Special repair by providing 30mm thick BC on existing roads in the campus of Mini sectt. at Sonipat Distt. Re-invite

Amount

Filling of 50mm thick compacted stone metal Built-Up-Spray Grout (BUSG) patches as per PWD specificatin.

Providing and laying tack coat with bitumen VG-10 grade pressure distributor at the rate of 0.30 kg. per sqm. On the prepared bitumen/granular surface cleaned with mechanical broom including cost of bitumen as per clause No.503 (5th edition) 2013 as per MoRT&H specification (N.S.)

Providing & Laying 30 mm thick compacted Bituminous Concrete (BC) in one layer with 100-120 TPH batch type hot mix plant prodcing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 minimum @ 5.40 per cent of mix and filler tranposrting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibrator and tandem rollers to achieve the desired compaction as per MoRT&H specification for road and beidge works (4th Revision) of 2001/latest edition and as directed by the Engineer-in-Charge.

Providing and fixing public information board consisting of 75 mm GI pipe of size 2.45 m.X 1.15 m with 900 mm X 900 mm GI sheet16 gauge connected/welded with 5 mm thick steel plate of 50mm duly painted as per column mentined in the drawing and fixing at site in 60x60x75 cm cement concrete 1:2:4 block complete in all respect.

Providing & Marking center line / side line 2.5mm thick (minimum) with hot applied thermo-plastic road marking paint 10 cms wide/ 15cm wide complete in all respect such as furnishing all labour, materials, tolls equipments including all incidental costs necessary for carrying out in work at site confirming to the technical specification as clause No. 803 of MORT&H specification for road and bridge works (5th revision) of 2013/ Latest edition. Each container of the thermoplastic material shall have the name trademark or other means of identification of manufacturer, batch number, date of manufacture color maximum application temperature and maximum heating temperature. The thermoplastic paint material shall be of Asian Paint-Apcomark/Berger-Sigmarc/Prismo. The glass beads shall be of Potters/ Sovitec/ Fleolite. The thermoplastic material shall be sampled and tested in accordance with appropriate ASTM/BS method. The contractor shall furnish to the Engineer-in-Charge a copy of certified test reports from the manufacturer of the thermoplastic material meet all requirement of the specifications. The reflector zing glass beads shall meet the requirement of clause 803.4.2 and test methods mentioned in clause 803.4.2.4 shall be meticulously followed. The minimum thickness specified is exclusive of surface of glass beads the method of thickness measurement shall be in accordance with appendix B and C of BS:3262 (part-3). Note: - Before start of work the contractor shall give brand, batch number, manufacturing date of the material to be used along with a photocopy of bill duly signed by the contractor and get approved the same from Engineer-In-Charge before use.