Periodic Renewal of RURAL ROAD Raja-ka-Talab Bari Batrahan Golwan Chhattar Lohali to Connection Rehan Samlate road KM 0.0 to 5.955 for the Year 2026 27 SH Providing and laying Tak coat and 30mm thick bituminous concrete HP0404VR001915108 km. 2

Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100(eighty-hundred) K.N. static Road roller in stages to proper grade and camber, applying and bromming, crushable screening at the rate of 0.22 cum ( zero point two two cubic meters) per ten square meters, to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –III, 53mm to 22.4mm ( Fifty three millimeters to twenty two point four millimeters) size, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications clause No. 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, sale tax, GSTor other taxes imposed by the Government.

Providing and applying tack coat with BITUMEN emulsion (RS-1)using emulsion pressure distributor at rate of 0.225 kg. (Zero point two two five kilograme) per square meter on the prepared bituminous surface and cleaned with hydraulic brooms as per MORD technical specifications clause No.503 including hauling of materials in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying 30mm (thirty millimetre) compacted thick Bituminous Concrete using plastic with crushed stone aggregate of grading -II (Two), 13.2 (Thirteen point two) millimetre nominal size, using bitumen VG-10 (VG-Ten) minimum 5.12% (Five point one two percent) and 0.38% (Zero point three eight percent) plastic based shredded material of weight of mix and filler on thoroughly cleaned surface by mechanical broom and dust removed by compressed air, mixed in computerised batch mix/HMP of 80-100 (Eighty to hundred) TPH capacity calibrated from time to time, mixing the bituminous concrete, transporting the mix material in clean insulated vehicles covered while in transit or awaiting, tipping and laying with hydrostatic paver finisher with sensor control to the required level alignment and grade, rolling with smooth wheeled, vibratory and tandem power road roller to achieve the desired compaction as per MORT&H specification clause 507 complete , within all leads and lifts including carriage of materials, plants and equipments by mechanical transport, as per the direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5mm (two point five millimeter) thick including reflectrosing glass beads @ 250 gms. (two hundred fifty grams) per square meter area, thickness of 2.5mm (two point five millimeter) is exclusive of surface applied glass beads as per IRC-35. The finished surface to be level uniform and free from streaks and holes including carriage of material within all leads and lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, sale tax,GST or other taxes imposed by the Government.