Karnataka

Active

Works

Bridges

Construction of Bridge near Warwatti (K) in Humnabad Taluka.

Rural Development and Panchayat Raj Department

RDPR Division Office Bidar | Bidar, Karnataka

Amount: ₹1.3 CrCloses: 10 Jul 20262d left

Tender Value

₹1.3 Cr

EMD Value

₹1.9 L

Closing Date

10 Jul 2026, 9:30 pm2d left

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Construction of Bridge near Warwatti (K) in Humnabad Taluka.

Tender Information

Tender ID

RDPR/2026-27/BG/WORK_INDENT26809

Reference Number

RDPR/2026-27/BG/WORK_INDENT26809

Tender Type

Open

Product Category

Bridges

Location

RDPR Division Office Bidar

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredKPWD Registration Certificate

RequiredSimilar Nature of work Done Certificate as Prime Certificate from competent authority not below the rank of Executive Engineer or equivalent.

RequiredAnnual Turnover Certificate with UDIN

RequiredLine of credit

RequiredAny Other Documents

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal.

Contractors should have to upload the scanned copy of all necessary qualification documents and submit the original documents certificates after opening the tender for evaluation and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favour of the Executive Engineer, P.R.E. Division, Bidar, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module

Self declaration of machineries are not accepted

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the Work

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderers own expense.

Conditional Tenders will not be accepted

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machineries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work

All other conditions and requirements has to be fulfled as per the KW -4 Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/ Modifications/ Corrections if any will be published in the KPPP website only

The work should be executed as per the KTPP Act

The Time Period for Completion of the work is 06 Months (Including Rainy Season)

The Work Should be Completed within the Stipulated time period from the date of issue of workorder including Rainy Season

After Completion of Work Third Party/SQM/DQM Inspection reports submit with the bills

Technical Criteria

General

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Past Experience

Satisfactoriy completed as prime contractor at-least one similar work such as Construction of Bridge work of value not less than Rs.63.50 Lakhs in last 5 years i.e.2021-22, 2022-23, 2023-24, 2024-25 & 2025-26. Work done certificate should be obtained from the competent authority not below the rank of Executive Engineer.

Work Done Certificate

Executed in any one year the following minimum quantities of work (1) Earthwork Excavation/ Embankment/ Sub-Grade/ Earthen Shoulder: 8130.67 Cum (2) PCC/RCC/CC Pavement : 537.10 Cum (3) TMT Steel : 19.02 MT in last 5 years i.e.2021-22, 2022-23, 2023-24, 2024-25 & 2025-26. Work done certificate having quantities should be obtained from the competent authority not below the rank of Executive Engineer.

Work Done Certificate

Capabilities of Vendor

GST Registration

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

Tenderer should have valid Class-III and above KPWD Licence

PWD Registration Certificate (Class I/II/III/IV)

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- Technical and non technical staff

Banker Details for reference

Others -- Banker Details for reference

As per Govt. Order FD 263 EXP-12/2022 Dt. 11.05.2022 Machinery details Exempted for below Rs. 300.00 Lakhs Works.

Others -- Machinery/ Equipments

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 (a) achieved in at least two financial years a minimum financial turn over (in all cases of civil engineering construction works only) Rs.253.98 Lakhs Turnover certificate with UDI number.

Audited CA Certificate of Annual Turnover

Liquid assets and/or availability of credit facilities of no less than Rs. 63.50 Lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc

Line of Credit

Total value of civl engineering works executed and payments received in the last five years (year-wise) i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26.

ITR Filed Copy (Mentioning PAN)

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26.

Audited CA Certificate of Annual Turnover

Assessed Tender capacity shall be more than the Tendered Amount

Others -- Assessment on the Letter Head of this Tenderer.

Fee & Financial Details

Tender Fee Amount

₹3,180

EMD Fee Amount

₹1.9 L

Important Dates

Last Activity

23 Jun 2026

Published

23 Jun 2026

Bid Opening

13 Jul 2026

Download Ends

9 Jul 2026

Pre-Bid Meeting

8 Jul 2026

BOQ Preview

•

Construction of Bridge near Warwatti (K) in Humnabad Taluka.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

supplying, filling, spreading &leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engi...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with s...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, c/c spacing between vertical post n...

•

Filler joint - Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Surface Drains in Soil - Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated mate...

•

Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.2...

•

Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

26809 KW-4 BID DOCUMENT 2026-27.docx

Tender Document • 0.13 MB

Ready to Participate?

Download all tender documents and submit your bid