ADDITION ALTERATION AND CERTAIN REPAIR REPLACEMENT OF WOODEN DOORS AND CUPBOARDS REPAIR TO PLASTERING IN CERTAIN QUARTERS AT NASA AND CERA AND PROVN OF SPECIAL FITTINGS IN 02 EXISTING WASHROOMS FOR DISABLED PATIENTS AT INHS NAVJIVANI UNDER AGE BR II

Amount

Dismantling cabinets boarding, any description, fixed in any position with screws incl all fittings complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6 to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with liquid water proofing compound, surface finished even and fair complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured and paid separately.

Supply only Intergral waterproofing compund complete all as specified and as directed.

M&L for applying two coats of acrylic interior emulsion oil bound distember emulsion over a coat of primer over newly plastered surface including preparation complete all as specified and as directed.

M&L for applying one coats of acrylic interior emulsion oil bound distember emulsion over a coat of primer over old surface including preparation complete all as specified and as directed.

M&L for preparation of new plastered surface and applying two coats of sandex matt over a coat of primer on wall all as specified and as per manufactures instructions and directed by Engineer - in Charge.

M&L for preperation of old decorated surfaces and applying one coat of sandex matt finish on wall all as specified and as per manufacturer instructions.

S&F in repair prelaminated particle board 18/19 thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F in repair 18/20 mm thick plywood, BWR grade, type BB, fixed with screws to timber frame work as in cup boards etc complete all as specified and as directed.

S&F stainless steel telescopic channel drawers slides complete all as specified and as directed.

S&F stainless steel soft closing hydralic hinges for shutter complete all as specified and as directed.

S&F ball catches with 8mm dia steel ball, brass body and striking plate including letting in and fixed complete all as specified and as directed.

S&F 75mm size extruded brass handles fabricated type and polished complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and refixing in same opening after repair complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and as directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, etc complete all as specified and as directed.

M&L for filling concrete inside frame in PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both faces covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighing an average of 4 kgs per mtr complete all as specified and as directed.

S&F 30mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm complete all as specified and as directed.

S&F in repairs 100mm stainless steel butt hinges, cold rolled medium weight complete all as specified and as directed.

S&F in repairs 4 levers brass lock cupboard, grade 1, size 50mm complete all as specified and as directed.

S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F in repair 100mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repair 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repairs 100 mm size brass, 4 levers mortise lock, vertical type complete all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and overall length of cover plate 140mm complete all as specified and as directed.

M&L for preparation of surfaces exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and as directed.

M&L for preparation of old painted surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed.

S&F stainless steel 15 mm grab bar vertical swing horizontal for support near EWC fixed to mwall with necessary fixing arrangement complete all as specified and as directed.

S&F stainless steel 15 mm grab bar left 90° and right 90° fixed to mwall with necessary fixing arrangement complete all as specified and as directed.

S&F stainless steel 15 mm grab bar 842 mm long fixed to mwall with necessary fixing arrangement complete all as specified and as directed.

S&F plastic seat cover (colour) closed pattern with flat bottom suitable for EWC with fixing arrangement (disabled student) including taking down old cover complete all as specified and as directed.

Gates Infra Construction Co

SANDR

GMS Builders

KDR CONSTRUCTION