Modernization of Record Room-Supply Installation of Document Storage System at Various Sub Registrar Offices

od96777/2024_2025 : Supply of Mobile File Storage System in The Size of 11200mm D x 3600mm L x 2590mm Ht, 1 DFSU + 11 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type of 19 nos and 7 Panels with 6 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

od97380/2024_2025 : Supply of Mobile File Storage System in The Size of 8400mm D x 2700mm L x 2590mm Ht, 1 DFSU + 7 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type 9 nos and 7 Panels with 6 Loading Level for A4 type of 9 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

od97371/2024_2025 : Supply of Mobile File Storage System in The Size of 10500mm D x 2700mm L x 2510mm Ht, 1 DFSU + 10 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type of 17 nos and 7 Panels with 6 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

od98071/2024_2025 : Supply of Mobile File Storage System in The Size of 9100mmL X 1800mmD X 2470mmHt, 1 DFSU + 8 DFMU + 2 SFMU, 5 Panels with 4 Loading Level for A3 type 2 nos and 7 Panels with 6 Loading Level for A4 type 18 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.

od97483/2024_2025 : Supply of Mobile File Storage System in The Size of 8400mmL X 3600mmD X 2203mmHt, 1 DFSU + 7 DFMU + 2 SFMU, 4 Panels with 3 Loading Level for A3 type of 11 nos and 6 Panels with 5 Loading Level for A4 type of 7 nos. Angle-Bolted construction for superstructure with steel slotted / rolled / formed angles of size 40 x 40 x 14G thick. (As required), corner plates & electroplated nuts & bolts, Shelves-All load-bearing compartments will be in 20g. Sheet steel shelves of sizes as per drawings and load capacity as given in drawing, Partition-22 gauge Steel sheet for central partition & vertical partition for all compactors and fixed block, Cladding-Sides closed with 18 gauge Steel sheet panels, 25mm / 32mm square steel bright bar rails above floor level. Existing floor level should be in one level +/- 10mm throughout the rail length of the unit, Standard powder coating shades form outside are Havels Grey with a band of approx. 300mm Ht. behind the handles in Azure Blue shade & only Dark Grey shade on all other steel surfaces. (With air-drying synthetic enamel paint), Maximum uniformly distributed load per Compactor/Fixed Block/Last Compactor not to exceed as per the shelf capacity, Single locking system for complete unit, Manually operated safety stopper for the safety of the operator working between Compactor/Fixed Block, All Units are provided with Toggle Guard to prevent any derailment or falling free while moving, A centralized locking arrangement is provided by Lock Key and through Pad Lock Mounted on to the back of single last unit so that it gets locked on channels when all units are brought.