Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAdmitted-Fee/PreQual/Technical/Finance IDUKKI | KERALA | 685501 | ₹6.3 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹6.4 L+₹1,091.97 (0.17%)Admitted-Fee/PreQual/Technical/Finance | ₹6.4 L+₹1,091.97 (0.17%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | K N SASIDHARAN L2 | RAJEEV P P L1 |
|---|---|---|---|---|---|
| 1.00Civil Works | |||||
| 1.00 | OD87133/2026-2027
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622
(thickness to be
specified by the manufacturer), of approved make, in all colours, shades except
burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in
skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete. | 25.2 | sqm | 1,336.57 ₹33,681.56 | 1,333.56 ₹33,605.71 Lowest |
| 1.00 | 21.1.1.1
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade
according to IS : 1868, Minimum anodic coating of grade AC 15) | 187.78 | kg | 548.5 ₹1,02,997.33 | 544.2 ₹1,02,189.88 Lowest |
| 1.00 | 21.2.1
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one
side and balancing lamination on other side | 17 | sqm | 1,215.27 ₹20,659.59 | 1,210.26 ₹20,574.42 Lowest |
| 1.00 | 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness (weight not less than 10kg/sqm) | 10 | sqm | 1,279.82 ₹12,798.2 | 1,278.82 ₹12,788.2 Lowest |
| 1.00 | 21.6
Providing and fixing 6 mm dia. G I level adjusting hangers ( upto 1200 mm length),
fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm size 60
mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long,
complete as per direction of Engineer -in-Charge. | 24 | no | 88.95 ₹2,134.8 Lowest | 88.95 ₹2,134.8 Lowest |
| 1.01 | 21.5
Providing and fixing powder coated aluminium work ( minimum thickness of powder
coating 50 micron) consisting of tee /angle sections, of approved make conforming to
IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P
brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with
stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I
level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all
complete as per approved architectural drawings and direction of the Engineer-in-
Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid
for separately ). | 186.56 | kg | 845.94 ₹1,57,818.57 Lowest | 845.94 ₹1,57,818.57 Lowest |
| 1.01 | 50.12.4.2
Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board
ceiling of approved quality in aluminium frame work with necessary screws etc
complete ( aluminium frame work shall be paid separately) | 24 | sqm | 1,017.6 ₹24,422.4 Lowest | 1,017.6 ₹24,422.4 Lowest |
| 1.01 | 50.18.7.4.2
Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00
m spacing. this includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 6 Kgf/cm2 - internal work- Exposed on wall | 30 | metre | 337.8 ₹10,134 Lowest | 337.8 ₹10,134 Lowest |
| 1.01 | 50.18.9.9.2
Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent
cement, trenching, refilling & testing of joints complete as per direction of
Engineer in CHarge. 110 mm dia 4 Kg/cm2 | 30 | metre | 534.11 ₹16,023.3 Lowest | 534.11 ₹16,023.3 Lowest |
Tender Value
₹6.3 L
EMD Value
₹15,855
Closing Date
20 Aug 2026, 3:00 pmClosed
Managing Director, Matsyafed
Matsyafed Head Office, Kamaleswaram, Manacaud P.O, Thiruvananthapuram
1st quality wall tiles for walls, aluminium work for doors and partition, 12mm thick PCB and glazing in aluminium for partitions. False ceiling 6mm dia GI level adjusting hangers, powder-coated aluminium etc
2026_MFED_864080_1
MFED/647/2026-ENGG
Open Tender
Civil Works - Buildings
Item Rate
Matsyafed Fish Mart at Mulanthuruthy
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,400
₹15,855
22 Aug 2026
4 Aug 2026
22 Aug 2026
4 Aug 2026
20 Aug 2026
4 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Civil Works | |||||
| 0.999 | OD87133/2026-2027
Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622
(thickness to be
specified by the manufacturer), of approved make, in all colours, shades except
burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in
skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1
cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete. | 1 | sqm | - | - |
| 0.000 | 21.1.1.1
Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash
fasteners of required dia and size, including necessary filling up the gaps at junctions,
i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminnium snap beading for
glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash
fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade
according to IS : 1868, Minimum anodic coating of grade AC 15) | - | kg | - | - |
| 0.999 | 21.2.1
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer
or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling
fixed in aluminum doors, windows shutters and partition frames with C.P. brass /
stainless steel screws etc. complete as per architectural drawings and directions of
Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one
side and balancing lamination on other side | - | sqm | - | - |
| 0.000 | 21.3.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the
architectural drawings and the directions of Engineer - in -Charge. ( Cost of
aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm
thickness (weight not less than 10kg/sqm) | - | sqm | - | - |
| 0.999 | 21.6
Providing and fixing 6 mm dia. G I level adjusting hangers ( upto 1200 mm length),
fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm size 60
mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long,
complete as per direction of Engineer -in-Charge. | - | no | - | - |
| 0.000 | 21.5
Providing and fixing powder coated aluminium work ( minimum thickness of powder
coating 50 micron) consisting of tee /angle sections, of approved make conforming to
IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P
brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with
stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I
level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all
complete as per approved architectural drawings and direction of the Engineer-in-
Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid
for separately ). | - | kg | - | - |
| 0.999 | 50.12.4.2
Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board
ceiling of approved quality in aluminium frame work with necessary screws etc
complete ( aluminium frame work shall be paid separately) | - | sqm | - | - |
| 0.000 | 50.18.7.4.2
Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00
m spacing. this includes jointing of pipes & fittings with one step PVC solvent
cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm
dia 6 Kgf/cm2 - internal work- Exposed on wall | - | metre | - | - |
| 0.999 | 50.18.9.9.2
Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent
cement, trenching, refilling & testing of joints complete as per direction of
Engineer in CHarge. 110 mm dia 4 Kg/cm2 | - | metre | - | - |
stage.html
html • 0.02 MB
finance_1461924.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.73 MB
Tendernotice_2.pdf
PDF • 36.94 MB
Tendernotice_3.pdf
PDF • 0.28 MB
Tendernotice_4.pdf
PDF • 0.45 MB
Tendernotice_5.pdf
PDF • 0.20 MB
Tendernotice_6.pdf
PDF • 0.28 MB
Tendernotice_7.pdf
PDF • 0.19 MB
BOQ_1461924.xls
BOQ • 0.27 MB
corrigendum.pdf
PDF • 0.63 MB
courrigendum.pdf
PDF • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .