REPAIR TO WALL PANELLING, CUPBOARDS, JOINERY AND WOODEN WORK AT DGRE RDC MANALI.

Amount

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

Dismentling timber in fillets,rails,posts,rafter ,purlin etc under 40 Sqcm in section.

S&F, plain fillets squre,rectangular or triangular in section clean sawn secured with nails of Iind class soft wood sectional area Exc 13 and not Exc 25 Sqcm all as specefied.

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in Wall/ceiling complete all as specified and directed by Engr-in-Charge.

S&F, 20mm thick Second class hardwood Boarding, Planed one side with butt joints, fixed with nails in any situation as in eaves boards and like at any height including necessary scafoldins if reqd (except flooring and skirting) complete all as specified and directed by Engr-in-Charge.

S&F, block board 18mm thick grade II quality interior grade decorative type with decorative face veeners on one face fixed as in cupboard etc. complete all as specified and directed by Engr-in-Charge.

S&F in repair 4 mm thick veneered decorative ply wood gde-I with BWR resin with decorative face veneered on one face veneneered fixed to timber frame work.complete all as specified and directed by Engr-in-Charge.

M&L for french polish on surfaces on any description inluding cleaning and preperation the surface including one coat of wood filler on new work with two or more coats complete all as specified and directed by Engr-in-Charge.

S&F for both side Prelalminated particle board 18/19mm thick, exterior grade prelaminated both sides with decorative choice laminations in Almirah cupboards, Kitchen Cabinets and shutters of Kitchen cabinets / cupboards including teak wood leaping and polishing over it on edges of board complete all as specified and directed by Engr-In- Charge.

S&F, continious hinges 30mm wide flaps mild steel brite finish or elctrogalvanised all as specified and directed by Engr-in-Charge.

S&F in repairs, aluminim handle cast type 150mm size.complete all as specified and directed by Engr-in-Charge.

S&F in repair 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel brite finish.complete all as specified and directed by Engr-in-Charge.

S&F in repair ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed. complete all as specified and directed by Engr-in-Charge.

S&F, 75mm magnatic catchers suitable for kitchen copboards complete all as specified and directed by Enge-in-charge.

Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

S&F, mild steel of joist channel, angle, Tee section, or hollow tubes (rectangle/square/round) fixed indepently without connecting plates confirming to Grade Fe 410-0 or Gde E-250 quality( A) complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed by Engr-in-charge.

Taking down shutter of any description n.exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed by Enge-in-charge.

Taking down chowkets or frames exc 1.5 sqm but n.exc 4 sqm each and without taking off shutter from frame complete all as specified and directed by Enge-in-charge.

S&F, Plain straight 2nd Class hard wood chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned in joints complete all as specified and directed by Enge-in-charge.

S&F, 40 mm thick flush shutter , solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified complete all as specified and directed by Engr-in-charge.

S&F for 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24(a) complete all as specified and directed.

S&F, Aluminium, anodised, barrel tower bolts 200mm long of extruded section.complete all as specified and directed by Engr-in-Charge.

S&F, Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.complete all as specified and directed by Engr-in-Charge.

S&F, Butt hinges 100mm size, medium weight, cold rolled mild steel.complete all as specified and directed by Engr-in-Charge.

S&F, Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete all as specified and directed by Engr-in-Charge.

S&F, Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-Charge.

S&F, 140mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring.complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

S&F, mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. and fixed in position.complete all as specified and directed by Engr-in-Charge.

M/S SK Sharma & Co.