Construction of Deep Causeway on Saliya Khabada Road (VR) At Ch. 4/590 to 4/790 Ta: Morva(H) Dist. Panchmahal

Name Of Work :- Construction of Deep Causeway on Saliya Khabada Road (VR) At Ch. 4/590 to 4/790 Ta: Morva(H)

Dist. Panchmahal

1 Construction of Deep Causeway on Saliya Khabada Road (VR) At Ch. 4/590 to 4/790 Ta: Morva(H) Dist. Panchmahal

Bill of Quantities

Item of work Quantities Rate in Amount

Estimated Unit Figures in

1 Clearing and grubbing of road length including up rooting wild vegetation, grass, 0.28 Hectar 28393.04

bush shurbs, saplings and trees of girth up to 300 mm removal of stumps, of such e

trees cut earlier and disposal of unserviceable material and stacking of serviceable

material (area of light density) by mechanical means in area of light jungle

2 Providing, laying and Spreading Granular sub-base (Grade-I) by providing close 540.00 Cum 1112.01

graded MCBT. material in single layer with motor graderon prepared surface,

mixing by mix in place method with rotovator at OMC and compacted

withvibratory roller 80 to 110 KN static weight to achieve desire density etc

3 Providing and laying compacted WBM of Grading-I MCBT metal of size 63 mm 96.00 Cum 1438.24

to 45 mm in required layers including using 16% stone screening 13.2 mm size

and 8% stone dust as filler including spreading watering & consolidation by

vibratory roller etc. as per MoRTH Specification compelete as directed by

Engineer - in - Charge.

4 Providing and laying compacted WBM of Grading-II MCBT metal of size 53 to 190.00 Cum 1539.24

22.4 mm in required layers including using 24% stone screening 11.2 mm size

and 8% stone dust as filler including spreading watering & consolidation by

vibratory roller etc. as per MoRTH Specification compelete as directed by

Engineer - in - Charge.

5 Providing and laying 100 mm Compacted of Specified quarry Spall in side 138.00 Cum 842.34

shoulder including carraige of material and spreading on prepared base including

compacting as per MOST Specification etc... complete.

6 Earthwork in cutting in all sorts of soil and soft murrum including conveying and 276.00 Cum 127.74

putting the stuff in spoil bank maintaining minimum distance of five meter

between top edge and cutting and toe of spoil bank.

7 Earthwork for embankment including breaking clods, dressing with all lead and 2992.00 Cum 158.61

lift and including watering rolling and consolidation of subgrade in layers at

O.M.C. to required dry density including filling the depression which occur

during the process using power roller 8T to 10T.(E) From Borrow area within all

8 Providing and laying Prime coat with Bitumen emulsion (SS-1) at the rate of 7.50 2007.00 Sq.mt 100.70

Kg / 10 Sq.M. on the prepare bituminous surface etc complete as directed with

all labour and materials

9 Providing and laying Tack coat with Bitumen emulsion (RS-1) at the rate of 2.50 2513.00 Sq.mt 20.30

Kg / 10 Sq.M. on the prepare bituminous surface etc complete as directed with

all labour and materials

10 Providing & laying Bituminous grout 37.50 mm thick with asphalt of grade of 96.00 MT. 2916.88

VG-30 at the rate of1.99% by weight of mix for mixing using B.T.Chips of

required gradation including cleaning and heating asphalt premix materials by hot

mix process in proper gradation and laying with paver finisher and consolidation

by roller of 8 to 10 tonnes including cost of all materials, Asphalt,aggregates,

labour Charges,royalty charges etc.completed as directed. including flushing key

aggregate @0.13 Cum/10 Sq.m.

01.Sch B DEEP ON SALIYA KHABADA Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

11 Providing laying and rolling 25 mm thick open graded premixed bitumineous 108.00 MT. 3779.42

carpet with B.T. aggregate as specified and using bitumen grade VG-30 for

mixing with agreegate at the rate of 3.36 % i.e 33.60 kg/M.T. of total mix

including heating and mixing in drum mix plant and spreading the same with

paver finisher and consolidation with power roller including necessary firewood,

oil, lubricants, labour charges etc. using contractor's own drum mix plant and

equipment, tool etc. completed in accordance with the requirement of

12 Providing & laying Bitumen seal coat with 0.18 Cmt/ 10 Smt. of stone chips 56.00 M.T 4606.61

6mm size & binder grade VG-30 content at the rate of 4.50 % by total weight of

mix . Hot mix laying process is including heating the asphalt aggregate

continuous batching, transporting the mix and spreading the same by paver

finisher & consolidation with power roller including providing necessary fire

wood, oil, lubricant, labour charges, higher charges of machinery etc, complete.

13 Providing and fixing Number plate of Marble plate stone of required size set in 1.00 Nos. 306.15

C.M. 1:4 including finishing and engeaving letters etc. completes.

14 Providing and fixing guard stone as per I.R.C., type design including white 532.00 Nos. 349.11

washing etc. complete. (I)Fixing in 1:5:

15 Citizen' s information Board- Providing and fixing of typical information board 1.00 Nos. 22562.39

as per instruction. Two MS plates of 1.6 mm thick, of 900 mm x 750mm size

fixed at top & bottom duly welded with MS angles of 25 x 25 x 5 mm thick M.S

plate shall be welded by two vertical M.S flats & four horizontal M.S flates 5 mm

thick to 75 mm x 75 mm of 12 SWG square tubes posts duly embedded in cement

concrete M-15 grade blocks of 600mm x 600mm x 750 mm, below ground level.

Painting New letters & figure of any shade with ready mixed synthetic enample

paint of superior quality in required shade and colour, All sections of framed

posts and steel tube will be painted with primer and two coats of epoxy paints as

per detailed drawing

16 Supply & fixing logo board of MMGSY diamond size (600 X 600mm) 16 gauge 1.00 Nos. 4096.56

& board plate size (900x 250mm) 16 gauge thick M. S plate and 2.40 meter deep

length single angle 75x 75x 6 mm size including fitting and painting lettering with

luminous colour as per drawing etc

17 Road marking with hot applied thermoplastic paints with reflectorising glass 57.00 Sq.mt 367.72

beads on bitumin surface providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excluding of surface applied glass beads as per

IRC:35-2015. The finished surface to be level, uniform and free from streaks and

holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white

colour marking should provide liminance coefficinet on cement road shalll be min

130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should meet the performance

criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

01.Sch B DEEP ON SALIYA KHABADA Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

18 Regulatory/Mandatory signs :Providing and fixing sing boards made out of 2mm 8.00 Nos. 3439.81

aluminium sheet; size 60cms. diameter circle as per the design of IRC-67-1977

pre treated with phospheting process & acid eteching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as

required; painted with best quality epoxy coatings in black and white bends. the

details of symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for

each leg. including excavation curing etc. complete under the supervision of

engineer in charge.(A) Engineer Grade(VR)...

19 Chevron sign :-Providing and fixing sign boards made out of 1.5mm aluminium 6.00 Nos. 3711.75

sheet / 3mm ACP (Aluminum composite Panel); size 60x50cm rectangular as per

design of IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality epoxy paint ;

reflectorised with High Intensity Prismatic Grade retro refiectivesheeting of Type-

4 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.3 mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of35x35x3mm; painted with

bestquality epoxy coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 7 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by contractor.

(A) Class-B Type-4 Retro Reflective sheeting

20 Around the Island/road direction sign board (Big) :-Providing & Fixing sign 2.00 Nos. 6798.92

boards made out of 2mm aluminium sheet, size 180 x 60 cms rectanglel as per

the attached drawing pre treated with phospheting process & acid etching. coated

with one coat of epoxy priemr and two coats of best quality epoxy paint

reflectorised with retro reflective sheeting as per latest M.O.S.T. 3.1m long

(2nos) stand post and frame fabricated from iron angle of 50x50x5mm, painted

with best quality epoxy coating the fixing at site shall be in 1:2:4 CC block of

size 45 x 45x 60cms for each leg, including excavation curing etc. complete under

the supervision of engineer in charge.(A) Engineer Grade(VR)...

21 Men at work (Heavy) sign :-Providing and fixing sing boards made out of 2mm 2.00 Nos. 6141.20

aluminium sheet; size 120 x 90cms. rectangle as as per the attached drawing. pre

treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; Letters and numerals

should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated

from suitable size iron angle of 50 x 50 x 5mm painted with best quality epoxy

coatings in black and white bends. the details of symbol or inscription / numerals

for each board shall be as per the instruction of engineer in charge. The fixing at

site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

01.Sch B DEEP ON SALIYA KHABADA Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

22 Danger Plate Sign :-Providing & fixing sign board made out of 2mm aluminium 2.00 Nos. 456.55

sheet, size 30cms diameter circle, pretreated with phospheting process and acid

etching, painted with one coat of epoxy primer and two coats of best quality

epoxy paint reflectorised with retro reflective sheeting as per latest M.O.S.T.

specifications (As per attached draiwng)(A) Engineer Grade(VR)...

23 Diversion sing board :-Providing & Fixing sign boards made out of 2mm 2.00 Nos. 6798.92

aluminium sheet, size 180 x 60 cms. rectangle as per the attached drawing pre

treated with phospheting process & acid etching. coated with one coat of epoxy

priemr and two coats of best quality epoxy paint reflectorised with retro reflective

sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as

per IRC-30-1968,3.1m long (2nos) stand post and frame fabricated from iron

angle of 35x35x3mm, 50x50x5mm painted with best quality epoxy coatings in

blak and white bends. The fixing at site shall be in 1:2:4 CC block of size 45 x

45x 60cms for each leg, including excavation curing etc. complete under the

supervision of engineer in charge.(A) Engineer Grade(VR)...

24 Hazard Marker Sign :-Providing and fixing sing boards made out of 2mm 2.00 Nos. 2423.74

aluminium sheet; size 90 x 30cms. rectangle as as per the design/drawing

attached (IRC) pretreated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised

with retro refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long

stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm &

50 x 50 x 5mm painted with best quality epoxy coatings The fixing at site shall

be in 1:2:4 CC block of size 45x45x 60cms. for each leg. including

excavation curing etc. complete under the supervision of engineer in charge.(A)

Engineer Grade(VR)...

25 Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm 8.00 Nos. 3722.36

aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-

67-1977. Pre treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with

retro refiectivesheeting as per latest M.O.S.T.Specifications; 3.1m long stand

postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x

x 6mm as required; painted with bestquality epoxy coatings in black andwhite

bends. The details of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing etc.complete under the

supervision of engineer in charge.(A) Engineer Grade(VR)

26 Informatory Signs :-Providing and fixing sing boards made out of 2mm 2.00 Nos. 3856.90

aluminium sheet; size 80 x 60cms. rectangle as per the design of IRC-67-1977 pre

treated with phospheting process & acid teching; coated with one coat of

epoxyprimer and two coats of best qualityepoxy paint; reflectorised with retro

refiective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand postand

frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm75x75x6mm as

required; painted with best qualityepoxy coatings in black and whitebends. the

details of symbol for eachboard shall details of symbol for eachboard shall be as

per the instruction ofengineer in charge. The fixing at site shall be in 1:2:4 CC

block of size 45 x45 x 60cms. for each leg. including excavation curing tec.

complete under the supervision of engineer in charge.(A) Engineer Grade(VR)...

27 Providing & Fixing " FLOOD GUAGE POST" on Causeway / dip having 2.00 Nos. 1984.65

(Channel size 100 x 50 mm) i.e. C.C. 1:2:4 in headwall, i.e. Painting & lettering

with ordinary paint colour as per instruction of engineer in charge.

01.Sch B DEEP ON SALIYA KHABADA Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

28 Cat Eye / Road Stud / RPM: Supplying of Raised Pavement Markers made of 33.00 Nos. 217.40

polycarbonate and ABS moulded body and reflective panels with Micro prismatic

lens (No Glass bead lens) capable of providing total internal reflection of the light

entering the lens face and shall support a load of 13635 kgs. tested in accordance

to ASTM D 4280 Type H and complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 - DO III Dt 11.06. 1997. The height,

width and length shall not exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side and the slope to the base shall

be 35 +/- 5 degree. The body of the marker should having finger grip for easy

and accurate placement and application with epoxy / bituminous Adhesive as

recommended by the manufacturer of the marker. The colour of the marker

should be as per the IRC 35-2015 and as directed by Engineer-in-charge.

29 Type - A :- Providing and erecting a "W" metal beam crash barrier comprising of 136.00 Rmt 3354.21

3 mm thick corrugated sheet metal beam rail, 70 cm above road / ground level,

fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 mt. centre

to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments

to be galvanised by hot dip process, all fittings to conform to IS:1367 and

IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel

section 150 x 75 x 5 mm, 330 mm long complete as per clause

30 Excavation for foundation in hard murrum and boulders and very stiff or sticky, 4587.00 Cum 582.22

clays and other similar strata including shoring and strutting and dewatering as

necessary and disposing of the excavated stuff as directed .

31 Providing and filling in foundation with ordinary Cement concrete M-100 mix 56.00 Cum 3212.00

and providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

32 Providing and casting in situ ordinary cement concrete M-150 mix and 3353.00 Cum 3785.48

providing necessary pin headers including shuttering, scaffolding, laying,

vibrating, curing and finishing complete without V-Groves. (A) Height from

33 Providing and filling in foundation with ordinary Cement concrete M‐150 mix 759.00 Cum 3582.47

and providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete.

34 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with 337.50 Meter 6595.90

collars for culverts including setting and joining the pipes in C.M. 1:2 watering

and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal

diameter.(vi) 1200mm dia.

35 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with 200.00 Meter 4685.19

collars for culverts including setting and joining the pipes in C.M. 1:2 watering

and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal

diameter. (iv) 900 mm dia.

36 Providing and laying in position FE 500D TMT bar reinforcement including 13.77 M.T 73217.53

cutting, bending, hooking and tying complete as per detailed drawings for the

following.(A) Piers (B) Abutments (C) R.C.C. Returns

37 Providing and Casting in situ controlled cement concrete M-250 for average 75 65.00 Cum 5175.24

mm thick Wearing Coat laid as directed including tempering, Vibrating,

finishing,curing and filling in joints with bituminious complete .

38 Providing and filling sand behind abutment & between returns in layers as 1684.00 Cum 445.41

39 Providing and laying weep hole in Aburtments, and returns by using A.C. pipe 272.00 No. 45.82

of 100mm including laying in proper grede and jointing the completed as per

detailed specification.

40 Providing and laying filter Media 600mm thick directed at the back of abutments, 340.00 Sq.mt 1180.34

returns and wing walls as per detailed specifications.

01.Sch B DEEP ON SALIYA KHABADA Page

Item of work Quantities Rate in Amount

Estimated Unit Figures in

41 Providing and laying rubble for appron (each stone weighting not less than 476.00 Cum 1010.60

40Kg.) including and packing and filing in the interestices with quarry-spalls.

42 Dismentaling the existing structure including removing and stacking the 662.00 Cum 886.06

dismentelled materials as and where directed. (A) R.C.C. work

Credit For Diversion

Rupees Two Crore Eighty Six Lakh(s) Ninety Nine Thousand Three Hundred Thirty Eight And Paise

I / We am / are willing to carryout the work at ………..% above/Below percent (………………………. Percent above/Below)

(Should be written in figure and words) of the estimated rates mentioned above. Amount of my / our tender worked out as

Estimated amount put to tender Rs: ……………. Estimated amount put to tender Rs: …………...

Deduct……% below Rs: …………………………. Add……% above Rs: ………………………….…

(Please strike out which ever is not applicable.)

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 Credit of Dismentalled /Reuse materils amounting of Rs. 989338.17 Must be fully recovered from respective 1st R.A. Bill Of Contractor's.

Quantities rate and wordings of items are as per estimate and calculation in the Sch. - B are airthmatically checked.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Sr.Divisional Account Officer Dy.Executive Engineer

Panchayat (R & B) Division Panchyat (R & B) Sub Division

Signaturre of contractor Executive Engineer

with seal Panchayat (R & B) Division

01.Sch B DEEP ON SALIYA KHABADA Page