Repair/replacement of internal wiring with misc items of E/M works at Air Force Ramgarh, Chandan and Jaisalmer under GE (AF) Jaisalmer

Amount

Taking down carefully existing unserviceable/perished conduit/ batten/ casing caping aluminium/copper point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators, box type tube light fittings etc and making good the disturbed surfaces of wall/ceiling complete all as specified & directed.

Material and labour for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non metalic rigid PVC conduit 20mm dia with accessories fixed to cutting chases in walls by cutter and making good the surface in cement and sand mortar 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surfaces conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel/wooden terminal boxes (as per site requirement) including providing new 3 mm thick plastic laminated sheet cover (Hylem) complete all as specified and directed.

All as per serial item No. 2.00 here-in-before but for one fan point controlled by one switch and regulator.

All as per serial item No. 2.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 2.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 2.00 here-in-before but for one bell/buzzer point controlled by one bell push.

Material and labour for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated in & including second class hard wood board closed recessed, fixed on wall for mounting fittings like switches, sockets, regulators etc with and including 3mm thick phenolic laminated sheet top cover, complete all as specified & directed.

All as per serial item No. 7.00 here-in-before but for one fan point controlled by one switch and regulator.

All as per serial item No. 7.00 here-in-before but for one bell/buzzer point controlled by one bell push.

All as per serial item No. 7.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 7.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 2.00 here-in-before but for one 6 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour complete all as specified.

All as per serial item No. 7.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour complete all as specified.

Supply and fixing switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts (ISI Marked).

Supply and fixing switch piano, flush type, single pole, two way, 5/6 Amp, 230 Volts (ISI Marked).

Supply and fixing bell push, flush type, single pole, 5 Amp, 230 Volts (ISI Marked).

Supply and fixing switch piano, flush type, single pole, one way, 15 Amp, 230 Volts (ISI Marked).

Supply and fixing socket outlet, 2 in 1, 3 pin, 5/6 Amp, flush type, 240 Volts (ISI Marked).

Supply and fixing socket outlet, 2 in 1, 3 pin, 15/16 Amp, flush type, 240 Volts (ISI Marked).

Supply and fixing ceiling rose surface bakelite 65mmx17.5mm with two or three terminal PVC/Polycarbonate, isolated body (ISI Marked) complete all as specified.

Supply and fixing lamp holder, PVC / Polycarbonate type (angle/batten) with back plate suitable for batten fittings, complete all as specified.

Supply and fixing stepped type electronic fan regulator, flush type and connecting up, ISI marked, 240 Volts.

Supply and fixing Bell Multi Music Type, single pole, AC, 230 Volts (ISI Marked).

S&F Modular switch 6 Amps, 250 Volt, Single Pole, AC, one way, one module (ISI Marked) complete all as specified. Make : Legrand (Arteor) Cat Part No 5734 00 or equivalent in Schneider (Opale)/Anchor(Ave).

S&F Modular switch 20 Amps, 250 Volt, Single Pole, AC, one way with indicator one module (ISI Marked) complete all as specified. Make : Legrand (Arteor) Cat Part No 5720 63 or equivalent in Schneider (Opale)/Anchor(Ave).

S&F Modular switch 6 Amps, 250 Volts, Single Pole, AC, two way, one module (ISI Marked) complete all as specified. Make : Legrand (Arteor) Cat Part No 5734 02 or equivalent in Schneider (Opale)/Anchor(Ave).

S&F Modular Socket shuttered, 6 Amps, 250 volts, 2/3 Pin combined, Single Pole, universal India two module (ISI Marked) complete all as specified. Make : Legrand (Arteor) Cat Part No 5734 70 or equivalent in Schneider (Opale)/Anchor(Ave).

S&F Modular Socket shuttered, 6/16 Amps, 250 volts, 3 Pin combined, Single Pole, Indian two module (ISI Marked) complete all as specified. Make : Legrand (Arteor) Cat Part No 5734 71 or equivalent in Schneider (Opale)/Anchor(Ave).

S&F Modular Fan Regulator, step type, 120 Watt, 2 module, 250 volts, (ISI Marked) complete all as specified. Make : Legrand (Arteor) Cat Part No 5734 69 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply & fixing in replacement 25 Amps, MCB Protected Socket (Modular AC Box) Four Module, Single Pole, repturing capacity 10 kA and neutral enclosure in sheet steel with a two pin and earth plug and socket complete all as specified. Make : STANDARD Cat Part No DSDMCDP0251025 or equivalent in Indoasian/Schneider/Siemens/Legrand.

Supply and fixing Modular Metal flush mounting box of 1/2 Module complete all as specified and directed. Make : Legrand (Arteor) Cat Part No 6890 07 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing Modular Metal flush mounting box of 3 Module complete all as specified and directed. Make : Legrand (Arteor) Cat Part No 6890 08 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing Modular Metal flush mounting box of 4 Module complete all as specified and directed. Make : Legrand (Arteor) Cat Part No 6890 09 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing Modular Metal flush mounting box of 6 Module complete all as specified and directed. Make : Legrand (Arteor) Cat Part No 6890 10 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing Modular Metal flush mounting box of 8 Module complete all as specified and directed. Make : Legrand (Arteor) Cat Part No 6890 42 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing Modular Metal flush mounting box of 12/16 Module complete all as specified and directed. Make : Legrand (Arteor) Cat Part No 6890 11 or equivalent in Schneider (Opale)/Anchor(Ave).

S&F white colour modular blanking plate, one module blank complete all as specified and directed. Make : Legrand (Arteor) Cat Part No 5736 49 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing white colour plates with frame for modular switch and socket of 1 module complete all as specified and as directed. Make : Legrand (Arteor) Cat Part No 5757 00 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing white colour plates with frame for modular switch and socket of 2 module complete all as specified and as directed. Make : Legrand (Arteor) Cat Part No 5757 10 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing white colour plates with frame for modular switch and socket of 03 module complete all as specified and as directed. Make : Legrand (Arteor) Cat Part No 5757 20 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing white colour plates with frame for modular switch and socket of 04 module complete all as specified and as directed. Make : Legrand (Arteor) Cat Part No 5757 30 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing white colour plates with frame for modular switch and socket of 6 module complete all as specified and as directed. Make : Legrand (Arteor) Cat Part No 5757 40 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing white colour plates with frame for modular switch and socket of 8 module complete all as specified and as directed. Make : Legrand (Arteor) Cat Part No 5757 50 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing white colour plates with frame for modular switch and socket of 2 x 6 module complete all as specified and as directed. Make : Legrand (Arteor) Cat Part No 5757 70 or equivalent in Schneider (Opale)/Anchor(Ave).

Supply and fixing 6 watt, IP-43 LED bulk head fitting in engineering plastic housing with clear prismatic diffuser and LED 6 watt with all accessories with 3 core flexible cable white of size 23/0.0076 including taking down old unserviceable bulk head complete all as specified and directed. Make : C&S Cat Part No CG80IB6WLED or equivalent in Syska/Philips/Bajaj.

M&L for Sub main wiring with 2x10.00 sqmm, single core, PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 10.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through in PVC casing caping including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 10.00 sqmm cable and one run of 10.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

M&L for Sub main wiring with 2x6.00 sqmm, single core, PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 6.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through in PVC casing caping including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 6.00 sqmm cable and one run of 6.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

M&L for Sub main wiring with 2x4.00 sqmm, single core, PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through in PVC casing caping including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 4.00 sqmm cable and one run of 4.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

M&L for Sub main wiring with 2x2.50 sqmm, single core, PVC insulated unsheathed multistranded copper conductor FRLS 1100 volts grade conforming to IS 694 including and 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour including drawn through in PVC casing caping including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 4.00 sqmm cable and one run of 4.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

S&F surface and wall mounted LED tube light fitting of capacity 9 watt, two feet basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver complete all as specified and directed by Engineer-in-Charge. Make : Cat Part No. LUMILINEBS9WLED840SPCWH of Havells or equivallent.

S&F surface and wall mounted LED tube light fitting of capacity 20 watt, four feet basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver complete all as specified and directed by Engineer-in-Charge. Make : Cat Part No. LUMILINEBS20WLED865SPCWH of Havells or equivallent.

S&F in replacement MCB, 6 to 32 Amp, Single Pole, 240 Volt, repturing capacity 10 kA, ‘C’ Curve, complete all as specified. Make : Legrand Cat Part No. 4085 95 or equivallent

S&F in replacement MCB, 40 to 63 Amp, Single Pole with Neutral, 240 Volt, repturing capacity 10 kA, ‘C’ Curve, complete all as specified. Make : Legrand Cat Part No. 4086 20 or equivallent.

S&F in replacement MCB, 40 to 63 Amp, Triple Pole, 415 Volt, repturing capacity 10 kA, ‘C’ Curve, complete all as specified. Make : Legrand Cat Part No. 4086 61 or equivallent.

S&F in replacement MCB, 40 to 63 Amp, Triple Pole Neutral, 415 Volt, repturing capacity 10 kA, ‘C’ Curve, complete all as specified. Make : Legrand Cat Part No. 4086 83 or equivallent.

Supply & fixing Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amps rated copper bus bar 240 Volts, 4 way, single pole and neutral link including taking down old unserviceable Distribution board any type complete all as specified and directed. Make : Standard Cat Part No DSDNSHODIW04 equivalent in Legrand/Indoasian/Siemens/Schneider.

Supply & fixing Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amps rated copper bus bar 240 Volts, 8 way (2+6 way), single pole and neutral link including taking down old unserviceable Distribution board any type complete all as specified and directed. Make : Standard Cat Part No DSDNSHODIW06 equivalent in Legrand/Indoasian/Siemens/Schneider.

Supply & fixing Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amps rated copper bus bar 240 Volts, 12 way (2+10 way), single pole and neutral link including taking down old unserviceable Distribution board any type complete all as specified and directed. Make : Standard Cat Part No DSDNSHODIW12 equivalent in Legrand/Indoasian/Siemens/Schneider.

Supply & fixing Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amps rated copper bus bar 415 Volts, 4 way, triple pole and neutral link including taking down old unserviceable Distribution board any type complete all as specified and directed. Make : Standard Cat Part No DSDNTHODIW04 equivalent in Legrand/Indoasian/Siemens/Schneider.

S&F MCCB, 4 Pole, 63 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC, 50 Hz, thermal Magnetic protection unit and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & directed. Make : Legrand Cat Part No. 4200 13 or equivalent.

S&F MCCB, 4 Pole, 100 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC, 50 Hz, thermal Magnetic protection unit and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & directed. Make : Legrand Cat Part No. 4200 15 or equivalent.

S&F MCCB, 4 Pole, 160 Amps rating, rupturing capacity 16 kA, 415 Volt grade, AC, 50 Hz, thermal Magnetic protection unit and making connections using suitable size copper lugs/thimbles and crimping tool, including disconnecting & taking down old unserviceable MCCB, complete all as specified & directed. Make : Legrand Cat Part No. 4200 17 or equivalent.

S&F in replacement flameproof Fluorescent luminaire, tube light fitting, flameproof type T5 1x36 FTL watt including integral reflector made of aluminium alloy expoy finish LM6 aluminium housing with heat resistant tubular glass cover held in two, with built-in control gear accessories with electronic ballast, bipin holders, connector block, etc and all accessorie pre-wired and incuding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Bajaj Cat Part No. BJEXFTL 136 or equivalent.

S&F 36 watt 2'x2' LED Panel-595x595mm, Cygnus Series Recess Mounting LED Slim Ceiling light with white powder coated extruded aluminium housing and milky diffuser including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23/0.0076 including taking down old unserviceable fittings complete all as specified and directed. Make : C&S Cat Part No LTCRSLM36WATT2x2 or equivalent in philips/Havells/CG/Bajaj.

S&F in replacement single phase electronic energy meter with LCD display of rating 5-30 Amp class 1.0, 240 Volt, 50 Hz counter type display with transparent hinge including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-Charge. Make : HPL Cat Part No SPPC131000000200C00 or equivalent in Neptune

Supply, install, testing and commissioning of LT panel size 800 mm x 600 mm x 150 mm enclosures cubical weather and vermin proof totally enclosed made out of 1.60 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50 Hz double door with front openable and PVC acrylic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wall duly powder coated with comprising of the following :-

INCOMING :- (i) MCCB 63 Amps 4 Pole, 415 Volt, repturing capacity 25 kA, adjustable thermal & fixed magnetic setting Ics = 100% = 01 No of Make : Legrand Cat Part No. 4200 53 or equivalent Siemens/Havells/C&S electric/. (ii) Phase indicating lamp LED type with HRC fuse – 1 Set of three. (iii) ON/OFF indicating lamp on incomer feeder for status of feeder = 02 Nos (iii) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc - 04 Nos. OUT GOING (i) MCB 32 Amp, 415 Volt, 10 kA, Single pole with neutral - 04 Nos, Make : Legrand Cat Part No. 4086 17 or equivalent Siemens/Schnedier (ii) S&F single phase electronic energy meter with LCD display of rating 5-30 Amp class 1.0, 240V 50 Hz counter type display with transparent hinge including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed by Engr-in-Charge. Make : HPL Cat Part No. SPPC131000000C00 or equivalent in Neptune - 04 Nos.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 7.50 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 23 mm thick sand stone slab pit cover etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.

S&F in replacement 9 watt LED bulb. Make : Havells Cat Part No. LHLDEUEEMC8R009 or equivalent.

S&F in replacement 15 watt LED bulb. Make : Havells Cat Part No. LHLDDEEEML8R015 or equivalent.

S&F in replacement of switch flame proof rotary type with termination box in LM6, 6/16 Amps, Single pole, 250 volts complete all as specified and directed.

Nitin Enterprises

Rasam Engg Co.

M/s Shree Construction Company

Leelashah Enterprises