Building

Name of Work:- Construction of Nandghar (Anganvadi) Building at Raniya Village Raniya

(Thasra-2), Ta: Thasra, Dist:Kheda

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

1 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 50.10 Cum 117.07

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and

2 stacking of useful materials and disposing off the excavated stuffupto 50 Meter lead.(B) 6.90 Cum 162.37

Dense or Hard soil

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4-

3 graded stone aggregates 20 mm nominal size) and curing complete Including cost of 10.40 Cum 3917.35

formwork and reinforcement for reinforced concrete work in (A) For PCC

Providing and laying Ordinary cement concrete work 1:1.5:3 (1- Cement : 1.5- Coarse

sand : 3- graded stone aggregates 20 mm nominal size) and curing complete Including

cost of formwork and reinforcement for reinforced concrete work in (A) footings

Brick work using common burnt clay building bricks having crushing strength not less

5 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine 9.20 Cum 4021.02

sand) (B) Conventional

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3-

graded stone aggregates 20 mm nominal size) and finishing smooth with,curing

6 etc.complete including the cost of formwork but excluding the cost of reinforcement for 10.70 Cum 8040.53

R.C.C work in (A) BEAMS :(ii) Having cross-sectional area more than 0.08Sq.M and upto

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3-

graded stone aggregates 20 mm nominal size) for R.C.C lintel including finishing smooth

with,curing etc. complete including the cost of formwork but excluding the cost of

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement : 1.5- Coarse sand : 3-

graded stone aggregates 20 mm nominal size) for reinforced concrete Chhajjas not

exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces

with cement mortar 1:3 (1- cement, 3 Fine sand) to give a smooth and even surface

centering and formwork and curing complete excluding cost of reinforcement.

Providing and laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3-

graded stone aggregates 20 mm nominal size) and finishing smooth with,curing etc.

9 complete including the cost of formwork but excluding the cost of reinforcement for 5.20 Cum 9062.91

R.C.C work in (B) COLUMNS: (ii) Having cross-sectional area more than 0.08 Sq.M and

Providing and Laying ordinary cement concrete 1:1.5:3 (1- Cement 1.5- coarse sand : 3-

graded stone aggregates 20 mm nominal size) and finishing smooth with curing etc.

10 complete including the cost of formwork but excluding the cost of reinforsement for 6.50 Cum 7258.19

R.C.C work in (iii) Slabs having more than 10 cm and upto 13 cm. thickness

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

11 foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited 36.80 Cum 130.39

layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete.

Filling in plinth with sand under floors including watering ramming, consolidating and

dressing complete

Providing and laying ordinary C.C. M-200 (C.C. 1:1.5:3 - 1 cement, 1.5 coarse snad,

graded stone agggregate of 20 mm nominal size) and curing complete including the cost

of formwork and excluding the cost of reinforcement for reinforced concrete work for

horizontal and vertical R.C.C. fins.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding

and placing in position complete upto floor two level

Brick work using common burnt clay building bricks having crushing strength not less

16 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine 14.00 Cum 4289.32

sand) (B) Conventional For GF

Half brick masonry in common brunt clay building bricks having crushing strength not

less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3- coarse sand ) with 2 Nos of

6mm Mild steel round bars after every three course embedded in Cement Mortar in

foundation and plinth (B) Conventional

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

18 adhesive material including dismentaling of existing flooring and jointed with color 47.20 Sqm 1248.74

cement slurry including finised with flush pointing & cleaning the surface etc. complete

for light shade

Item Description Quantities Unit Item Rates Amount

Providing and laying Ceramic tiles 8mm thick in flooring treads of steps and landing laid

19 on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with 51.10 Sqm 949.68

flush pointing in white cement including Dedo.

Providing and laying white glazed tiles 8mm thick in flooring treads of steps and

20 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) 9.10 Sqm 908.32

finishing with flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base

of cement mortar 1:6 (1-cement : 6- coarse sand) or L.M. 1.1.5 laid over and jointed

with grey cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying Black or Colour Machine Cut free edges, Machine polished Granite

Stone slab 18 mm thick single piece For Stair, Step, Landing, Skirting etc as per design

including fully moulded round front edge and 1cm nosing and necessary groove on

22 trade of steps laid on 20 mm thick cement mortar 1:6 (1-cement : 6 coarse sand) 11.90 Sqm 2942.91

jointed with grey cement slurry including rubbing, polishing & Finishing etc complete

as directed by Enginner in Charge.(Sill-Jems & Cupboard)

Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top and

mm thick Kota stone slab flooring fitting at bottom with cementing Materials / adhsives

including macking necessary grooves in walls with Vertical Kotastone 30 mm x 2 No

23 sandwitch thick every 60 cm centre to cenre including all labour material of approved 2.00 Sqm 3089.46

quality incl. full moulded round front edge fixed in wall for partition and jointed with

grey cement slurry including rubbing and polishing etc. complete .

Providing and Fixing Windows with 40 X 40 X 5 mm. iron angle & frame 30 X 30 X 4 mm.

size in Double Shutter with 1 mm thick MS plate with hold fasts, iron hinges, handles,

24 stopper, locking arrangement etc. comp. Steel welded is built up section cutting 12.20 Sqm 3963.64

hoisting, finishing in two coats of oil painting over coat of prime coat etc. complete.

Providing and Fixing 32mm thick decorative flush Door shutter (Shutter fixing to Stone

frame) of approved quality and design consisting of both side 1.00 mm thick texture

25 laminated flush door in single piece, all edges shall be covered with teak wood beading 4.00 Sqm 4001.62

incl. required fitting and fixtures of S.S.,cylindrical lock system with all labour, tools

materials as directed by Engineer-In-Charge.

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER

consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x

19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a

coat of steel primers of approved make and manufacture, M.S. frame shall be covered

with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm forming stiles, and

5mm thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side,

26 and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and 1.60 Sqm 1146.37

bottom rail, Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet

beading on eighter side, and joined together with solvent cement adhesive,. An

additional 5mm thick PVC strip of 20mm width is to be stculk on the interior side of the

‘c’ channel using PVC solvent cement adhesive etc. complete as per direction of

Engineer in charge, manufacture’s specification and drawing.

Providing 20mm thick sand faced cement plaster on walls upto height 10 metres above

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and

8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) including scaffolding curing etc.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

28 half brick walls for interior plastering upto floor two level and finished even and 130.00 Sqm 194.07

smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)

29 to give an required shape even shade after thoroughly brushing the surface to remove 126.40 Sqm 114.53

all dirt, and remains of loose powdered materials.etc complete

Applying two coats of acrylic laphy (putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including thoroughly

30 brushing the surface free from mortar dropping and other foreign matter and sand 129.50 Sqm 40.59

papered smooth as per instruction of Engineer in charge & approved make.

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.smooth.

Painting (Bala Painting) undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth. on walls shade and pattern as directed by Architect and

Item Description Quantities Unit Item Rates Amount

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

33 on the wall with the help of clamp at every two metre C/C or shall be concealed as 30.00 Rmt 72.65

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

34 on the wall with the help of clamp at every two metre C/C or shall be concealed as 39.00 Rmt 91.84

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

35 on the wall with the help of clamp at every two metre C/C or shall be concealed as 18.00 Rmt 195.67

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

36 on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm 18.70 Rmt 835.14

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

Provision and fixing water closet squatting orissa type W.c. pan size 580mm integral

footrest and 100 mm P or S trap and in cluding 25 mm dia CP brass flush valve and GI

37 inle connection etc. comp. (A) Vitreous china long pattern white or color. 1.00 Each 1387.03

Providing and fixing wash basin with pedestal of std. Height with single hole for pillar

tap with C.I or M.S brackets painted white including cutting holes and making goods the

38 same including. C.P. brass waste Couplin, and waste pipes and bottel trap (A) Vitreous 1.00 Each 1817.65

china. (ll) Flat back washbasin 550 mm x 400 mm size (1) in colour

Providing and fixing Gun metal check or non return fullway wheel valve.(A) 15mm dia.

40 Providing and fixing in position cowel went to pipes.(C) 100mm dia 2.00 Each 501.87

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia.

Construction of Septic Tank (1.5m x 1.5m x 1.5m) using hollow brick masonary wall,

covering with preast RCC slab including jointing the slabs with pointing and providing

110 diametre U.P.V.C (Type B) Connecting the line upto Manhole etc. complete

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with

44 jali of the following nominal diameter of self cleansing design with C.I scread down or 2.00 Each 558.36

hinged grating including the cost of cutting and making good the walls.

Providing & Fixing S.W. Gully trap with C.I. Greating brick masonay chamber and water

45 tight C..I Cover with frame of 300 mm X 300 mm Size ( Indian ) with standard weight (i) 2.00 Each 1246.92

Square mouth traps (C) 150 mm x100 mm size P or R Type.

Providing erecting and fixing double coated ISI water tank of required capacity each

with all necessary fittings and connection etc. complete on terrace.

Providing and fixing SS Sink Glosy ASIS 304 Grade x 1mm thick with over all size 610 x

460 mm & bowl size 560 x 410 x 200 with single hole for pillar tap Fixing in sanwich

47 platform including cutting holes and making goods the same, 15 mm dia pillar tap. Stop 1.00 No 3158.03

cock 15 mm dia, necessary fixtures, connections and waste pipes etc complete.

Providing , Painting ,Lettering Nandghar Logo Board As Pe Design Specified And

48 Providing Two Direction Side Of the Building Photograph Copies -4 Of Each In Postcard 1.00 Each 1515.00

size og the Completed Work As Directed 23Cm x 45 Cm.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

49 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 2.00 Each 2932.93

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

Item Description Quantities Unit Item Rates Amount

Providing and Fixing FIRE EXTINGUISHER 6 KG ABC including cost of labour complete

50 with providing 1 year guarantee for each bottle including testing and comissioning. 2.00 No 2550.25

Providing and fixing M.S. grills/ Railing /MS ladder of required pattern to M.S.

frames of windows ,Door , Jali etc. with M.S. flats at required spacings and frame

51 alround, square or round Bright bars of 12mm dia, with round headed bolts and 525.30 Kg 104.95

nuts or by screws including all Fixture etc complete as directed by Engineer in charge

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden

52 box, single mounting base frame covered with textured/metallic/white front plate 10.00 Point 465.61

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe

and accessories erected oncealed in wall/ceiling complete Cat- II

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with earth continuity of

53 following type erected on PVC / Metallic/Wooden box, single mounting base frame 4.00 Point 654.48

covered with textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

completeCat- II

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessories Cat- II

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type switch & 5 pin Plug erected

on PVC / Metallic/Wooden box covered with appropriate front plate modules erected

on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A

Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Belowdescription have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacitybetween the ranges shown.) (A) Tube Light with integral driver (iii) 18-

20 Watts, Surge - 2KV,IP-20, conventional 4 feet cat-II

Providing & erecting open well type horizontal mono block pump set with stainless

steel body having following specification (A) 0.5 H.P. single phase open well motor

pump set having discharge of 115 LPM @ 15 mtr. head suitable for 32 mm dia.delivery

pipe with control panel

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

58 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 1.00 No 91.91

existing box. confirming to IS 8828/1996 with ISI Mark Cat-ll

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having

59 10 KA breaking capacity & confirms to IS : 8828 in existing box having following 1.00 No 278.76

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43) (iv)

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Item Description Quantities Unit Item Rates Amount

Providing and Erecting following Shock Proof Tissino Type accessories erected on

62 mm thick PC (Polycarbonate) Sheet in PVC / Metal Box erected on Wall / Ceiling. (14) 2.00 No 219.17

Electronic Hum Free EME Socket Type Step Fan Regulator.

Supplying Erecting Aproved make Bracket Fan of ISI Mark with 230 Volt A.C., 50 Cy/S

63 400/450 mm Sweep complete on Wall or With lead cores and connections complete. 1.00 No 2105.85

(Make shall be Approved by Engineer in Charge)Category II.

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I.

pipe with necessary coupling buch buried in specially prepared earth pit & G.I. earth

wire of 8 SWG erected & connected as directed. For using salt and charcoal / coke as

required for pipe type earthing

Mains with 1.1 KV FRLS PVC insulated ISI Marked Standard Copper Conductor wire in

following Type of Pipe to be erected Concealed in / Flushed on Wall / Ceiling with

65 Sq.mm Copper Conductor FRLS PVC Insulated Standered wire of Green Colour for Earth 30.00 Rmt 62.62

continuity of following size. (A) With Medium Class Rigid PVC Pipe and Accessories. (a)

2 wire 1.5 Sq.mm.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted

66 on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass 1.00 No 833.73

screws and washers.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and

67 as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for 3.60 Sqm 686.90

levelling and filling the joint with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete

Providing and Placing IT wood writing table having size 1.50 X 0.75 X 0.75 mt with one

side drawer with using of 19mm thick WP wood, top cover with 1 mm thick wood type

Formica including using of all necessary material & labour etc completed as directed by

Engineer incharge

Providing and Fixing pin cushion display board having size 1.20 X 0.75 mt including

69 using of alluminum section frame, 18mm thick WB plywood, nevy blue Cushion cloth 1.00 No 808.00

pin etc completed as directed by Engineer Incharge.

Providing and fixing of hook of 10mm or 12mm dia including drilling hole, fixing of male-

70 female thrade fastner sealing the same with appoxy compound, finishing the same etc 1.00 No 303.00

complete as directed by Engineer incharge.

Providing and fixing medical device & equipment standio meter height measuring scale

71 2.10mt long including fixing in wall with using of all heavy SS screw, rail etc complete as 1.00 No 1414.00

directed by Engineer incharge.

Providing and fixing Pre writing board having size 30cm X 20cm with decorative acralic

border etc completed as directed by Engineer incharge.

Providing and supplying standard PVC (Polyvinyl chloride) Chair with handle of

approved design and make as directed by Engineer incharge.

Providing and supplying standard PVC (Polyvinyl chloride) Stool having size 3.75 X

X 0.45mtr of approved make as directed by Engineer incharge.

Supplying & erecting approved LED TV 32Inch ,230V,Resolution: 4K Ultra HD (3840 x

2160) | Refresh Rate: 60 hertz,1 TV Unit, 1 Remote, 2 Table Stand, 1 User Manual,

Batteries,1 Warranty Card Connectivity Technology Wi-Fi, USB, Ethernet, HD

Connectivity: 3 HDMI ports to connect set top box (1HDMI port eARC supported) |

USB ports to connect hard drives and other USB devices | Built- in WiFi | Bluetooth |

Ethernet RJ45 | 1 earphone Jack | 1 Optical digital audio output (SPDIF) | 1 RF- Radio

frequency input | 1 AV input Sound: 24W Audio Output | Dobly Atmos | Audio equalizer

| Dolby Digital | Lip-sync adjustment | Sound mode:Standard, Theatre, Sports, Music,

Speech, Late Night Smart TV Features: Google TV | Google Assistant | Voice command |

Screen mirroring: DLNA, Chromecast, Miracast, AirPlay | Sleep Timer | On/Off Timer |

Supported Apps: Netflix, YouTube, Prime Video, Hotstar, SonyLiv, Hungama, JioCinema,

Display: 178 drgrees wide viewing angle | VRR | ALLM | MEMC | HDR 10 | HLG | Dolby

Vision | Multiple picture modes supported:

Dynamic，Standard，Sports，PC/Game，Energy Saving，Cinema，FILMMAKER

MODE Warranty Information: 2 Year Comprehensive Warranty on product provided by

Toshiba from date of purchase

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S.

powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type

post carbon filter auto low & high pressure switches with following size of storage tank

& LPH capacity & erected as directed

[A] 10 Ltr / Hr with 7 Ltr StorageTank

Item Description Quantities Unit Item Rates Amount

Providing and fixing PVC modular kitchen cabinet consisting of base and wall units,

made from high quality rigid PVC boards (minimum 15-18 mm thick), including

77 shutters, shelves, drawers, SS hinges, telescopic channels, handles, magnetic locks, 2.40 Sqm 7575.00

necessary fittings, cutting, fixing, complete as per design and direction of

Providing and Fixing SS 304 Foldable Checking bed having size 1.50 X 0.60 X 0.75 mm

including using of 25mm dia pipe, SS 2mm thick, matter of 25.4 (1") of 40 density, cover

with regine cloth of approved quality etc completed as directed by Engineer

Providing and Fixing of SS 304 Hanger for bag including using all necessary materials

like SS rail, screw etc completed as directed by Engineer lncharge.

I \ We am \ are willing to carry out the work at ……………………… % above\bellow percent (Should be written in figures and words) of the

estimated rate mentioned above. Amount of My\Our tender works put as under.

Estimate Amount Estimate Amount

Put to tender Rs___________ Put to tender Rs___________

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. Panchayat (R&B) Sub Division Panchayat (R&B) Division on