PROVISION OF TWO COVERED SHEDS WITH HARD STANDING MT OF 322 AD REGT, TOILET CUM BATHROOM NEAR BUILDING NO-280 OF 404 LT AD REGT (COMP) AND SPL REPAIRS TO CONVERSION OF FLUORESCENT TUBE TO LED LIGHT AT MISA CAMP UNDER GE(S) TEZPUR

Amount

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS- 1161-1979 grade St-240 complete all as specified and directed by Engineer-in-charge.

M & L framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, n.exc 10Kg each brackets, conforming to 290 Gde-E-165(Brackets over 10 Kg each to be measured under "Structural Steel .complete all as specified and directed by Engineer-in-charge.

S&F Mild steel screw bolts (machine made), diameter of neck 16 to 20mm, length of bolt exc 22.5cm and n exc 30cm longwith hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed by Engineer-in-charge.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws .complete all as specified and directed by Engineer-in-charge.

All as per item no. 4 above but plain in ridges complete all as specifed and directed.

M&L preparation of new steel surfaces and apply two coats of synthetic enamelled paint over a coat of red oxide primer over 10cm width or girth.complete all as specified and directed by Engineer-in-charge.

Excavation in trenches n exc 1.5 mtr depth and n exc 1.5 m wide in soft/loose soil and getting out.complete all as specified and directed by Engineer-in-charge.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in fdn filling mass concrete.complete all as specified and directed by Engineer-in-charge.

M&L for RCC 1:1.5:3 using ( 20 mm graded agg) as in foundation, base for column , plinth beam etc.complete all as specified and directed by Engineer-in-charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of oundation and plinth beams; and similar work; vertical or to batter.complete all as specified and directed by Engineer-in-charge.

S&F 10mm dia and over TMT bars as in reinforcement cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90 m dia.complete all as specified and directed by Engineer-in-charge.

All as per item No-11 above but 5 mm dia and over upto including 10 m dia in stirrups, spacers and bincer etc.complete all as specified and directed by Engineer-in-charge.

M&L brick work using sub class B brick (old size) curved or straight in plan exc 6 mtr mean radius in cm (1:6).complete all as specified and directed by Engineer-in-charge.

M&L for PCC 1:2:4 type B1 (using 20mm graded agg) as in cooping /benchingcomplete all as specified and directed.

M&L for applying two coats of cement base paint on exterior wall includings preparation of new plastered surface complete all as directed.

M&L PCC 1:3:6 type C-2 75 mm thick as using 40mm graded aggregate as in plinth protection /pavement even and smooth without using extra cement.complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Removing excavated materials n.exc 50 mtrs and depositing where directed at a level n exc 1.50mtrs the starting point.complete all as specified and directed.

Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc.complete all as specified and directed.

M & L for Hard core of broken stone or boulders 150 mm thick spread thickness of gauge n. Exc 63mm deposited spread and levelled in layers n. exc 15 cm thick watered and rammed to a true surface .complete all as specified and directed.

M&L for 150 mm thick cement concrete in sub base of floor in cement mortar (1:3:6) type C-2 .complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4 type B 2 using 40mm graded stone aggregate as in sub base of foooing complete all as specified and directed..

Forming 12mm thick expansion joints for 150mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade'A'.complete all as specified and directed.

Surface dressing n.exc 15 cm deep and getting out soft/loose soil complete all as specified and directed.

M&L 10mm thick plastering on wall concrete surfaces in cm (1:6) even and smooth w/o using extra cement complete all as specified and directed.

M&L 5 mm thick plastering on ceilling concrete surface in cm (1:3) even and smooth w/o using extra cement.

M&L 15 mm thick rendering in CM 1:4 even and smooth w/o using extra cement. on fair faces of brick work or concrete surface on external surfaces mixed with WPC @ 2% by the wt of cement complete all as specified and directed.

Supply only WPC of approved complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick ( Horizontal or sloping).complete all as specified and directed.

M&L for RCC 1:1.5:3 ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc.complete all as specified and directed.

M&L for RCC (1:2:4) type BI as in precast slab set in CM (1:4).complete all as specified and directed.

M&L for sand filling under floor n .exc 25 cm thk in layer spreading, levelling and well rammed in layer or in foundation incl. watering as reqd complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L non skid ceramic coloured tiles 300x300 x 7 to 8 mm thick in floors, set & jointed in neat cement slurry & pointed with white/coloured cement to match the shade of tiles complete all as specified and directed.

M&L 10mm thick backing coat in cm (1:4) over brick/concrete surface as in dada/skirting for fixiing of tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles 300x200 x 7 to 8 mm thick as in skirting/dados set & jointed in neat cement slurry & pointed with white/coloured cement to match the shade of tiles complete all as specified and directed.

S&F steel ventilator with top hung shutters including hinges with steel handle and steel peg stay with glazeing bars complete all as specified and directed

S/F 3 mm thick figured glass in squares n.exc 0.5 sqm in each pane glazing with oil putty complete all as specified and directed.

S & F PVC door chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing.

S & F Factory made solid panel pvc door shutter with chowkhats 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S.frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F extruded aluminium alloy with galvanised C-21 butt hinges 100 mm long and fixed.

S&F aluminium anodised, barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S&F 150 mm long aluminium handle, cast type, anodised complete all as specified and directed.

S/F vitreous china 580x440 mm,"ORISSA Pattern" water closet with 'P' or 'S' trap size squatting pan (Exclusive flushing cistern and flush pipe) including foot rest complete and provision of lime concrete bedding complete all as specified and directed.

S & F PVC Low level flushing cistren 10 Ltr capacety including all fitting such as flush pipe brackets complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm complete all specified and directed.

S&F vitreous china Bowl urinal flat back of size 430x370x340 mm flat back including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws,complete including waste pipe complete all as specified and directed.

S&F vitreous china wahs hand basin, white, flat back of size 550x 400mm excluding brackets and CP Couplings, taps, waste chain and proclain stopper, incl waste pipe but including brackets complete all as specified and directed.

S&F 15mm bore stop valve , chromium plated , fancy type, copper alloy , with cruntch or butterfly , screwed down high pressure with cruntch or butterfly handle both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F bib tap, chromium plated , fancy type, screwed for iron pipe or brass ferrule , 15 mm bore and fixed complete all as specified and directed.

S&F pillar taps, cast copper alloy , with capstan heads, fancy tupe, chromium plated , screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe , and fixed complete all as specified and directed.

S&F galvanized 15mm bore, med grade , tube galvanised with all fittngs and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F galvanized 20 mm bore, med grade , tube galvanised with all fittngs and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 110 mm PVC pipes single socketed in any length with rubber ring joints, laid in trenches/floors or fixed to wall complete all as specified and directed.

S&F 32 mm bore high density Polyethelene (HDPE) pipes of pressure rating 6 Kgf / Sq Cm complete to walls ,ceilings, or in floor etc complete all as specified and directed

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash.complete all as specified and directed.

Material and Labour including preparation of new plastered wall surfaces of wall and applying three coat of white Wash complete all as specified and directed.

Material and Labour two coat of cement base paint including preparation of new plastered surfaces over a coat of white wash complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position all as specified and directedin SSR Pt I complete all as specified and directed.

S & F 20mm dia of bore, ball brass valves, high pressure, with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L 150 mm salt-glazed stoneware drain pipes grade A laid in trenches and jointed complete all as specified and directed.

M & L Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate concrete in bed to drain pipe including packing under and haunching against the sides pipes 150 mm internal dia after they are laid joined and tested complete

M & L for point wiring with 1.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 votls grade with stranded copper conductor and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal box fixed with brass screws complete for housing the switches, socket outlets, fan regulators etc. for the following (Rate deemed to be inclusive of cutting chases and making good disturbed surface). (a) one light/fan point controlled by one, one way switch.

Supply and fixing LED batten with tube not less than 1x 20 watt ,6500K,system luminous efficacy more than 100lm/W with high quality aluminium extruded with decorative end caps with three year warranty including taking down old light fittings any description,capacity and size including disconnection of all electric connections and removing unserviceable materials off the site of work and makng good disturbed surfaces of walls ,ceilings etc complete all as per manufacturer's instructions.Make :- Jaquar Model No. LGLZ01x020xC (Note:-(1) A certificate /Job card signed by JE incharge will be collected from each quarter clearly highlighting Nos of electrical fittings replaced will be collected,the same deemed to be included in the unit rate. (2) Every fitting will be engraved with CA No and year of GE(S) Tezpur. (3) 2% Buffer stock will be submitted to MES store to replace the malfuctioned LED fittings for the said warranty period.The rate deemed to be included in the quoted rate. (4).Materials/Accessories/Equipments for which MAKE have not been specified in the Particular Specifications, shall be of Standard Makes having approval of HQ Chief Engineer Eastern Command or E-in-C’s Branch and shall strictly comply with Current Appropriate IS Specifications, for which IS Specification has not been issued/available, they shall comply with the Currents BS Specifications or as approved by GE.)

Supply and fixing in repairs wall mounted LED batten aluminium housing & integrated elctronic driver ,LED light fittings flicker free ,instant start with uniform light distribution not less than 10W 2 feet indoor decorative with 2core copper wire from ceiling rose to light fittings all as complete all as per manufacturer's instructionsJaquar Model No. LGLZ01x010xC (Note:-(1) A certificate /Job card signed by JE incharge will be collected from each quarter clearly highlighting Nos of electrical fittings replaced will be collected,the same deemed to be included in the unit rate. (2) Every fitting will be engraved with CA No and year of GE(S) Tezpur. (3) 2% Buffer stock will be submitted to MES store to replace the malfuctioned LED fittings for the said warranty period.The rate deemed to be included in the quoted rate. (4)Materials/Accessories/Equipments for which MAKE have not been specified in the Particular Specifications, shall be of Standard Makes having approval of HQ Chief Engineer Eastern Command or E-in-C’s Branch and shall strictly comply with Current Appropriate IS Specifications, for which IS Specification has not been issued/available, they shall comply with the Currents BS Specifications or as approved by GE.)

Supply and fixing in repairs decorative Trim Clipon LED Panel light not less than 6 Watt, 6500 K unique slimmest recess com surface panel, soul made up of high grade unbreakable polycorbonate material with 2 core copper wire all as complete all as per manufacturer's instructions.Make :- Jaquar/ Philips / Wipro. (Note:-(1) A certificate /Job card signed by JE incharge will be collected from each quarter clearly highlighting Nos of electrical fittings replaced will be collected,the same deemed to be included in the unit rate. (2) Every fitting will be engraved with CA No and year of GE(S) Tezpur. (3) 2% Buffer stock will be submitted to MES store to replace the malfuctioned LED fittings for the said warranty period.The rate deemed to be included in the quoted rate. (4)Materials/Accessories/Equipments for which MAKE have not been specified in the Particular Specifications, shall be of Standard Makes having approval of HQ Chief Engineer Eastern Command or E-in-C’s Branch and shall strictly comply with Current Appropriate IS Specifications, for which IS Specification has not been issued/available, they shall comply with the Currents BS Specifications or as approved by GE. Note 5:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 6-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose.

Ms N D Enterpise