REPAIR TO RIFLE RANGE DRAINS CULVERT BOUNDARY WALL TRAVERSES AND HARD STANDING AT MIL STN GANDHINAGAR

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Demolition of reinforced cement concrete of any description etc complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for fly ash Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 35mm thick, precast cement concrete 1:2:4, Type B-0 using 12.5mm graded stone aggregate as in louvers and jallies, (measured solid) including all mouldings and precast cement concrete 1:2:4 type B-0, pillars/supports to jallies, set in cement mortar 1:4 complete including taking down old Jallies all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking etc and binding with MS wire 0.9mm dia (annealed) complete all as specified and directed.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, etc. including cranking, bending, hooking etc and binding with MS wire 0.9mm dia (annealed) complete all as specified and directed.

M&L for Reinforcement cement concrte B-1 1:2:4 (using 20 mm graded stone aggregate) as in coping , Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for rough finished formwork to lintel band/Coping sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as specified and directed.

M&L for rendering cement plaster 12 mm thick in cement mortar (1:4) on fare faces of brick work or concrete surfaces of walls complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coat of cement base paint over a coat of white cement primer complete all as specified and directed

Dismantling of Pre cast post of any section, including taking out embedded in concrete , brick work or masonry portion from natural ground and making good the disturbed ground complete all as specified and directed.

Dismantling of Pre cast panel of size 300 mmx45 mm fixed in column all as specified and directed.

M & L for cement concrete (1:2:4) type B2 using 40 mm graded stone aggregateas in foundation, filling and mass concrete complete all as specified and directed.

M & L pre stressed pre cast RCC (M-25 grade) column cross section 150 mm x 150 mm with contineous vertical grooves of size 60 mm x 35 mm at two sides of column to receive the precast panels including reinforced with 7 nos wires of 3 mm dia high tensile corbonized steel surfaces finished even and smooth including errecting in position all as specified and as directed.

M & L pre stressed pre cast RCC (M-25 grade) panels of cross section of panel (300X45 mm) reinforced with 4 nos wires of 3 mm dia high tensile corbonized steel, including fixing in position in between column grooves and jointing and flush pointing of all horizontal and vertical joints of panels with cement mortar 1:3 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in hard standing laid in alternate bay floors and finishing the top surface even and smooth without using extra cement complete all as specified and directed.

M&L 75 mm thick cement concrete type D2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc complete all as specified and directed.

M&L 40 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) in floors, and pavings etc complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded granite stone aggregate) in surface channel and drains etc complete all as specified and directed.

Raking out cement mortar joints/ pointing to masonry or brick work in single detached joinst for flshing etc complete all as specifide and directed.

M&L for flush pointing to bricks laid flat in cement mortar 1:4 complete all as specifide and directed.

M&L for 60 mm thick machine pressed concrete rubber moulded interlocking paver block any shape size and tint (as approved by Engr -in- Charge) of mix M-35 with gray cement and pigment with 25 mm thick sand cushioning including takingout old paver block floor complete all as specified and directed.

M&L rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry over 15mm thick cement screed bed in cm 1:6 with grey cement and pigments in floors including taking down old tile complete all as specified and directed.

M&L precast curve stone of cement concrete type C-1 (1:3:6) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar (1:4) complete.

M&L providing cement concrete (1:2:4) type B1(using 20mm graded stone aggregate) as in cills, steps, seismic and other similar and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, knelers, apex stones complete all as specified and directed.

M&L prepration & applying two coat of synthetic enamel paint any tint or colour on untreated surface of finished concrete such as kerb stone over 10 cm girth or width not otherwise described

M&L 450 mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in cocrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 450mm bore pipes complete all as specified and directed.

Haritwal traders

JIYA CONSTRUCTION

Ramdev and Sons

Shree Builders