription / numerals for each board shall be as per the

instruction of engineer in charge.The fixing at site shall be in CC M 15 of size 45 x 45 x 60 Cms.

for each leg.including excavation, curing , all necessary fixture, labours, transportation and

fastening etc.complete under the supervision of engineer in charge. A warranty for 10 years for

the Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered shall be submitted by

contractor with his own expensis.. (A) Class-C Type-11 Retro Reflective sheeting.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

23 Place identification sign :-Providing and fixing 1800mm x 1200 mm (Double Sided) Retro- 10.000 No. 82146.45

Reflective type sign board of SS steel structure to be provided as per drawing and design given

by Engineer in charge. The road sign board steel to be provided as per drawing and design of

1800 mt in Height and 1200mm in Length fixed with 01 nos. of S.S. 304 pipe 114 mm outer dia.

Size 6 mm thick total 4.8mt. in length with a foundation CC of 0.60 x 0.60 x 1.0 mt. in M-

grade as per dimension given in drawing. The sign board face fully covered with Retro reflective

sheeting confirming to Type-XI of ASTM D-4956-09 The sign board face fully covered with Retro

reflective sheeting confirming to Type-XI of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick

Aluminum Composite Material (ACP), over which symbols and numerals are made using

Latex/UV Digital Printing Technology and over laminated with UV resistant Lamination Film as

recommended by sheeting manufacturer in approved color pasted on substrate by pressure

sensitive adhesive with suitable size of VHB Tape with outer back support frame of SS 304 grade

31.75 mm OD round pipe/ 1.2 mm th.and back support with SS rectangle pipe 25 x 12 x 1 mm as

per drawing by vertical support as per drawing mounted on SS pipe 114 mm OD (6mm thick).

Fixed with S.S. cleat 6 mm thick as per drawing etc. including all necessary fixture, labours, SS

polishing, transportation and foundation as per drawing and as directed by Engineer in charge.

A warranty for 10 years for the Retro reflective sheeting from originaa manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. The contractor should also submit SS Material test

report from NABL Laboratory. (A) Class-C Type-11 Retro Reflective sheeting

24 Solar Blinker:-Providing and replacing with new Solar Powered Traffic Blinkers LED based 70.000 No. 9595.00

300mm/200mmdia signal head with In built blinker unit haivng battery & battery charger unit

with photo electrics with complete as per technical specification clause 112 and as directed by

the Engineer; fixing on existing post including all material, labour, transportation and machinary

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

25 Arrow Sign Board for Road Name: Providing and fixing 1800x1200mm (Single Sided) Road Name 26.000 No. 35579.66

Retro-Reflective type sign board of steel structure to be provided as per drawing and design

given by Engineer in charge. The road sign board to be provided as per drawing and design of

1200mm in Height and 1800mm in Length ( Facia on Both Side) fixed with 02 nos. of S.S.

grade pipe 63 mm outer dia. Size 2.6 mm thick total 2 mt. in length (each pole) with a

foundation CC of 0.45 x 0.45 x 0.60 mt. in M- 15 grade fixed with VHB Tape of suitable grade as

per dimension given in drawing. The sign board face fully covered with Retro reflective sheeting

confirming to Type-XI of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick Aluminum Composite

Material (ACP), over which symbols and numerals are made using Latex/UV Digital Printing

Technology and over laminated with UV resistant Lamination Film as recommended by sheeting

manufacturer in approved color pasted on substrate by pressure sensitive adhesive with suitable

size of VHB Tape with outer support frame of SS square pipe 32 x32 x 1 mm or round 32mm dia

1.2 mm th. SS pipe and back support with SS rectangle pipe 25 x 12 x 1 mm as per drawing by

vertical support as per drawing mounted on SS pipe 73 mm outer dia (2.6mm thick). The SS pipe

should be have pipe covert at top as per approved design, Fixed with M.S. cleat 6 mm thick as

per drawing etc. including all necessary fixture, labours, transportation and fastening as per

drawing and as directed by Engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from originaa manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by contractor with his own

expensis.. (A) Class-C Type-11 Retro Reflective sheeting

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

26 Arrow Sign Board for Sector Names: Providing and fixing 600x1200mm ( 2Nos. arrow sign 43.000 No. 33095.91

plates) Retro-Reflective type sign board of steel structure to be provided as per drawing and

design given by Engineer in charge. The road sign board to be provided as per drawing and

design of 600mm in Height and 1200mm in Length (2 Nos.) arrow shape fixed with 02 nos. of

S.S. 304 grade pipe 50 mm outer dia. Size 2 mm thick total 4 mt. in length with a foundation CC

of 0.45 x 0.45 x 0.60 mt. in M- 15 grade fixed with VHB Tape of suitable grade as per dimension

given in drawing. The sign board face fully covered with Retro reflective sheeting confirming to

Type-XI of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick Aluminum Composite Material

(ACP), over which symbols and numerals are made using Latex/UV Digital Printing Technology

and over laminated with UV resistant Lamination Film as recommended by sheeting

manufacturer in approved color pasted on substrate by pressure sensitive adhesive with suitable

size of VHB Tape with back support frame of SS 304 grade rectangle pipe 25 x 12 x 1 mm as per

drawing by vertical support as per drawing mounted on SS 304 grade pipe 50 mm outer dia

(2mm thick). Fixed with M.S. cleat 6 mm thick as per drawing etc. including all necessary fixture,

labours, transportation and fastening as per drawing and as directed by Engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from originaa manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor with his own expensis. (A) Class-C Type-11 Retro Reflective

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

27 Rubber Flexible-Pole with Base (Traffic Guide Posts) Supply and installation of Rubber Flexible- 250.000 No. 2818.00

Pole with Base (Traffic Guide Posts) with a minimum one-year warranty, designed for road

safety applications. The Rubber Flexible Pole should be manufactured using high-quality blends

of natural and synthetic rubbers compounded with reinforcing fillers, UV-stabilised colours, and

specialised rubber chemicals to ensure durability, elasticity, and resistance to degradation. The

material composition must be verified through chemical analysis as a blend of rubbers, fillers,

and chemicals per ASTM D 3677-2010. The poles shall feature three Type VIII retroreflective

tapes, each with a minimum height of 50 mm, conforming to AIS-090:2005 for enhanced

daytime and nighttime visibility with multi-angle reflection. UV-stabilised Orange Red colour;

strong/flexible with self-recovery; height 800 ±2 mm; base dia. 220 ±2 mm; stem bottom dia.

±2 mm; stem top dia. 67 ±2 mm; reflector width 51 ±1 mm and weight 2.7 ±5% kg.Base and

stem shall be tested for tensile strength and elongation at break per ASTM D 412-98a or IS

Pt1:2021; hardness per ASTM D 2240-03/-2015.Ageing resistance (70°C/72 hr) tested per IS

3400 Pt4:2003 and ASTM D 2240-2015. Flex resistance tested per ASTM D 813-07 or IS

Pt4:2003 (De Mattia method), ensuring resistance to repeated flexing without cracking. All

testing and validation should be done at a NABL-accredited facility such as The Rubber Research

Institute of India (RRII). Bidders should submit certified test reports demonstrating compliance

with or exceeding the specified values. Non-compliant products will be disqualified.The supplier

should provide the supply, installation, and fixation using appropriate anchoring for stability on

various surfaces. The one-year warranty should cover defects in material, workmanship, and

performance under normal usage, including vehicular runover resistance.

28 Providing and fixing Chain link 2 10 x 10 gauge with 1.50m. high MS Post Pipe 50 x 50 x 3 mm, 216.000 Sq.Mt. 1930.96

frame of MS angle in size of 30 x 30 x 3 mm, MS flat patti for support 25 x 3 mm and post fixing

in Foundation concrete with grade 1:2:4 in size of 0.3 x 0.3 x 0.3 m. including one coat primer &

two coat paint with oil paint including all material , labour , fixtures and transportation etc

complete as per direction by Engineer in charge.

29 Painting one coats (excluding priming coat) on previously painted steel and other metal surface 70504.800 Sq.Mt. 46.44

with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

30 Extra one coat enamel paint over item for every subsequent coat of paint. 70504.800 Sq.Mt. 46.10

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

31 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position 150.000 Kg. 88.38

and applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

32 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful 270.000 Cu.Mt. 255.56

materials and disposing off the excavated stuff upto all meter lead.(B) Dense or Hard soil

33 Brick work using common burnt clay building bricks having crushing strength not less than 35 40.500 Cu.Mt. 4244.85

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

34 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick 370.000 Sq.Mt. 185.41

walls for interior plastering upto floor two level and finished even and smooth in (i) Cement

mortar 1:3 (1-cement:3-sand)

35 Providing & cutting the road side shoulders / median grass and light plant vegetations 213428.000 Sq.Mt. 5.40

trimming by using manually or mechanically including disposal of unserviceable material,

labour charges as directed By Engineer incharge with all lead & lift etc. complete.

36 Engaging labour for Cleaning of vegetation in paver block surface or any other hard sarfaces in 163346.000 Sq.Mt. 5.98

formation width of road including all required labours, cleaning materials , equipments,

transportation with all lead and lift with throwing the stuff and cleaning all surfaces as directed

by engineer in charge.

37 Applying White Wash and Geru to trees ( 1.5mt high, 0.60mt lime and 0.90 mt Geru) in two 25000.000 No. 42.79

coats as and where directed incl. all cost of materials and labour charges in the work

etc.complete as per given drawing and directed by In charge.

38 Removing existing pre cast concrete interlocking block and reuse the same by refixing including 11136.080 Sq.Mt. 374.57

35mm Sand layer for levelling and filling the joint with sand inproper line and level as per IRC SP

63-2018 etc complete.

39 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick 27388.310 Sq.Mt. 706.90

with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc.

40 Demolition and disposal of unserviceable materials with all lead and lift.(i) Unreinforced 744.400 Cu.Mt. 639.72

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

41 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm 16542.200 Rmt. 397.53

length,30cm height and 15cm thick of M200 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

42 Demolition of Brick work and stone masonry including stacking of serviceable materilas and 101.250 Cu.Mt. 577.92

disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

43 Supplying and fixing new SFRC (Steel fibre reinforced Concrete) M.H. Jali/Cover with frame of 40.000 No. 6565.00

Min. HD 30 MT load capacity as per IS-12592 Part-1 & 2. Quality and the size of frame and cover

/Jali is mensioned below including dismentalling od damaged cover and fixing new cover with

frame with loading ,unloading etc complete as per instruction given by Engineer in charge. (A)

For Storm water Manhole. Frame 42" x 42" inch and cover 36" x 36".

44 Proviidng and laying W.B.M. of M.C. metal of size 45 mm to 63 mm size including 20% Gritt 350.000 Cu.Mt. 2941.24

{Stone scrinning} & stone dust as filler including spreading, watering & consolidaion by vibratory

roller 80KN to 100KN static weight.

45 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam 350.000 Cu.Mt. 1688.93

specification including premixing the Material with water at OMC in mechanical mix plant

carriage of mixed Material by tipper to site, laying in uniform layers in sub- base / base course

on well prepared surface and compacting with vibratory roller to achieve the desired density.

46 Cold milling of existing bituminous layers, excavated material hauling and stock piling the 3409.200 Cu.Mt. 746.43

material as directed by Engineer incharge with disposing it with all lead & lift, transporting,

material & labour.

47 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with collars for culverts 120.000 Rmt. 1095.18

including setting and joining the pipes in C.M. 1:2 watering and laying (To level of slops of I.S.

458 / 1971 Class NP3 casted by vertically vibrated technology of following internal diameter.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

48 Providing and Laying of parabolic shaped tranverse rumble bar marking using Two Component 150.000 Sq.Mt. 5887.29

Cold Plastic road marking material in single monolithic application to create rumble strip raised

section 10 mm high of 200mm wide. Complete marking shall be 300 mm wide including 50mm

flanges on each side of 2.5mm thickness and applied spaced about 1 meter centre to centre of

roughly 6 numbers at one location, across the entire carriageway. Each rumble marking shall be

made complete with drop on reflective glass beads of Ri >1.6 @ 250 gm / sqm spread

throughout the surface of marking. The finished surface shall be levelled, uniform , free from

straks and holes including surface cleaning and cost of all materials etc. complete. As per IRC

these rumble strips shall be applied as traffic calming measure.Application of specialised cold

plastic road marking primer mandatory for Concrete / worn off bituminous surface.Performance

certificate of 3 years shall be provided from reputed laboratories viz: CRRI / ARAI etc.3 year

Warranty Certificate required from OEM.

49A School Zone Signage: Providing and fixing of 1 set of School Zone signages comprising of as given 12.000 No. 29629.34

below Made from Retro-Reflective type made of steel structure to be provided as per drawing

and design given by Engineer in charge. Each signage to be fixed on Single or Double S.S.

grade pipe 63 mm OD Size /2 mm thick with a foundation with CC of 0.45 x 0.45 x 0.60 mt. in M-

15 grade for each post & fixed with VHB Tape of suitable grade as per dimension given in

drawing. The sign board face fully covered with Retro reflective sheeting confirming to Type-XI

of ASTM D-4956-09 and IRC 67-2022, on 4 mm thick Alluminum Composite Material (ACP), over

which symbols and numerals are made using Latex/UV Digital Printing Technology and over

laminated with UV resistant Lamination Film as recommended by sheeting manufacturer in

approved color pasted on substrate by pressure sensitive adhesive with suitable size of VHB

Tape with outer frame of SS 304 grade pipe and SS 304 grade support rectangle pipe frame

32x32 x 1 mm as per drawing by vertical support as per drawing mounted on SS pipe 63 mm OD

(2 mm thick)/114 OD 3mm thick as required. Fixed with S.S. cleat 6 mm thick as per drawing etc.

including all necessary fixture,materials, labours, machineries, SS polishing, transportation and

fastening etc. complete as per drawing and as directed by Engineer in charge. A warranty for

years for the Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year

outdoor exposure test report from third party test lab for the product offered shall be submitted

by contractor with his own expensis. (A) Class-C Type-11 Retro Reflective sheeting

(A) For size 900x1500mm

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

49B (B) Facility Information sign 600x800 mm 12.000 No. 11792.29

49C (C) School Zone End sign 600x800 mm 12.000 No. 11792.29

50 Providing and fixing Chain link 2 10x10 jali on existing post with all necessary fixtures including 1850.000 Sq.Mt. 237.35

removing damaged jali & all required labour, material, transportation, machinary and lifting etc.

finishing complete as directed by engineer in charge.

51 Lane Discipline Sign Board :-Providing and fixing sign boards made out of 2mm aluminium sheet 10.000 No. 14085.46

/ 4mm ACP (Aluminum composite Panel); size 150x90 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr long

(2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol foreach board shall be as per theinstruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered

shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

52 Providing and fixing retro Reflective Prismatic grade Board using 2mm Aluminum / 4mm ACP, 100.000 Sq.Mt. 8457.30

carrying retro reflactive process by screen painting or overlay film as required etc. complete

including transporting and fixing on the existing frame or plain surface with Rivetting or VHB

Tape, the distance between 2 rivets should not exceed 300mm, complete as per I.R.C 67-2012

design. A warranty for 10 years for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class -C Type-11 retro reflective sheeting

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

53 Solar Triple Chevron sign :-Providing and fixing Solar Triple Chevron sign board made of 26.000 No. 20200.36

reflective and illuminated directional arrow panel used to indicate turns, curves or bends. The

sign should use active solar panels to power high intensity LED lights, improving visibility during

day and night time. The sign should made from of 1.5mm GI / aluminium sheet ; size 150x60

cm, reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-

4956 and latest M.O.S.T.Specifications; 2 Nos. of 3.2 mtr long stand post of 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame fabricated from suitable size iron angle of

25x25x3mm; painted with bestquality epoxy coatings in black and white bends. the details of

symbol or inscription / numerals for each board shall be as per the instruction of engineer in

charge.The fixing at site shall be in CC M 15 of size 45 x 45 x 60 Cms. for each leg.including

excavation, curing , all necessary fixture, labours, transportation and fastening etc.complete

under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from originaa manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab and 2 year solar product warranty for the product offered shall be

submitted by contractor with his own expensis.. (A) Class-C Type-11 Retro Reflective sheeting.

54 Supply and Fixing of Reflective Arrow around the circle / round about, made from tough 200.000 Each 1580.36

synthetic rubber EPDM, size 1000x400x8mm in black color, having 3 chevrons made from Type-

8 Retro Reflective sheeting of Yellow Color with appx. Weight of one piece min. 4kgs. The fixing

of the Guard is with epoxy and Screwing to the Concrete wall of the Roundabout complete with

all tools and tackles and directed by Engineer-in-chrage

55 Hire Charges for cleaning and grubbing black topped surface with truck mounted mechanical 500000.000 Sq.Mt. 3.23

brooms vaccume machine at kerb edge and PSS edge of road in up or down lane including driver

and one cleaner with Pawada, dust bin etc. complete as directed by engineer in charge.

56 Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and 1000.000 Rmt. 143.42

bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade

foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone

laid with kerb laying machine, foundation concrete laid manually, all complete as per clause

408) using concrete batching mixing plant (ii) PCC M20 for Kerb (Cast in Situ) for small project

57 Providing and applying Prime coat with Emulsion RS-1 on prepared surface including clearing 33750.000 Sq.Mt. 73.96

the road surface and spraying with mechanical sprayer at the rate of 7.50 Kg. / 10 Sq.Mt with all

machinary and labour as directed by incharge.

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

58 Providing and laying asphalt painting on BT surface with bitumen grade VG-30 at the rate of 5 Kg 124900.000 Sq.Mt. 77.58

/10 Sqm. By mechanical sprayer and spreading the stone dust on prepared surface at the rate of

0.03 Cum. / 10 Sqm. etc. complete and rolling with roller and brushing etc. complete.

59 Providing and laying 30 mm thick Bituminous concrete on existing bituminous surface with 12017.590 M.T. 5670.96

Bitumen Grade VG-30 (60/70) for tack coat at the rate of 2.5kg/10 smt with Mechanical / Hand

Sprayer and using specification graded machine crushed with 5.5 % bitumen VG-30 grade

(60/70) by Wt. of total mix as per specification MORTH including mixing of asphalt with B.T.

chips in continuous batching drum mix/Batch Mix plant transporting same as by paver finisher

and consolidation the same with pair of 8 tonnes to 10 tonnes vibratory roller toachieve desire

density and including VG-30 grade bitumen, cost of required Cleanning Existing Surface and

Desposing as Direction of Engineer InCharge ,tools , plants, all machineries, equipment fire

wood , oil, kerosene, charges etc. complete.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned above. Amount of

my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

Sr. Description of Item (with brief specification and reference to book of Quantity Unit Rate in Amount

No. specifications) Figure

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Capital Project Sub Division No. 26 Capital Project Division No.

Gandhinagar Gandhinagar