TENDER FOR THE MISCELLANEOUS CIVIL WORKS EXPANSION OF BAKERY AND CONFECTIONERY UNIT CHALAKKUDY THRISSUR DIST

CONCRETE WORK:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

FLOORING WORK:- Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

STEEL WORK:- Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer and two coat of epoxy paint, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

FINISHING WORK:- 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

WOOD WORK:- Providing and fixing 19 MM thick good quality plywood,to the MS frame work with C.P. brass / stainless steel screws etc. (frame work to be paid seperately)complete as per architectural drawings and directions of Engineer - in- Charge.

ALUMINIUM WORKS:-Providing and fixing aluminium composite panel ceiling and fascia using aluminium extruded architectural sections of size 25.4x25.4x1.2mm(0.308kg/m) to form grids of size 600x600mm and fixing 3mm thick FR grade aluminum composite panel (0.25mm aluminium coil thickness) of approved make and colour to the frame work using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant etc. The basic frame work shall be propoerly hung/fixed on the existing roof structurals using aluminium extruded angles/square tubes at proper intervals.

Providing and fixing panelled side hung doors made of powder coated aluminium extruded architectural sections of 45mm wide frames for shutter having wall thickness of 1.8 ± 0.1 mm and appropriate outer frames with 8mm thick Thomoson multiwood panel at bottom and 6mm thick approved glass at top including handle, EPDM gasket, screws, fastners, pivots, hinges, lock & key, door stopper etc. as per the drawing and specifications.

PLUMBING WORKS:-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work 100 mm nominal inner dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes

DEMOLITION WORKS:- Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

M K Udayakumar

ABDUL AZEEZ EK

Suresh

R. Sajikumar

M K Udayakumar

Linto Manuel

R. Sajikumar

Suresh