Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹13.3 LAccepted-AOC | L2 | Accepted-AOC found statisfactory | |
| 2 | LI₹12.7 LAccepted-AOC | LI | Accepted-AOC found statisfactory |
| Sl No | Description | Qty | Unit | LORANCE A J L1 | Martin A A L2 |
|---|---|---|---|---|---|
| 1.00Maintenance of Road | |||||
| 1.00 | 75.5.5.A.1pb:Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. | 296.96 | sqm | 283.8 ₹84,278.1 Lowest | 297.99 ₹88,492 |
| 1.00 | 75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. | 160.17 | sqm | 368.41 ₹59,009.33 Lowest | 386.83 ₹61,959.72 |
| 1.00 | 75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 2,274 | sqm | 14.46 ₹32,882.04 Lowest | 15.18 ₹34,519.32 |
| 1.00 | 75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65) | 2,274 | sqm | 257.29 ₹5,85,077.46 Lowest | 270.15 ₹6,14,321.1 |
| 1.00 | OD398114/2024-2025:od1278785/2021_2022 :Sectioning up to 150mm and forming the surface for OLD road way
levelling, cambering etc complete as per direction of Engineer in charge | 134.4 | per sqm | 25.31 ₹3,401.66 Lowest | 26.58 ₹3,572.35 |
| 1.01 | OD398115/2024-2025:od1699322/2021_2022 :Providing Plain cement concrete for road work exclusive of form work CC 1:2:4 (1
cement:2 fine aggregate: 4 course aggregate) laid to required slope and camber in panels@3mc/c as
required inculding compaction using needle vibrator finishing and tamping etc,complete. max. size of course
aggregate not exceeding25mm,mixed in concrete mixer etc. complete.as per specification (i) Nominal
mix(1:2:4) modified75.8.1 | 20.16 | cum | 7,986.77 ₹1,61,013.28 Lowest | 8,386.11 ₹1,69,063.98 |
| 1.01 | 11.4.2.2:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br>II. P.C.C grade M 15 <br> (ii) Nominal mix 1:2.5:5 (Hand mixing) | 0.5 | cum | 7,911.85 ₹3,955.93 Lowest | 8,307.44 ₹4,153.72 |
| 1.01 | OD419529/2024-2025:od1604780/2021_2022 :MOdified10.25.2Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 2,184 | kg | 149.56 ₹3,26,639.04 Lowest | 157.04 ₹3,42,975.36 |
| 1.01 | OD445155/2024-2025:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years
warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed
over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with
area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and
supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by
means of properly designed foundation with M 15 grade cement concrete min size 40 cm x 40
cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of
epoxy painting over epoxy primer and as per approved drawing and clause 801 including
lettering symbols etc. (Derived from MoRTH spec 8.5) | 0.9 | sqm | 12,039.21 ₹10,835.29 Lowest | 12,641.17 ₹11,377.05 |
Tender Value
₹12.7 L
EMD Value
₹31,677
Closing Date
25 Feb 2025, 2:00 pmClosed
ASSISTANT ENGINNEER
Office of the Assistant Engineer LID EW Section Malayattoor Neeleeswaram GP
LRRP 2024 25 ANGAMALY LAC SL NO 0882 YMA MANTHRIMOOLA LINK ROAD MAINTENANCE MALAYATTOOR NEELESWARAM GP ERANAKULAM DISTRICT ward 16 General Civil Work 25
2025_LSGD_739523_2
5 AE LSGD MNGP 24 25
Open Tender
Civil Works - Buildings
Item Rate
270 days
Office of the Assistant Engineer LID EW Section
Prefer e tender details
7 documents required · 7 mandatory
₹2,760
Yes
₹31,677
Yes
23 Sept 2025
18 Feb 2025
26 Feb 2025
18 Feb 2025
25 Feb 2025
18 Feb 2025
Amount
Maintenance of Road
75.5.5.A.1pb:Modified Penetration Macadam 50 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
75.5.5.B.2pb:Modified Penetration Macadam 75 mm thick using Bitumen S-65 - Packed Bitumen Rates Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.
75.5.2.1pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)
OD398114/2024-2025:od1278785/2021_2022 :Sectioning up to 150mm and forming the surface for OLD road way levelling, cambering etc complete as per direction of Engineer in charge
OD398115/2024-2025:od1699322/2021_2022 :Providing Plain cement concrete for road work exclusive of form work CC 1:2:4 (1 cement:2 fine aggregate: 4 course aggregate) laid to required slope and camber in panels@3mc/c as required inculding compaction using needle vibrator finishing and tamping etc,complete. max. size of course aggregate not exceeding25mm,mixed in concrete mixer etc. complete.as per specification (i) Nominal mix(1:2:4) modified75.8.1
11.4.2.2:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203<br>II. P.C.C grade M 15 <br> (ii) Nominal mix 1:2.5:5 (Hand mixing)
OD419529/2024-2025:od1604780/2021_2022 :MOdified10.25.2Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
OD445155/2024-2025:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 40 cm x 40 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. (Derived from MoRTH spec 8.5)
Martin A A (BID ID -2125416)
Bidder Name
LORANCE A J
Martin A A
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .