Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹48.7 L+₹12.3 L (33.9%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF AMBALA
GE AF AMBALA
GE AF/AMB-T-45/2022-23 REPAIRS / REPLACEMENT OF CONCRETE SLABS, DRAIN COVER SLABS, FOD TRAP, REPAIRS TO JOINTS WITH GRADE-B SEALING AND POLYURETHANE COMPOUNDS AND CONNECTED ITEMS IN TECHNICAL AREA AT AF STATION AMBALA UNDER GE (AF) AMBALA
2022_MES_570855_2
GE AF/AMB-T-45/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF AMBALA
ALL AS PER NIT AND TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
Yes
GE AF AMBALA
₹90,000
Yes
16 Feb 2023
21 Jan 2023
13 Feb 2023
21 Jan 2023
11 Feb 2023
28 Jan 2023
Amount
S&F in location Engineering plastic signage boards / link boards, single sided, with writings / signs / arrows with retro-reflective sheetings of approved type and colour, made of hard plastic or perplex sheet 4 to 5mm thick of approved colour and type, duly framed in with aluminium strip of suitable sizes as required, mounted up on adequate number of legs of minimum height of 3'6" made out of specialised frangible material, weather proof, suitable to withstand extreme cold, extreme heat and high velocity wind pressure, etc. complete all as specified and as directed of the following sizes: Notes: (i) Quoted rate shall be inclusive of the following: (a) Excavations for post holes (of min size 400x400x600mm) in any type of soil as required at site, including filling in and removal of excess soil (b) Duly embedding legs of boards into PCC 1:3:6 type C1 using 20mm graded stone aggregates upto GL (ii) Writings / alphabets / letters / dashes / arrows, etc. shall be of different sizes, types, etc. as per requirement of AF Authorities.
All as per serial item No 1.00 here in before but Link board of size upto1.00 Sqm
All as per serial item No 1.00 here in before but Link board of size above 1.00 Sqm but less than 1.50Sqm
All as per serial item No 1.00 here in before but Link board of size above 1.50 Sqm but less than 2.00Sqm
All as per serial item No 1.00 here in before but Link board of size above 2.00 Sqm but less than 2.50Sqm
Demolition of cement concrete in ground floor and paving n.exc 15 cm thick below or above ground level for taxi light etc including removal of demolished material (cement concrete) from site to a distance exc 1.5 km and n.exc 5.0 km & deposited where directed complete all as specified and directed by Engineer-in-charge.
Material and labour for PCC 1:2:4 type B 1, using 20 mm graded stone aggregate as in plinth of taxi light including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.
Demolition of cement concrete (PQC) of existing slab (un-reinforced) or any rigid portion of any description and in any position of runway or pavements etc including removal of demolished material (cement concrete) from site to a distance exc 1.5 km and n.exc 5.0 km & deposited where directed complete all as specified and directed by Engineer-in-charge. Note :- (i) The work against these items shall be done very carefully by the contractor. It shall be ensured that no damage to the adjoining surface/existing work are occurred and, incase any damages are occurred in adjoining surface/existing work, the same shall be make good by contractor without any extra cost to the Govt. (ii) The cost of repair to the cracks of adjoining slabs of the slabs ordered to be demolished developed during demolition deemed to be included in the quoted rate of above items and no extra payment shall be made on this account.
Material and labour providing pavement quality concrete (PQC) of flexural stength 45 kilogram per sq.cm in field using 410 kg of cement per cubic metre, ( with maximum size of coarse aggregate upto 40mm) as per mix design, with incorporation of non-circular synthetic fibre 'Recron 3-s @ 1.0 kg/cum of PQC, including all necessary form work for laying in bays complete all as specified and as shown on drawings. Notes:- (i) construction, joints,dummy joints (contraction joints) and expansion joints shall be measured and paid separately under respective items. (ii) Deduction shall be made in computing concrete quantity for expansion joints. (iii) Price adustment shall be applicable if excess quantity of cement content is used/approved in the execution of work under this item. However minus price adjustment shall be made for less quantity of cement used in the work based on inserted rate against item No. 32.00 of Sch 'A' Sec-V 33. (iv) Polyster non-circular fibre as secondary reinforcement mixed in concrete shall be measured and paid separately as "supply only" under relevant item of this schedule.
Material and labour for providing lean cement concrete of grade M-15 (Design Mix) using 20mm graded aggregate with minimum cement content 250 Kgs/Cubic metre incluidng spreading and consolidating complete al as specified and directetd by Engineer-in-Charge.
Material and labour for providing clean dry coarse sand uniformly graded, spread, levelled in layers 20 mm thick over existing pavement etc complete all as specified and directed by Engineer-in-charge..
Material and labour providing polythene film 400 micron, thick, white colour, laid over sand layer including all necessary cutting overlaps not less than 300mm and waste etc complete all as specified and directed by Engineer-in-charge.
Material and Labour for finishing of concrete roads/paving by brooming complete etc complete all as specified and directed by Engineer-in-charge.
Supply only polyester traingular fibre 6/12mm long with circun-circle diameter 30-35 micron, designed, for melting point of 240-260 degree celsius and having specific gravity 1-34 to 1-40, Recron 3-S, manufactured by M/S Reliance Industries Ltd, Mumbai etc complete all as specified and directed by Engineer-in-charge.
Material and Labour for forming contraction joints (Dummy joint) upto 100mm depth of concrete slab (PQC) x 8mm wide (Using diamond cutter) and cleaning and removing material, dirt,and all loose material etc. completely with compressor air blower from joints and filling with polyurethane joint sealant compound using mechinical means to a depth of 10mm (depth minimun above back up rod) with minimum performance guarantee of 10 years and minimum Movement Accommodation Factor (MAF) + 30 % confirming to the requirment of BS:5212, BS-4254 and EN-141875-2003 for Hydrolysis/water resistence test including two coats of primer and providing approved quality closed cell polythene back up rod of dia 25% more than the width of joint over joint filler board in position, applying masking tape on edge of joint to prevent accidental slippage of sealant on top surfaces and to give a neat finish to the sealant and removing the masking tape after sealant on is applied as required etc complete all as specified and directed by Engineer-in-charge.
Material and Labour for forming construction joint full depth of concrete and and 10mm wide (Using diamond cutter) including upto 1/3rd depth (minimum 100 mm) of concrete to form joint and cleaning and removing material, dirt,and all loose material etc. completely with compressor air blower from joints and filling with polyurethane joint sealant compound using mechinical means to a depth of 10mm (depth minimun above back up rod) with minimum performance guarantee of 10 years and minimum Movement Accommodation Factor (MAF) + 30 % confirming to the requirment of BS:5212, BS-4254 and EN-141875-2003 for Hydrolysis/water resistence test including two coats of primer and providing approved quality closed cell polythene back up rod of dia 25% more than the width of joint over joint filler board in position, applying masking tape on edge of joint to prevent accidental slippage of sealant on top surfaces and to give a neat finish to the sealant and removing the masking tape after sealant on is applied as required etc complete all as specified and directed by Engineer-in-charge..
Material and Labour for forming 20mm thick expansion joint in concrete slab of thickness, filled with preformed bituminous filler, applying bond breaker tape on top of filler board for complete width of joint and cleaning and removing material, dirt,and all loose material etc. completely with compressor air blower from joints and filling with polyurethane joint sealant compound using mechinical means to a depth of 10mm (depth minimun above back up rod) with minimum performance guarantee of 10 years and minimum Movement Accommodation Factor (MAF) + 30 % confirming to the requirment of BS:5212, BS-4254 and EN-141875-2003 for Hydrolysis/water resistence test including two coats of primer and providing approved quality closed cell polythene back up rod of dia 25% more than the width of joint over joint filler board in position, applying masking tape on edge of joint to prevent accidental slippage of sealant on top surfaces and to give a neat finish to the sealant and removing the masking tape after sealant on is applied as requiredetc complete all as specified and directed by Engineer-in-charge.
M&L for repair to damaged broken edged of existing cement concrete slabs of taxi track by cutting to a depth 10 to 50 mm, cleaning the surface and removal of loose material, dust by blowers, disposal of rubish to a distance exceeding 50m but n.exc 100m and applying evenly a coat of dencote 601 epoxy rich primer with sealer and filling in with Epoxy Re-sign denpatch compound complete all as specified and directed.
M&L in repair to cracks of existing bituminous surfaces of taxi tracks by cutting to a width of 10 to 25mm and 30 to 50mm deep by mechanical cutters, etc. cleaning with air compressor to remove all loose particle, dust, etc. and filling with epoxy tar compound as per manufacturer's instructions and disposing all rubbish/ refuse to a distance exceeding 50m but not exceeding 100m complete and all as specified and directed
M&L for taking out of old sealing compound grade 'B', etc. and cleaning, removing dirt / loose foreign materials, etc. with compressor air blower from any type of joints and of any thickness and any depth of taxi tracks and runways with a raker, coir brush, etc. and filling joint with polyurethane joint sealant compound using mechinical means to a depth of 10mm (depth minimun above back up rod) including two coats of primer and providing approved quality closed cell polythene backup rod of dia 25% more than the width of joint placed over existing joint filler board in position, applying masking tape on edge of joint to prevent accidental slippage of sealant on top surfaces and to give a neat finish to the sealant and removing the masking tape after sealant is applied as required, etc. complete all as specified and as directed for the following widths of joints:
Notes for serial item No. 20.00 : Notes: (i) Minimum Movement Accommodation Factor (MAF) shall be +30% conforming to the requirments as stipulated in BS:5212, BS-4254 and EN-141875-2003 (ii) Hydrolysis / water resistence test shall be catered as per relevant IS (iii) Joints dismantled, cleaned and filled as above shall bear a performance guarantee of minimum 10years from the date of completion. The Contractor has to submit the said guarantee in Rs. 100 non-judicial stamp paper to the AO (iv) An amount @10% of the cost of joint filling shall be retained from the final bill till completion of above guarantee period. The Contractor may submit FDR of equal amounts in favour of the AO for the purpose (v) Filling work shall be done as per manufacturer's instructions and as specified (v) All rubbish / retrieved materials shall be disposed off to a distance exceeding 100m but not exceeding 500m including necessary cartage, etc. as required
Joints upto 12mm in width
Joints exceeding 12mm but not exceeding 25mm in width
Joints exceeding 25mm but not exceeding 35mm in width
Joints exceeding 35mm but not exceeding 45mm in width
Dismantling structural steel work including doors, gates, FOD trap but excluding framed trusses complete.
S&F mild steel framed work such as grills , grating etc with ends of bars shouldered and/or riveted or forged into spikes , framed guard bars, barred iron doors , ladders, drain cover, balusters ; walk ways ; railings , frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as directed.
M&L prepration of new steel surfaces exc 10 cm girth and apply two coat of synthetic enamel paint or one coat of red oxide primer.
Demolition of brick work built in CM or cement lime mortar complete all as specified.
Material and labour for brick work with sub class `B` bricks old size in CM 1:6 straight or curved on plan exc 6m mean radious complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar 1:6 on brick or concrete surface & finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in coping, kerbs, benching and bed block etc complete all as specified and directed by Engr-in-charge.
R. P. Suppliers and Construction Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .