SPL REPAIR/REPLACEMENT OF LT CABLE, LT PCC POLE AND CONNECTED WORKS IN TECHNICAL AREA AT BANAR UNDER GE BANAR

Amount

Supply, laying, testing & commissioing of 16 Sqmm 4 core size XLPE insulated, PVC sheathed, galvanised steel strip or wire armoured, electric power cable (heavy duty) with multistranded aluminum conductors, IS 7098 Part I marked, suitable for LT 1100 Volt system,laid in trenches / ducts / fixed on poles / walls / laid under roads / paths / drain / culverts or encased in GI pipe including jointing with aluminium terminal (lugs) & testing and taking down old U/S cable complete all as specified and as directed Note :- (i) The charges for aluminium terminal (lugs) suitable for cable is deemed to be included in quoted rates. (ii) Excavation, earth work ,cable protection , sand fillings shall be measured and paid separately under respective items of schedule.

All as per Ser No 1 above but size 25 sqmm 4 core

All as per Item Ser No 1.00 above but size 95 sqmm 3.5 core

Material and labour plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in base of the pole as a foundation or in any situation all as specified.

Material and labour plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping of the pole by demolition of existing /broken coping with taking out the LT cables and GI pipe Etc and refixing in new coping or in any situation all as specified.

Excavation in trenches in soft/ loose soil n.exc 1.5mtr wide and not exc 1.5mtr in depth and getting out complete all as specified.

All as per Iterm Ser No 6.00 here in before but exc 1.5 mtr or part there of in depth beyond the first 1.5 mtr depth complete all as specified and directed by Engineer-in-Charge..

Material and labour for Sand cushioning/ Sand covering using Tibba sand for underground cable protection complete all as specified and directed by Engineer-in-Charge. Note :- For the purpose of payment, only punned thickness witch comes out 18 cm will be measured.

Supply and laying unreinforced precast concrete cable cover, class LV, Type 1, flat, size 250mmx150mmx40mm laid perpendicular to cable length in trench air gap should not more than 5mm to each other after sand cushioning to cable and all as specified.

Returning, filling, in including spreading, leveling , watering and well ramming in layers n.exc 25 cm in soil complete all as specified.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified.

Supply and errecting in replacement of Prestressed concrete pole, 9.0 meter long, 102mm x 152mm at top and 102mm x 289mm at bottom, class 10 including painting alternative black & white strips of 30 cm width upto 1.5 mtr above ground level and all as required at site or complete all as specified.

S&F in replacement of 32 mm dia GI pipe bracket (Med grade) bent to shape of length not less than 1.2 mtr including fixing on wall/pole using flat iron clamps (heavy duty)of suitable size ,nuts,bolts,washers etc includig paint of two coats of alluminium paint over one coat of red oxide primer suitable for street light fittings all as specified and directed by Engr-in-charge. Note :- The quoted rate shall deemed to incudes the refixing of serviceable street light fittings.

Supply and Fixing in replacement of pole mounted junction box of outer size 300x200x120mm made out of FRP body (hot mulded type) with IP-66 protection and locking with screws alongwith 6 Amp rating MCB SP-01 No, up to 50 Amp rated 4 pole connector suitable to insert the cable size up to 25 sqmm x 4 core -02 No and din rail suitable for mounting the MCB/Connector etc complete in side box and duly fixed with 25x3mm FI clamps with nut bolts of suitable size on steel tubular pole/PCC/RCC pole including cable glands, aluminum lugs/thimbles for incoming and out going cables embossing/painting of danger notice of size not less than 10cm x 7.5cm with letters, figures and conventional skull and bones in signal red color on front face of box body complete all as specified.

M&L in replacemen of earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work and PCC cover with handle, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

M&L in replacement of earthing with Galvanised Steel earthplate of size 60x60cmx6mm thick electrode and 32x6mm GI strip as earth lead, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to 32x6mm earth strip by means of nuts, bolts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I, connected to earth test terminal point all as specified or as indicated including testing on completion (Rates inclusive of neccessary excavation in any type of soil, earth work, PCC pit, CI cover, funnel with watering pipe, suitable size of light grade GI Protection pipe for earth strip in ground etc. all as required at site for complete earthing). Note for item No 15 & 16 :- (i) The earth pit shall be refilled by boulders free from vegetable soil. (ii) Testing of earthing shall be carried out after completion of earthing.Payment for earthing shall be admissible after satisfactory test result.

M&L in replacement of PVC conduit 20 mm,heavy duty rigid non metallic including of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknuts, saddles, pipe hooks etc on steel tubular/PCC/RCC Poles and all as specified and directed.

Supply and fixing in replacement of PVC insulated & sheathed Copper flexible cable black size of 1.5 Sqmm x 3 Core of different colour (Red, Black & Green) and drawn through PVC conduit and connecting to Street light fitting on PCC/RCC/Steel pole all as specified.

Supply and fixing in replacement GI Pipe light grade 50 mm dia with necessary accessories/ fittings for cable protections of crossing of culverts/nallah/Road and all as specified.

Supply and fixing in replacement GI Pipe light grade 40 mm dia with necessary accessories/ fittings bracing with pole/wall by FI clamps made with 32x6mm for cable protections all as specified.

M&L for Cutting the road / hard standings and excavating in trenches not exceding 0.40 mtr wide and not exc 0.80 mtr deep across the road for laying cable including making good the excavated portion by means of PCC 1:2:4, type B1 using 20mm graded stone aggregate complete and matching with the surroundings all as directed.

Supply and installation, testing and commissioning in replacement LT feeder pillar box suitable for 415 Volts ,3 Phase 4 Wire, 50 Hz AC Supply System confirming to IS:8623/93, outdoor type floor mounting along with factory made type panel weather proof, vermin proof, fully ventilated and fabricated out of MS CRCA sheet of 3.15 mm thick having Aluminium bus bar of rating 200 A, three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The feeder pillar box shall be front and rear opening and having inner & outer shells. The inner shell duly compartmented for each control gear, including Powder coating internal & external surfaces. All the covers shall be provided with suitable locking arrangements, mounted on angle iron stand fixed at 75 cm from the ground level made out of angle size 50 X 50 X 6 mm grouted in PCC 1:3:6, and comprising of the following MCCB 4P 100 Amp 36 KA thermal adjustable type (incoming)-01 Nos MCCB 4P 63 Amp 36 KA thermal adjustable type (Outgoing)-01 Nos MCB TPN 415 Volt 10 KA 'B' 63 Amp (outgoing)-02 Nos Digital type volt meter up to 500 V Digital type Ammeter 500 Amp LED type Indicating Lamp (03 Nos) Note: (i) The size of Feeder pillar box should not be less than 900mmx750mmx450mm, (ii) Cost of PCC platform 50mm thick 1:2:4 Type B-1 over 75mm thick sub base 1:5:10 type E-2 using 40mm graded stone aggregate is inclusive in the rate quoted for this item. (iii) Drawing of LT Panel shall be submitted by manufacturer will be approved by Accepting Officer before placing order.

LOKESH ELECTRICAL WORKS CONTRACTOR

SARASWATI ELECTRIC STORE

M/s JOG SINGH MATERIALS

Anil Builders

M/s Vishaka Enterprises

Sai Ram Electricals and Refrigeration Works

INDO CONSTRUCTION

M/S SHREE BHAIRAV NATH ENTERPRISES

Shri Electrical Enterprises

new india engineers

SHISHODIA ENTERPRISES