MAINTENANCE AND REPAIRING WORK OF VARIOUS BUILDINGS IN DREAM CITY LIMITED, KHAJOD, SURAT.

ITEM Qty Unit Total

1 Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the excavated stuff upto

50 mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil Executed With Mechanised Efforts /

(1) Up to 1.5 Mt. depth 10 123.13 C.M.

2 Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the excavated stuff upto

50 mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil Executed With Manual Labours

(1) Up to 1.5 Mt. depth 5 212.52 C.M.

3 Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone agg. 40 m.m Nominal size )& curing comp.

excl. cost of from work in :Foundation & Plinth

4 Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded stone agg. 40 mm nominal size) & curing

comp. excl.cost of form work in (A) Foundation and Plinth

5 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal size)&curing comp.

excl. cost of form work in :(a) foundation & Plinth

6 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded stone agg. 20 mm nominal size)&

curing comp. Includ.cost of form work but exclu. Cost of reinforcement for reinforced concrete work in : (A) 5 4250.50 C.M.

Foundation, footing, Base of columns and Mass concrete.

7 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding

20 cm. in depth consolidating each disposited layer by ramming and watering.

8 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

ITEM Qty Unit Total

19 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in

(1)Having c/s area up to 0.08 s.mt- Ground Floor 1 12844.32 C.M.

First Floor 1 12885.28 C.M.

Second Floor 1 12926.24 C.M.

Terrace (third) Floor 1 12967.19 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 1 11166.97 C.M.

First Floor 1 11207.92 C.M.

Second Floor 1 11248.88 C.M.

Terrace (third) Floor 1 11289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 1 9201.68 C.M.

First Floor 1 9242.63 C.M.

Second Floor 1 9283.59 C.M.

Terrace (third) Floor 1 9324.54 C.M.

(1)Having c/s area up to 0.08s.mt- Ground Floor 1 9102.61 C.M.

First Floor 1 9143.56 C.M.

Second Floor 1 9184.52 C.M.

Terrace (third) Floor 1 9225.47 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 1 8174.41 C.M.

First Floor 1 8215.36 C.M.

Second Floor 1 8256.32 C.M.

Terrace (third) Floor 1 8297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 1 7086.88 C.M.

First Floor 1 7127.84 C.M.

Second Floor 1 7168.79 C.M.

ITEM Qty Unit Total

1 Terrace (third) Floor 1 7209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 1 7984.42 C.M.

First Floor 1 8025.37 C.M.

Second Floor 1 8066.33 C.M.

Terrace (third) Floor 1 8107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F. 1 7396.96 C.M.

First Floor 1 7437.92 C.M.

Second Floor 1 7478.87 C.M.

Terrace (third) Floor 1 7519.83 C.M.

(4) Slabs having more than 13 cm. Thickness -- G.F 1 6813.01 C.M.

First Floor 1 6853.96 C.M.

Second Floor 1 6894.92 C.M.

Terrace (third) Floor 1 6935.87 C.M.

(D) LINTELS: -- G.F 1 9982.37 C.M.

First Floor 1 10023.32 C.M.

Second Floor 1 10064.28 C.M.

Terrace (third) Floor 1 10105.23 C.M.

(E) CHAJJAS: -- G.F 1 5576.81 C.M.

First Floor 1 5617.76 C.M.

Second Floor 1 5658.72 C.M.

Terrace (third) Floor 1 5699.67 C.M.

10 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in

: (A) Stair cases including landings etc.

Ground Floor 1 7698.11 C.M.

First Floor 1 7739.06 C.M.

ITEM Qty Unit Total

1 Second Floor 1 7780.02 C.M.

Terrace (third) Floor 1 7820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 1 11613.07 C.M.

First Floor 1 11654.03 C.M.

Second Floor 1 11694.99 C.M.

Terrace (third) Floor 1 11735.94 C.M.

11 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. work incl. bending, binding & placing in

position etc.comp.---Ground Floor

First Floor 50 78.34 Kg.

Second Floor 50 79.39 Kg.

Terrace (third) Floor 50 80.44 Kg.

12 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks Ground Floor

First Floor 5 5018.55 C.M.

Second Floor 5 5307.27 C.M.

Terrace (third) Floor 5 5595.99 C.M.

13 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 5 712.81 S.M.

First Floor 5 719.37 S.M.

Second Floor 5 725.94 S.M.

Terrace (third) Floor 5 732.50 S.M.

14 Uncoursed rubble masonary with hard stone of approved quality in foundations and plinth in cement

mortar 1:6 (1 Cement : 6 sand) including leveling up etc. complete.

15 Providing Rubble Pitching with hard stone of approved quality in cement mortar 1:6 (1 Cement : 6 Coarse

sand) including leveling up ,Curing etc. complete excluding pointing

ITEM Qty Unit Total

1 Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind abutments and

between returns as directed.

17 Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls similar surfaces for

plastering & finished even & smooth with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces -- Ground

First Floor 10 228.84 S.M.

Second Floor 10 258.39 S.M.

Terrace (third) Floor 10 287.94 S.M.

(B) For ceilings &soffits of stairs

Ground Floor 50 225.34 S.M.

First Floor 10 254.89 S.M.

Second Floor 10 284.45 S.M.

Terrace (third) Floor 10 314.00 S.M.

18 Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete walls similar surfaces for

plastering & finished even & smooth with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces -- Ground

19 20mm thick sand faced cement plaster on walls for height more than 10 metres above ground level consisting

of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- 10 347.42 S.M.

sand) etc. complete.

20 Providing 20 mm thick double coat mala cement plaster on brick / concrete work for plastering comprising of

base coat 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc.

21 Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor levels

consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1

(1 cement: 1 sand) apply thick cement slurry and apply roller horizontal as well as vartical ( two times ) up to good 10 324.00 S.M.

quality and size of grain in elevation as per directed by engineer incharge.

ITEM Qty Unit Total

1 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For all floor

23 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor (M.R.) 10 50.00 R.M.

24 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

25 Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on

10mm thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury mixed with 5 1130.79 S.M.

pigment to match the shade of slab including rubbing and polishing etc. complete.

26 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson,Nitco,Somani ,Bell make at

all floor levels, in flooring, treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand) 5 900.29 S.M.

finished with flush pointing in white cement etc.com. For all floors

27 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, Jhonson,Nitco,Somani,Bell make at

all floor levels in skirting risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary 5 932.02 S.M.

cement paste for fixing and joined with white cement slurry etc. complete. For all floors

28 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

29 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry

30 Providing & laying granite slab 18mm thick in flooring, treads of steps and landing laid on bed of 20mm

thick cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in

white or colour cement including rubbing and polishing complete. ( Basic Rate:- Rs.1347.46/S.M.)

31 Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and pillars laid on 10mm

thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished with flush pointing in white or colour 5 2449.00 S.M.

cement including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

ITEM Qty Unit Total

1 Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid on 10mm thick cement mortar

1:4 (1 Cement : 4 Coarse sand) with nessary adhesive material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

33 Labour Charges For Edge Finished For Granite 5 43.43 R.M.

34 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson, Nitco, Somani, Bell, Asian or

Euro make in flooring,treads of steps & Landing laid on bed of 20 mm (Average) base of cement mortar

1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24" For Antiskid tiles

35 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush pointing in white cement. 5 1092.37 Sqm.

36 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry.

37 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water proof Ply Vennered &

mm th.laminate shall be pasted on both side with adhesives as specified by the manufacturers. The laminate shall

be as per approved shade & texture, of make incl. Sal wood frames of finished size 12cm x 7cm.incl. S.S. 1 3720.00 S.M.

Hinges with nessary screws & Anodized aluminum fixtures & fastenings For all Floor

38 Same as Above But Without Frame 1 2520.00 S.M.

39 Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & clearstory windows incl. Indian teak

wood frames of finished size 12cm x 7cm.incl. anodized aluminum fixtures & fastenings incl. Primer coat 1 5533.68 S.M.

of approved quality & two coats of oil painting etc. For all Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 1 5185.03 S.M.

(C) Fully Galzed 1 4836.39 S.M.

40 Providing and fixing 35mm thick shutters for Doors, windows and clearstory windows including anodised

alluminium butt hinges with necessary screws. (A) Indian teak wood. (i) Fully Panelled.

ITEM Qty Unit Total

1 Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam done in situ along with embedded wooden pieces for stiffening

& also taking hinges & fixtures. The whole FRP frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with fastener sleeve & alluminium fixtures &

42 Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc. At all floor levels with M.S.

flats at required spacing & frame around square or round bars with round headed bolts & round headed bolts and

nuts or by screws incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For all Floors

43 Providing & fixing in position collapsible steel shutters with vertical channels 20 x10 x 2 mm. Braced with flat

iron diagonals 20 x5mm size with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel pulleys

comp. with bolts, locking arrangements, stoppers, handles incl. applying a priming coat of Redlead paint etc. comp.

44 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe with hooked ends to RCC slabs

curing, layig including painting the exposed portion of loops, all as per standard design complete. 10 135.47 Each

45 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering, vibrating, curing &

mixed with approved water proofing cement compound or "CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top, bottom slab & side pardi for Under

ground Tank & Item incl. Necessary excavation & refilling the available earth, 15 cm th' C.C 1:4:8 for bedding

concrete, Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per design, 10mm.th. water proofing cement

plaster in C.M. 1:3 with smooth finishing,watering etc.Comp.to all inner face & bottom of tank curing etc.

comp. incl. Locking arrangement, outlet, inlet, overflow & wash out pipe arrangement as necessary & C.I. Cover

0.60 x .045 weight not less then 35kg. etc. com. as per structural drawing excluding Steel & as directed by Engineer- in-

Underground tank 1000 6.87 Lit.

46 Providing and filling in depressions of Bath and W.C. At all floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by Engineer in charge etc. comp..

ITEM Qty Unit Total

1 NOTE :- (1) The whole work is to be executed through specialized agency with a guarantee of 10 (Ten)

years given on a prescribed proforma duly stamped (2) The rate shall include for work at all floors &

conducting water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of

W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound confirming to IS:2645 about 25 mm. th' in

the floor of the depression & about 18mm th' On the side walls of the depression up to the floor level, water proofing 30 296.00 S.M.

plaster about 18 mm. th' be continued on the walls above the floor level for a height of 600 mm. with surface suitable to

receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading @0.008 C.M./S.M., thoroughly embedad

in plaster layer.

(B)per specifications

Providing & instructions

and laying of Engineer

integral cement based in charge

proofing consumption

treatment 0.316preparation

including Bags / S.M.)

of surface as required

for treatment of roofs, balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1

Cement : 5 Coarse sand) admixed with proprietary water proofing compound conforming to IS:2645 ,brick bats is

finally covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special water proofing compound

confirming to IS:2645 & top smooth finished with trowel with false chequered marking of 300 mm.size.The treatment

is carried along the vertical surface of the parapet & other adjoining wall up to height of about 300 mm in a shape of

quarter round vata Incl. curing etc. Comp. With average thickness of 120 mm and minimum thickness at khurra as

(c) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for

final test. All above operations to be down in order and as directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

ITEM Qty Unit Total

1 Proiding & laying water proofing treatment to vertical and horizontal surfaces like consisting of (a) I course of

applying cement slurry 4.4 kg per sq.mt. mixed with water proofing compound confirming to IS:2645 in rcommended

proportions. (b) II corse of 20mm cement plaster 1:3 mixed with water proofing compound in recommended proportion

(c) III course of applying blown or / resideal bitumen applied hot at 1.7 kg per sqm of area. (d) IV course of 400mm

micron th. PVC sheet. (Overlaps at joints of PVC sheet should be 200mm wide and pasted to each other with bitumen

about 1.7 kg./ sqm.)

49 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 10 101.91 No.

50 Providing & fixing at all floor levels,both face polished machine cut edge green kota stone slab (30mm) for

urinal partition joined with grey cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

51 Providing & fixing at all floor levels,both face polished machine cut edge Marble slab for urinal partition

joined with grey/White cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.) (Basic Cost- Rs. 5 1050.00 S.M.

WATER SUPPLY AND SANITARY ITEMS

52 Prov.& Fixing water closet squatting pan (Indian type W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 5 1471.41 No.

fine sand) etc. Comp.(A) Vitreous china long pattern of approved colour For all Floor

53 Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S trap including jointing

the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (seat and cover to be measured and paid 5 1356.81 Each

for separately) (A) Viterous china pattern - I (i) in approved colour

54 Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers (B)

Plastic seat and cover.

55 Providing & fixing wash basin with single hole for pillar tap at all floor levels, with C.I. or M.S. Brackets painted

white incl. cutting holes & making good the same incl. fittings such as pillar tap, capstan head screw down high

pressure with screws, shanks & back nuts, C.P. Brass waste trap, screw down stop tap 15 mm. dia. etc. complete. 5 2132.94 No.

(A) Vitreous china flat back wash basin 550 mm.x 400 mm. size in approved colour For all Floor

56 Providing & fixing Urinal or approved quality including conecting the Urinal with waste pipe, tap etc. complete. (A)

White earthenware flat back or corner type size 430 mm x 260mm x 350mm

57 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels, mounted on 6 mm. th. A.C.

sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws and washers etc. For all Floor 5 859.41 No.

ITEM Qty Unit Total

1 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber & water tight C.I.

cover with frame of 300mmx300mm size (inside) with weight includ. plastering smooth inside & outside

15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm x 100mm Size -P type

(B) 150mm x 100mm Size- P Type 2 1246.92 No.

59 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber & water tight Pre

cast R.C.C. cover of 300mmx300mm size (inside) includ. plastering smooth inside & outside 15mm. th' in C.M.1:3 2 1098.05 No.

etc. comp. (i) Square mouth traps---(A) 300mm x 300mm Size -P type

(B) 150mm x 100mm Size- P Type 2 1052.77 No.

60 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation 2 3166.77 No.

concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 2 2915.61 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 2 233.85 Each

61 Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5 with cement plaster 15 mm th'

in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade

stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. 2 2932.93 No.

On top etc. comp. Inside dimension,455 x 610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 2 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 2 242.39 Each

62 Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of following nominal internal

diameters incl. Testing of pipes and joints etc. Comp

ITEM Qty Unit Total

1 Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished bright etc. comp.-(A) 15mm dia. For

Providing & Fixing gun metal check or non return full way wheel valve at all floors levels, etc. complete. (A)

64 Providing & Fixing chromium plated brass half turn flush cock at all floor levels, of approved quality incl.

fixing in pipe line etc. Comp.-- 25 mm dia.

65 Providing & Fixing abonite ball cock of approved qualities directed etc. comp. (A) 25 mm. dia. 5 102.91 No.

66 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size having weight not less than 35 Kg. etc.

67 Providing and fixing C.P. brass waste for washbasin or sink.

(A) 32mmdia. 5 67.91 Each

(B) 40mm dia. 5 89.83 Each

68 Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make for soil and waste discharge system at all floor levels incl. All fixtures like bends, tees, shoe

etc. jointed with resin of approved brand & manufacture etc. comp. (M.R.) (a) 75mm Dia

69 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make for rain water at all floor levels incl. fixtures like bends, tees, shoe etc joined with resin

of approved brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

ITEM Qty Unit Total

1 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of Prince/Supreme/Jain/ Astral/

Tulsi/Finolex make including fittings make or equivalent as approved by angineer-in-charge. Pipe shall be fixed

on the wall the help of clamp at every two meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all

71 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

72 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm diameter with jali of the following

nominal diameter of self cleaning design with C.I. scread down or hinged grating including the cost of cutting and 5 586.27 NO

making good the walls.

73 Providing & Fixing in position PVC Cowl vent to pipes of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make etc.Comp. (A) 75 mm. dia.

(B) 110 mm Dia. 5 50.00 NO

ITEM Qty Unit Total

1 Providing & fixing M.S. Holder Bat clamps at all floor levels of approved design to C.I. Or S.C.I pipes

including the cost of cutting holes & making good the wall etc. Complete - 100 mm. dia. (M.R.) 5 30.00 No.

75 Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved design to C.I. Or S.C.I pipes

including the cost of cutting holes & making good the wall etc. Complete - 100 mm. dia. (M.R.)

76 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc. complete on terrace.

77 Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing with cement plaster 20 mm avg

thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 10 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 10 180.00 R.M.

78 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.: F650003, Jaquar FLR-5011N 2 1457.97 NO.

79 Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.: F530004, Jaquar FLR-5041N 2 1828.81 NO.

80 Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper connecting pipe 450 mm long and

nuts, washer and brass flange complete, including cutting and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.: F440020 F850094, jaquar CON 053 KN 2 1564.36 NO.

81 Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with Overhead Shower arm 200 mm with wall

flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 ,HindWare Cat. No.: F160144 2 1526.42 NO.

ITEM Qty Unit Total

1 Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N ,HindWare F880007 2 924.24 NO.

83 Providing & fixing S.S.towel rail of 600 mm long approved make including, providing & fixing C.P. brass screws,

making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM ,HindWare F880005T 2 1100.42 NO.

84 Providing & Fixing stainless steel recessed type Soap dish of approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N, HindWare F880011 2 839.91 NO.

85 Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ, HindWare F860075 2 3500.99 NO.

86 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N, HindWare F650013 2 1785.90 NO.

ITEMS FOR COMPOUND WALL & OTHER MISC. ITEMS :-

87 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

88 Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for reinforced concrete work in : (A) Foundation, 2 3741.69 C.M.

footing, Base of columns and Mass concrete.

ITEM Qty Unit Total

1 Providing & laying ordinary cement con.1:2:4

89 (1cement:2sand: graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incld. Cost of form work but excl. Cost of reinforcement for R.C.C. Work

in : Up to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 1 12335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 1 8692.87 C.M.

(1)Having c/s area up to 0.08s.mt 1 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 1 6578.07 C.M.

90 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings.

91 Steel work welded in built up sections, framed work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 1 9108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 1 10197.11 Qtl.

92 Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick with nuts, bolts, washer or G.I. pins,

excluding M.S. angles etc.complete as per relevent IS specification & directed by engineer in charge. (TATA or Jindal 10 311.00 SM

93 Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing with necessary barbed wire (12 x

guage, weight not less than 0.14 kg. / mt.) pins, hooks, excluding M.S. angles etc. complete as per relevent IS 10 125.00 Kg.

specification.& directed by engineer in charge

ITEM Qty Unit Total

1 Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet 0.5 mm. thick roofing fixed with

gslvanised grom J or L hook bolts and bolt 8mm dia with bituman and impet washer filled with white lead etc. 10 999.00 S.M.

Excluding the cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

95 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8m

diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata / Jindal or equivalent)

96 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8m

diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or equivalent)

97 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3 gutter with iron

brackets 40mm x 3mm size bolts, nuts, washers etc. including marking necessary connection with rain water pipes. 5 581.32 R.M.

(i) 0.8 mm thick

98 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks bolts and nuts 8mm

dia G.I. limpet and bitumen washer complete (1) 0.80 mm thick

99 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. sheet class-3 gutter with iron

brackets 40mm x 3mm size bolts, nuts, washers etc. including marking necessary connection with rain water pipes. 5 412.00 R.M.

(i) 0.63mm thick

100 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" of "L" hooks bolts and nuts 8mm

dia G.I. limpet and bitumen washer complete (1) 0.63mm thick sheet 5 464.00 R.M.

ITEM Qty Unit Total

1 Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main cladding on both edges. All fixing

holes must be predrilled oversize as specified for the sheet length and fastener being used. Fasteners must be fitted with

approved washers. Fixings should be tightened to ensure a weatherproof seal but they must not be over tightened Side-

lap fasteners must also be installed at specified centers with the FRP sheet having clearance holes provided as per the

main fasteners Weatherproofing shall be provided at all flashing points under the normal flashing by the fitting of a

foam closure strip to match the profile being used. Closure strips will be sealed to the sheet with an appropriate non

setting silicone sealant. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick 5 992.00 SM

(b) 2 mm thick 5 1100.00 SM

102 Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is coated with an anti-UV Co-extrusion

layer having good weather resistance, it can maintain its optical properties and mechanical performance for a long time.

Fasting is usually done by screws. , The fastening screws should be inserted about 500 mm apart and 300mm apart

Along the supporting internal purlin and edge pulin.All fixing holes with diameter at least 2 mm larger than screw must

be predrilled into each screw location. The screws should be 6mm diameter with length according to sheet thickness

and corrosion resistant, with at least heavy duty hot dripped galvanized or stainless steel. Excluding the cost of purlins

rafter and trusses.

(a) 1.5 mm thick Solid Sheet 5 1261.00 SM

(b) 2 mm thick Solid Sheet 5 1510.00 SM

103 Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a) Medium duty "B" Class

104 Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a) Medium duty "B" Class 10 485.00 R.M.

ITEM Qty Unit Total

1 Providing & fixing black board on walls of 1.8mt.x1.2mt size made up to 12 mmth.B.W.P .Plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) fixed with teak wood beading of 65 mmx 50mm size,

rubbing & sanding comp., incl. applying two coats of black board paint over a priming coat on plywood & French 1 4193.00 No.

polishing the frame all round etc. Comp. as per instruction of Engineer in charge (M.R.)

106 Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to 18 mm th.ply (using IS 710 Marin ply)

with 1 mm thick outside green board & 0.8mm backside white laminate & with good Quality of

adhesive with appropriate fittings of Alluminium fittings or teak wood bedding 65 mmx 50mm size, rubbing & 1 5195.00 No.

sanding comp., as per instruction of Engineer in charge (M.R.)

107 Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick with appropriate fittings and

Alluminium fittings comp., as per instruction of Engineer in charge (M.R.)

108 Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top 18mm thick (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) commercial plywood with 1.0mm thick lamination sheet

fitting with teakwood moulding table top supported on 3" x 3" teakwood leg & 3" x 11/2" teakwood framing top and 1 14774.00 NO

bottom with french polish labour work hardware etc. as per site in charge instruction and as per drawing.

109 Providing & Fixing Librarian table with 18mm thick commercial plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) )with 1.0mm thick lamination sheet table top supported on 2" x 2" teakwood leg &

make 3 nos. drawers of 1' 3" width on both side with necessary french polish hardware labour etc. as per site incharge 1 8390.00 NO

instruction and as per drawing ( Size 4' x 2'-6" x 2'-6", all framing other then legs are teak wood of size 2" x 1")

110 Providing & Fixing simple 12mm thick commercial plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock

or century) Rack of size 6' x4' and depth 1'-6" 5 Nos. horizontal partition, supported 2" x 1" framing with necessary

french polish hardware labour etc. as per site incharge instruction and as per drawing.

ITEM Qty Unit Total

1 Providing & Fixing fitting commercial 8mm thick plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) magazine stand of Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable lag support and horizontal

simple 2" x 1" teakwood patti for magazine support with necessary french polish hardware labour etc.as per site in

charges instruction and as per drawing.

112 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless

steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist 50 450.00 Kg

slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless

steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

113 Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I. or PVC pipes including the cost of

cutting holes & making good the wall etc. Complete - 100 mm dia as per architect instructions.

(A) 40 to 50 mm dia 10 62.00 No.

(B) 75 to 90 mm dia 10 75.00 No.

(C) 110 mm dia to upto 150 mm dia 10 90.00 No.

(C) 150 mm to 200 mm dia 10 98.00 No.

114 Providing and constructing sandwitch type Polish Kota Stone cooking platform 0.6 mt. wide & 0.75 mt. height,

including one end side Polish Kota stone (Double Polish) of 1.25 mt. height & front Polish Kota stone patti of 10 cm

wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing smooth with cement

slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and make with required all

fitings & fixitures etc. comp as per instruction given by site in charge at all floors.

115 Providing and constructing sandwitch type Granite stone cooking platform 0.6 mt. wide & 0.75 mt. height, including

one end side granite stone (Double Polish) of 1.25 mt. height & front granite stone patti of 10 cm wide, vertical

partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with finishing smooth with cement

slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and make with required all 2 3128.00 Rmt.

fitings & fixitures etc. comp as per instruction given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

116 Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / PVC)at junction of brick work and

RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before 10 102.00 S.M.

applying the plaster, including curing, scaffolding all complete as directed.

ITEM Qty Unit Total

1 Providing and filling Epoxy grout of approved or suggested brand by consultant / Engineer in charge in

4mm to 6mm thick tiles joint including spacer with cleaning of joint by vacuum or blower etc

118 Providing and fixing rebar of following diameter using chemical grout of Swanchore/Hilti/Fischer or

equivalent make including cost of all equipments, tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall be strictly followed, which shall be submitted and got

approved from the authority prior to start of work. The rate shall also include cost of drilling of hole of required

diameter and depth as mentioned in manufacturer's specification, cleaning the hole with required air blower and

other necessary tools and tackles, positioning, providing and grouting chemical, allied fixtures and fasteners, etc.

but excluding the cost of reinforcing bar etc. complete. Item includes necessary scaffolding, staging, labour, tools

and equipments, etc. complete as directed by the engineer-in- charge.

ITEM Qty Unit Total

1 Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite

control treatment including labour and material consistment with ISI specification. Using Chlordene and Chiorpurfiles

20 EC. As per 6131_paret-II Consentration Weight one percent is recommended i.e. one litre 20 EC

chemical emulsion with 19 liter give 1% concrentration inclusive of one litre chemical emulsion appication at the

rate of 5 litre chemical / Sqm of surface is recommended as per IS.

120 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter locked together through

their entire lenght and jointed together at the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation 1 3554.40 Smt.

including the cost of hood cover and spring etc. complete (A) Shutters having width below 3.5 M.

121 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter locked together through

their entire lenght and jointed together at the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation 1 4546.01 Smt.

including the cost of hood cover and spring etc. complete. (B) Shutters having width 3.5 M and above

122 Providing & Fixing 3 mm thick metal sheet with CNC cutting to fix it on vertical surface.Steel work welded

in built up sections, framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead

paint in beams & joists channels angles, tees, flats with connection plates or angle cleats as in main & cross beams, hip 2 2677.00 Smt.

& trussed purlins connected to common raffers & the like.

ITEM Qty Unit Total

1 Providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be

laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending them upto 15 cm along the wall clearing with water and

oxalic acid etc. as directed.

124 Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting, Welding & Fixing in

position Purlin, Main Chord etc. as per Engineer- in-charge.TATA / JINDAL / ASIAN Make

125 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 including neat cement finishing,

watering etc. complete.

126 Apply two coats of putty and two coats of primer of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free from mortar dropping and other matter and sand 50 40.59 S.M.

papered smooth.

127 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on

undecorated wall surface to give an even shade including throughly brushing the surface free from mortar 50 83.36 S.M.

droppings and other foreign matter and sand papered smooth.

For every subsequent coat Extra over item no.above 50 35.41 S.M.

128 Painting two coat (excluding priming coat) on new steel and other metal surface with synthetic enemal

paint, burshing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters. 50 68.57 S.M.

129 Providing & applying two coats of weather shield max paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can

be achieved by brushing with a wire/ stiff coir brush, followed by water jetting if required. Fill up all minor 50 82.00 S.M.

cracks and defects with white cement and sand mixture in the ratio 1:3. For application on previously painted wall,

previous coatings of paint must be thoroughly scraped off and Clean the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty is not

Minimum 4-6 hours duration is required between each coat of weather shield max paint

ITEM Qty Unit Total

1 Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 127mm x

38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt

1.205 kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm 5 2140.33 S.M.

@ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for window.

(A) Same as above but Colour anodized 5 2140.33 S.M.

ITEM Qty Unit Total

1 Providing and fixing window having extruded aluminium Powder Coated section frame main outer size 95 mm x

24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track member size 92 mm x

31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x

mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x

18 mm x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x 18 mm x 1.29 5 1591.87 S.M.

mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 5 1591.87 S.M.

132 Providing and fixing window having extruded aluminium Powder Coated section frame main outer size

x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track member size 61.85 mm

x 31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding shutters of horizontal

member size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member of 5 1705.67 S.M.

size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with powder coated aluminium fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc. complete for window.

(A) Same as above but Colour anodized 5 1705.67 S.M.

133 Providing and fixing standared extruded ofalluminium section of size 63mm x 38.10mm x1.2mm , @ Wt.

0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation with 5mm thick frosted glass as details etc 5 1175.56 S.M.

complete for Ventilation

(A) Same as above but Colour anodized 5 1175.56 S.M.

134 Providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of Jindal section

no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated alluminium frame with 5 mm thick transparent 5 1833.29 S.M.

bronze colour tinted float glass as details etc. complete for fix window.

(A) Same as above but Colour anodized 5 1833.29 S.M.

ITEM Qty Unit Total

1 Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with aluminium section of Hindalco,

Jindal , Narmada,Banco or Equivalent approved make having Poder Coated outer frame Leg Partition section of

63.50 mm x 38.10 mm having weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm ( top &

bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top

hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in

acid frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or archid make as approved by Engineer-in

charge including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 5 3237.00 S.M.

136 Providing & fixing Powder Coated Aluminium partly glazed and partly panelled partition using medium

duty sections of Hindalco,Zindal, Narmada, Banco or Equivalent approved make having section 63.50 mm x

38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float

glass of approved make including all other necessary fittings and fixtures. Entire work will have to be made water 5 2400.00 S.M.

proof using necessary rubber sectioned wherever required. Gaps all round the frame to be filled with approved water

proof sealent. Bottom portion of doors both side to be covered with 12mm thick prelaminated particle board of

approved make and quality and as per design.

(A) Same as above but Colour anodized 5 2400.00 S.M.

ITEM Qty Unit Total

1 Demolition & Recovery

137 Demolition including stacking of serviceable materials with all lead and lift. (i)) RCC Work 2 1110.75 C.M.

138 Demolition of brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable

materials with all lead and lift. (i) On Cement Mortar.

139 Removing and scraping of old deteriorated plaster of any thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site of work with all lead and lift.

140 Dismentling steel work including distempering and stacking the maerials with all lead and lift. 10 3.85 Kg.

141 Dismentling door, windows, ventilators etc. (wood or steel) shutters including chowkhats architraces, holdfasts and

other attacement etc. complete and stacking them within all lead and lift. (i) Not exceeding 3 Sq.M. in area. 2 197.09 EACH

142 Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc. stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift. (i) G.I. sheet roofing.

143 Removing of Collapsible Gate 1 101.00 No.

144 Removing of Rolling Shutter 1 101.00 EACH

145 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

A Kota stone flooring and steps 5 50.11 S.M.

B Marble 5 50.11 S.M.

C Tiles flooring / Dedo 5 50.11 S.M.

D Granite flooring and steps 5 50.11 S.M.

146 Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, ramming & consolidation etc. complete.

147 Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted thickness over the base including

necessary compaction, watering etc. complete. Item includes leveling by using vibratory plates compacted machine and 10 1016.00 C.M.

as directed by engineer in charge.

148 Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10- hand broken stone aggregates 40 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

ITEM Qty Unit Total

1 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x 380mm) purchased from SMC's

approved paverblock manufacturer & setting in line, level and in truly vertical position, including filling joints in C.M.

1:1 (1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) 50 228.00 R.M.

including watering etc. complete and as directed by engineer in charge.

150 Providing interlocking type Rubber moulded cement concrete paver block of approved shape, design & colour

having 60mm thickness (M-35) purchased from SMC's approved paverblock manufacturer only & fixing of fine sand

bedding. Item includes levelling by using vibratory plates compacted machine. Item also includes all materials, labour, 20 524.00 S.M.

equipments, tools, plants, watering, cleaning etc. complete. (With colour)

Without colour 5 524.00 S.M.

151 Providing & laying Granular sub base (GSB)confirming to Grading-V of Table 400.0 of compacted thick of

150mm with specified graded stone metal and sand mixed in place and laid with mechanical means spreading

with motor grader and compacting with vibratory roller having minimum 80-100 KN static weight to acheve 10 1469.00 C.M.

desired density of 98% of MDD including all material, labour, machinery with all leads and lift etc. complete.

152 Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 sand:3 graded stone agg. 20 mm nominal

size) & Vaccuum Dewatering technique including floating surface with a skim powder floater, curing etc. complete. 2 5981.00 C.M.

153 Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm nominal size)

& Vaccuum Dewatering technique including floating surface with a skim powder floater, curing etc. complete. 2 5245.25 C.M.

154 Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S Concrete 10 26.00 S.M.

155 Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with filling of epoxy sealent as directed by

engineer in charge

156 RCC Core Cutting is about making precise, circular cuts for creating holes of required diameters for Rehabilitation in

civil works. The core drilling rod is fitted with diamond pieces at the drilling end. The core cutting machine can be

used for both horizontal and vertical hole making purposes.

ITEM Qty Unit Total

1 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge &

mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate

ceiling tiles shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light

weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true

horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing

@120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get

required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced

between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of length 600mm

and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-

coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl 10 1648.96 Sqm.

plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling

using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm

centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with

polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-

charge.Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction

shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate

ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and

NRC for Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and

also having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

ITEM Qty Unit Total

1 GYPSUM CEILING

Supplying and Fixing of Suspended ceiling system components which includes Single Layer Boarding with 12.5mm

thick USG Boral Standard Plasterboard This includes of USG Boral Thundersteel Perimeter Channel (0.50mm thick

having one flange of 20mm and another flange of 30mm and a web of 28mm) screw fixed to brick wall/partition with Sq. Mt

the help of approved screws at 600mm centers. Then suspending of USG Boral Thundersteel Intermediate channel

(45mm x 0.90mm thick with two flanges of 15mm each) from the soffit at 1220mm centers with of USG Boral

Thundersteel Ceiling Angle (25x10mmx0.50mm thick) fixed to RCC Slab with of USG Boral Soffit Cleat

(37x27x25x1.6mm thick) and 8mm dia 40mm long Anchor Fastener @ 600mm Centers, respectively. USG Boral

Thundersteel Ceiling Section (having web of 51 mm and two flanges of 27mm each) are then fixed to the of USG Boral

Thundersteel Intermediate channel with the help of connecting clip (2.6mm Dia) and in perpendicular direction to the

USG Boral Thundersteel intermediate channel at 457mm centers. USG Boral Thundersteel profiles are rolled with AZ

Steel (150 GSM & 310 MPa Yield Strength) having base metal conforming to IS 513:2016 as per IS 15961:2017/ AS

1397:2001).12.5mm thick USG Boral Standard Plasterboards (confirming to IS 2095 Part 1) is screw fixed with 25mm

long Drywall screws at 230 mm centers. The screw fixing of gypsum boards to the metal framing at the periphery,

openings and cut edges should be at 150mm centers.All the Gypsum boards must be staggered. All joints to be taped &

finished with USGBORAL Paper tape & All-Purpose Joint Compound confirming to ASTM C475. Material certificate

to be provided by company. and approved surface design in suspended grid with all material, making of coves for

indirect lighting ,grooves,cutting and labour,scaffolding, and as per instruction of engineer and as per detailed drawing

& image as directed by the Architect and as approved by the Engineer in Charge.

ITEM Qty Unit Total

1 CEMENT SHEET CEILING

Providing and fixing of Cement sheet ceiling using aluminium channel & pipe, screws etc. complete with all material,

labour with all lead, lift and transport. and finished by approved shade of plastic paint (Basic Rate for 8 mm plain

cement sheet : 35 rs./sqft.)and finished and complete the work satisfactorily as per instruction of architect or Engineer-

in charge And as per " Architecture" detail.

160 Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 5.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

161 Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 5.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 5.00 182.32 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 5.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 5.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 5.00 327.83 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 5.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS 304 Grade 5.00 54.78 No.

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 5.00 76.17 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 5.00 873.05 No.

(J) Inter Lock [Kadaka lock] 5.00 209.71 No.

(H) Locks Godrej Mortice lock cover 5.00 329.63 No.

(I) Door closers arrow type with spring 12 length as approved sample (30 cms) 5.00 479.33 No.

(J)Handle for doors Windows Cupboards etc. Brass 15 cms. Length 5.00 59.91 No.

(K) S.S. Door / window hinges 4x1"x1" 5.00 54.78 No.

162 Providing & fixing water proof plywood (ISI marks 710 grade) at the door,window and any space in the building.

necessary hardware,screws materials etc. complete as per instruction by engineer in charge.

ITEM Qty Unit Total

163 Providing & laying Non reflective solar contact film for fixing on glass as approved colour,design,cutting complete as

per instruction by engineer in charge.

164 Providing & fixing Glass Table Top using 08mm th.clear glass with crystal edge & necessary hardware materials etc.

complete as per instruction by engineer in charge.

165 Removing & resetting existing readymade c.c. kerb stone of required size & thickness in line .level and in truly vertical

position including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement : 1 part of coarse sand) including watering etc. complete and as directed by engineer in charge. (M.R)

166 Removing and Resetting of Paver block of walk-way with necessary sand / pana filling and make in line and level with

necessary vibrating using compactor machine.

167 Providing and fixing hard drawn steel wire fabric 75mmx25mm mesh or weight not less than 7.75 kg.per Sq.M. to

window frames etc. including 60x 20mm beading of teak wood.

168 Providing & fixing G.i mesh 25X25X3mm used for celling repair fixed with celling rebar column as per directed by

enginner incharge rate excluding the rebar cost .

169 Providing and filling the expansion joint by polymer confirm to BS4254-1983 as per required shade and specification

by making groove of 50 mmx12.5mm lather by cutting or by repairing groove and removing mortar dropor anyother

foreign materials including applying primer and filling required size (over size of joint PU foam etc. complete.)

170 Cutting out cracks of roof terrace to V- section , cleaning out, wetting , grouting with cement and sand slurry

1:3 (1-cement 3-sand )

171 Cutting out cracks roof terrace to V-Section cleaning out and filling solidly with a hot mixture of bitumen

and clean dry sand (1:1 by weight)

ITEM Qty Unit Total

1 Anti-Termite System:Providing and laying of permanent

172 piping technology anti-termite treatment

before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every 30 cm interval in the tube, having working pressure of

2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at the

entire periphery of the building and at internal network of building at a depth of 20 to 200 mm under floor at every

to 3 mtr. c/c distance (adjusted as per building layout ) & Ends of loop pass through a PVC elbow of minimum 10.00 134.33 S.M.

32 mm ID at junction box of wall and floor level, entering into a steel reinforced grooved flexible pipe of

minimum 22 mm ID leading into junction box and the loops shall terminate in junction boxes & test every

junction during injecting chemicals for termite control treatment. The anti termite chemical Imidacloprid

30.5% SC mix as per IS-6313 (part III) shall be injected by the pressure pump diluted with water @ 10.5 ml/5 ltr

of water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line plan for piping

173 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional 5 4,021.02 C.M.

Extra for brick work in superstructure above plinth level upto floor two level (B) Conventional 2 274.97 C.M.

Extra for brick work in superstructure above floor two level Item No. 2(6.13) (B) Conventional per floor

174 Half brick masonry in common brunt clay building bricks having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in foundation and plinth (B) Conventional 10 599.84 S.M.

Extra for half brick masonry in superstructure above plinth level upto floor two level. (B) Conventional 5 53.17 S.M.

Extra for half brick masonry in superstructure above floor two level.(B) Conventional 5 6.00 S.M.

174 Providing flush cock consisting lever, cartridge sleeve & flange & concealed part, Make- Cera EXPOSED PART

F2013751 & Concealed part F4060101 ,Parry ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED

BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK F850105

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 ,Parry ware T9824A1&T9823A1, Jaquar FLR

5083 KN , CONCEALED BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK F850105 2 2,110.00 R.M.

175 Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter chrome plated PVC Hose Pipe

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587 ,HindWare F160109 2 971.00 No.

ITEM Qty Unit Total

1 Extra for additional height of propping and centering where the height of propping and centering exceeds 4 .O M

between supporting floor to ceiling including temporary brick or stone pillars for supporting as required. (iii) Height 5 579.03 Smt.

more than 6.0 M. and upto 7.0 M

177 Applying priming coat over new steel and other metel surface after and including preparing the surface by throughly

cleaning, oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper 50 34.68 S.M.

with ready mixed priming paint brushing red lead.

178 Providing and laying Wet Mix Macadam with paver finisher in specified thickness, each layer not exceeding 200 mm

compacted thickness including premixing in WMM plant with well graded crushed stone aggregate, with watering and

spreading by mechanical means to required profile and compacting by vibratory roller of minimum 80-100 kN static

weight to achieve desired density of 98% of MDD including all material, labour, machinery, test with all leads and lifts

etc.,complete as per details in tender specification & as directed by engineer in charge.

179 Providing and fixing Galvanized Steel Chain on compound wall including all cost of material, labour, and painated

with synthetic enamle paint etc.as per decided by Engineer-in-charge.

180 Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild steel tubes (medium grade) TATA /

ZENITH / ASIAN / JINDAL MAKE of the following nominal bore, tube, fittings & clamps incl. making good the wall 1 141.58 Rmt

ceiling and floor etc. complete. (A) 15 mm. dia.

181 Providing and Fixing SS Motor Filter having Size 15"x9"x8" as per instrution of Engineer-in-charge. 1 3,722.00 No.

Supply, Installation and Testing of: Nozzel with necessary accessories

MOC:-Brass Nozzel

Standard: ISI Marked.

UOM:-Price Per Each No.

183 Supply, Installation and Testing of Manifold Fountain - 3 Line GI with all necessary acessories as per Instruction by

Engineer-in-charge.

ITEM Qty Unit Total

1 FLAT GLASS'Fabrication, Supply, installation, Testing, protection, cleaning & handover of Aluminium Window

Sections 1.5mm thick of approved make in 6063 Alloys as per Consultant / Engineer-In-Charge approval Using grid

work of prefabricated aluminium extruded sections to with stand the design wind pressure confirming to IS-875 part

III.Screw & bolts of approved make in SS 316,20-22 Micron Champion Gold Anodizes Sections. The 11mm thick

Laminate Glass Unit (5mm Blue Tinted Glass + 0.76mm EVA (ETHYLENE VINYL ACETATE) + 5mm Reflective 2 6,670.00 SM

Royal Opal Blue Glass) glass (INTERLAYERS FILM TO LAMINATE BOTH GLASSES) Make by : KT-455, AIS,

Gold Plus, Saint- Gobain or Equivalent. The single barrier gasket system consists of 1 barrier of EPDM gaskets to

achieve the required compression & seal in the system. EPDM Gaskets shall be of micro cured (Online Curing) with

shore A hardness of 60-65. (Make: OSAKA or quivalent) Locking System - For Flat Glass

185 BEND GLASS-'Fabrication, Supply, installation, Testing, protection, cleaning & handover of Aluminium Window

Sections 1.5mm thick of approved make in 6063 Alloys as per Consultant / Engineer-In-Charge approval Using grid

work of prefabricated aluminium extruded sections to with stand the design wind pressure confirming to IS -875 part

III.Screw & bolts of approved make in SS 316,20-22 Micron Champion Gold Anodizes Sections. The 11mm thick

Double glass unit (5mm Blue Tinted Glass + 0.76mm EVA (ETHYLENE VINYL ACETATE) + 5mm Reflective

Royal Opal Blue Glass) glass (INTERLAYERS FILM TO LAMINATE BOTH GLASSES) Make by : KT-455, AIS,

Gold Plus, Saint- Gobain or Equivalent. The single barrier gasket system consists of 1 barrier of EPDM gaskets to

achieve the required compression & seal in the system. EPDM Gaskets shall be of micro cured (Online Curing) with

shore A hardness of 60-65. (Make: OSAKA or quivalent) Locking System - For Bend Glass

186 Providing and laying Brick cladding (Red teracotta, 9" x 3", 20mm) on 12mm thick cement sheet suspended with

aluminium hollow section of 50mm x 25mm x 2mm with necessary adhesive material (Mapei or equivalent) and water

repellant treatment on brick cladding (Zycosil or equivalent), It includes scaffolding, cost of labour, material,

accessories, adhesive, scaffolding, wastages, transport, taxes, fixing into a neat finish in aesthetic point of view, without

any undulations in facias all complete as per drawing and instruction of Engineer-in-charge.

ITEM Qty Unit Total

1 Providing and laying Brick Cladding on wall (Red teracotta, 9" x 3", 20mm) with necessary adhesive material (Mapei

or equivalent) and water repellant treatment on brick cladding (Zycosil or equivalent). It includes cost of labour,

material, accessories, adhesive, scaffolding, wastages, transport, taxes, fixing into a neat finish in aesthetic point of 2 2,141.00 SM

view, without any undulations in facias all complete as per drawing and instruction of engineer incharge.

188 Providing & fixing Table Top Basin including all the accessories, adhesive, transport, cutting and making good the

wall without any undulations in facias where required as per drawing and instruction by Engineer-in-charge. Size: 1 6,460.00 No.

500x425x130mm, Make: Jaquar

189 Providing & fixing Battery Operated Sensor Concealed Type Flushing Valve for Urinal Complete Set with Installation

Box with Control Cock including all the accessories, adhesive, transport, cutting and making good the wall without any

undulations in facias where required as per drawing and instruction by Engineer-in-charge. Make: Jaquar

190 Providing & fixing Chrome Finish sensor faucet for wash basin including all the accessories, adhesive, transport,

cutting and making good the wall without any undulations in facias where required as per drawing and instruction by 1 7,940.00 No.

Engineer-in-charge. Make: Jaquar

191 Providing & applying Exterior matt Texture as per design, as per manufacturers specification and directions at all

floor levels of approved quality on exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects, manufacturers and as per the instruction of engineer in

charge etc. complete.

192 Decorative theme base designing & painting with all waterproof materials 10 684.66 No.

193 Providing & laying various waterproofing materials on various surfaces i.e ACP sheet, glass roof etc. as approved

colour, brand complete as per instruction by engineer in charge.

(a)Water proofing materials silicon baseWater repellent compund 10 245.00 Ltr

(b)Water proofing materials of polyarethine on Elepantic base 10 540.00 kg

(c)Water proofing materials of polyarethine on Aromatic Base 10 375.00 kg

194 Welding Charge 10 600.00 Rmt.

195 Hoarding Printing and Mounting 10 16.50 Sft.

Flex Banner (Any size 240 gsm) 10 8.50 Sft.

Flex Banner with MS (Mild Steel) framing (Any size 240 gsm (Pipe size 25 x25x1.5 mm) 5 53.10 Sft.

ITEM Qty Unit Total

1 Cloth Banner (Upto 8 x 4 feet 140 gsm) 5 23.60 Sft.

Cloth Banner with MS (Mild Steel) framing (Up to 8 x 4 feet 140 gsm) (Pipe size 25 x 25 x 1.5 mm) 10 65.00 Sft.

Cloth Banner with Wooden stick at both end for rally display (Any size 140 gsm) 5 32.85 Sft.

Cloth banner standee (Any size 140 gsm Pipe size 25 x 25 x 1.5 mm) 10 69.50 Sft.

Wall Vinyl Sticker S 5 28.00 Sft.

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 5 38.00 Sft.

Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 5 22.00 Sft.

5mm PVC sheet Eco Vinyl (Any size) 5 55.46 Sft.

199 GLASS PARTITION WITH FILMWORK

Providing and fixing of full height saint gobain glass partitions (AS PER DRAWINGS) using patch fitting / U-

channels, 12mm clear toughned glass,film work as per drawing including all hardware items,silicon,etc with all

material, labour,cutouts,edge polish , lead and wastage etc. and complete the work satisfactorily as per instruction of

architect or Engineer-in charge. *MATERIAL SHOULD BE FIRE RESITANCE WITH CLASS - 1 FIRE RATING

*MATERIAL SHOULD BE GREEN CERTIFIED AND SHOULD PROVIDE CERTIFICATION BY

CONTRACTOR. MAKE:- (ais,modiguard,Saint-Gobain) or equivalent hardware make:- ( ebco, enox, dorma)

200 SINGLE DOOR SIZE(1.20X2.50)WITH FIXED GLASS

TOP(1.20 X 0.75 to 1.05) Providing and fixing 12 mm tk of toughned GLASS DOORS using Dorma Xl-C 4001 Glass

Door PKG EN 3(Top Patch-1, Bottom patch-1, Floor Spring-1, Corner Lock-1); Dorma Xl-C 4003 A Patch fitting for

overpanel and sidelight; Dorma Xl-C 4004 A Connector for overpanel and Sidelight; Dorma Xl-C 4006 Central

Connector; Dorma Xl-C 4008 Side Connector; Dorma Xl-C 3000 H Type Handle 400x22 CTC 300, AND AS PER

DRAWING including all acceessories, locks, material, silicone,labour,installation, Hole & slote charges etc. and 1 46,678.90 Nos.

complete the work satisfactorily as per instruction of architect or Engineer-in charge. *MATERIAL SHOULD BE

FIRE RESITANCE WITH CLASS - 1 FIRE RATING *MATERIAL SHOULD BE GREEN CERTIFIED AND

SHOULD PROVIDE CERTIFICATION BY CONTRACTOR. MAKE:- (ais,modiguard,Saint-Gobain)or equivalent

hardware make:- ( ebco,enox,dorma)

ITEM Qty Unit Total

1 SINGLE DOOR SIZE(0.90 X 2.50)WITH FIXED GLASS TOP (0.90 X 0.75 to 1.05) Providing and fixing of 12 mm

tk toughned GLASS DOORS using Dorma Xl-C 4001 Glass Door PKG EN 3 (Top Patch-1, Bottom patch-1, Floor

Spring-1, Corner Lock-1); Dorma Xl-C 4003 A Patch fitting for overpanel and sidelight; Dorma Xl-C 4004 A

Connector for overpanel and Sidelight; Dorma Xl-C 4006 Central Connector; Dorma Xl-C 4008 Side Connector;

Dorma Xl-C 3000 H Type Handle 400x22 CTC 300 AND AS PER DRAWING including all acceessories,locks, 1 42,188.99 Nos.

material, silicone,labour,installation, Hole & slote charges etc. and complete the work satisfactorily as per instruction

of architect or Engineer-in charge. *MATERIAL SHOULD BE FIRE RESITANCE WITH CLASS - 1 FIRE RATING

*MATERIAL SHOULD BE GREEN CERTIFIED AND SHOULD PROVIDE CERTIFICATION BY

CONTRACTOR. MAKE:- (ais, modiguard, Saint-Gobain) hardware make:- (ebco, enox, dorma)

202 GRID CEILING Providing and fixing AMF ThermatexStar Mineral Fibre Ceiling Tiles, 15 mm thick with VT15 Edges

of size 600 x 600 mm in true horizontal level suspended on Knauf AMF STAR inter locking metal grid of hot dipped

ITEM Qty Unit Total

1 of size 600 x 600 mm in true horizontal level suspended on Knauf AMF STAR inter locking metal grid of hot dipped

galvanised steel sections (galvanized @ 50-60 gsm/sqm) consisting of Main "Tee", size 3600x15x38H mm made from

0.35 mm thick (minimum) sheet spaced at 1200mm centre to centre and Cross "Tee", size 1200x15x42 Hmm made of

0.35 mm thick (minimum) sheet to be interlocked between the main T runners at the distance of 600mm centre to

centre to create 1200x600mm module. Cross "Tee", size 600 x15 x42 Hmm made of 0.35 mm thick (minimum) sheet

to be interlocked at middle of the 1200x600mm module to form grids of 600x600mm to lay ceiling tiles of approved

surface pattern in the grid including, wherever required, cutting / making, opening for services like diffusers, grills,

light fittings, fixtures, smoke detectors etc. The perimeter trims to be of 22W x 19H x 3000L and 0.50 mm thick. Main

"Tees" to be suspended from ceiling using 6mm dia and 50mm long anchor fasteners, AMF SoH suspension

hangersconsisting of 4.00mm GI adjustable rods with galvanized level clips spaced at 1200mm centre to centre along

the Main Tee.The 4.00mm GI rods should be in accordance to IS 280:2006 and should have a zinc coating of not less

than 90 gsm in accordance with IS 4826:1986 and a tensile strength of 300-550 MPa in accordance to IS 1608:2005.

The first suspension from the perimeter trim should not exceed 300mm.The mineral fibre ceiling tile shall be “AMF 20 1,035.25 Sq.Mt.

ThermatexStar” firmly bonded wet-felt mineral wool tiles as per EN13964, primed on both sides and appropriately

finished on the visible side in white color similar to RAL 9010. The tiles are asbestos and formaldehyde free. The

classification of building materials is approved by the “General Approval of the Building Authorities” issued and

monitored by the German Institute for Civil Engineering.The mineral wool used for producing the tiles should be bio-

soluble and biodegradable and rated as non-carcinogenic according to the EU-directive 97/69/EG (note Q). The quality

of the mineral wool used for producing the mineral fibre board should being ensured and monitored by the “RAL-Seal

of Approval Mineral Wool”.The mineral tiles should have been awarded the ecolabel “Blue Angel” (RAL-UZ132) and

are therefore ecofriendly. Acoustic properties: NRC:>0.65 it has to achieve .including scaffolding,and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

*MATERIAL SHOULD BE FIRE RESITANCE WITH CLASS - 1 FIRE RATING *MATERIAL SHOULD BE

GREEN CERTIFIED AND SHOULD PROVIDE CERTIFICATION BY CONTRACTOR. MAKE:- ( AMF

THERMATEX, ARMSTRONG, knauf danoline)

ITEM Qty Unit Total

1 Providing & fixing 12mm clear glass work with Curtain wall glazing system work with all necessary fixtures & fittings

etc,complete. Glass make of Modi guard/ASAI/ Saint Gobain and alum section make of jindal, banco or similar with

Anodized aluminum mullion 165mm x 57mm x 3mm and Anodized aluminum transom 101mm x 57mm x 2mm and

Anodized aluminum cover cap 57mm x 18mm x 1.3mm, alum section make of jinadal, banco Aluminium pressure

plate, fix with EPDM rubber ,with all SS hardware and MS bracket and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

204 Providing & fixing 6 mm ref. glass work with Curtain wall/Semi Unitised system with spandril panel work with all

necessary fixtures & fittings etc. complete. Glass make of Modi guard/ASAI/ Saint Gobain and alum section make of

jindal, banco or similar with, Anodized aluminum mullion 100mm x 55mm x 1.5mm and Anodized aluminum transom

100mm x 55mm x 1.5mm and Anodized aluminum subframe 55mm x 15mm x 1.2mm, fix with fix with Spacer Tape

Norton or 3M, EPDM rubber,Sticking sealant DC 795 and Weather Sealant DC 789, with all SS hardware and MS 10 5,826.00 Sq.Mt.

bracket along with spandrel panel as per design with glass wool insulation of 50 mm thick 48kg/m3 density slab with

inbuilt black veil firmly held on the GI tray of 0.5 mm the will all fittings and fixture req and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

205 Masonary work using Aerated Light weight concrete block having crushing strength not less than 35 kg/sqcm for super

structure above plinth level upto all floor level in cement mortar 1:5 (1 cement : 5 fine sand ) complete as per Technical

Ground Floor 2 4,516.97 C.M.

First Floor 2 4,550.70 C.M.

Second Floor 2 4,584.43 C.M.

Third Floor 2 4,618.17 C.M.

Fourth Floor 2 4,651.90 C.M.

Fifth Floor 2 4,685.64 C.M.

Sixth Floor 2 4,719.37 C.M.

Terrace & Stair cabin floor 2 4,753.10 C.M.

LMR floor 2 4,786.84 C.M.

ITEM Qty Unit Total

1 Aluminium Composite panelling to drop-fin and front column,etc: Supply & fixing of Aluminium Composite Panel

(ACP), 4 mm thick in required colours for interiors/exteriors consisting of two layers of aluminium skins of 0.25 mm

thick sandwiching a thermo plastic core in continuous lamination process with PVDF coating for interior/exterior

grades ensuring long colour and no fungal attacks. Base frame work with aluminium sections of 65mm x 25mm shall be

fixed over the brick work and the above aluminium panels shall be fixed to the frame work as cladding with material:- 10.00 2,232.14 Sq.Mt.

silicone dowcorring 789 weather silicone in 995 dow corring. It includes cost of labour, materials, accessories,

adhesives, scaffolding, wastages, transport, taxes, fixing into a neat finish in aesthetic point of view, without any

undulations in facias all complete as per drawing and Instruction of engineer incharge. for all floor

207 Fixing clerestory window chowkhats in existing openings including cutting masonry for hold fasts, embedding

hold fasts in cement concrete blocks with cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone 1.00 399.00 Nos

aggregate 20 mm single size), painting two coats of coal tar to sides of chowkhats and making good the damge to

walls complete including disposal of rubbish to the dumping ground within 50m lead.

208 Providing and applying cement mortar (1:3) modified by using polymer and expanding grout additives at 25mm

thickness for repair/strengthening of various RCC elements at all floor levels, lead, lift, including breaking, chipping,

dismentling existing cover concrete and exposing existing reinforcement, applying wirebrush for making surfaces of

steel and concrete free from rust and other loose materials, applying rust removing chemical on existing reinforcement, 1.00 1,208.00 Sq.mt

applying anti- corrosive coating on existing reinforcement, applying polymer bonding agent on existing concrete

surfaces before applying polymer modified mortar in specified thickness as directed by the Engineer-in-charge.

209 Providing and applying cement mortar (1:3) modified by using polymer and expanding grout additives at 50mm

thickness for repair/strengthening of various RCC elements at all floor levels, lead, lift, including breaking,

chipping, dismentling existing cover concrete and exposing existing reinforcement, applying wirebrush for

making surfaces of steel and concrete free from rust and other loose materials, applying rust removing chemical 1.00 2,348.00 Sq.mt

on existing reinforcement, applying anti- corrosive coating on existing reinforcement, applying polymer bonding

agent on existing concrete surfaces before applying polymer modified mortar in specified thickness as directed

by the Engineer-in-charge.

210 Pointing on brickwork with cement mortar 1:1 (1-cement : 1-

coarse sand) (B) Ruled pointing.

ITEM Qty Unit Total

1 Aluminum section Window opening and refixing with all

necessary fix & fiting etc maid in wisely.

212 Apply hacking on RCC member manual or by mechanical as discoused by engineer incharge. 350 - 400 notches

(dents) per sqmt. Process of making the back ground rough before plastering for better bonding of mortar with 50.00 20.00 Sq.mt

213 Polishing flooring after repair work done as direct by E.I.C 10.00 172.00 Sq.mt

214 Providing & Fixing Nylon net (having net weight-0.065 kg/sq.mt) in outside as well as inside plaster / terrace

water proofing at any height (no load or lift will be paid for the same) etc as direct by E.I.C

215 Carrying out Injection grouting for cracks in RCC structural members by drilling holes of 15 mm diameter upto

minimum depth of 75 mm, fixing aluminium nozzle / rubber pipe using non-shrink epoxy putty, injecting epoxy

grout material at specified pressure with grouting pump till it the material refuses to impregnate inside the hole. If

required or suggested by the Engineer-in-charge, injection grouting shall be carried out more than once for a hole

to assure proper spreading of grout material and filling of capillaries / voids within the element. After satisfactory

injection grouting, the nozzle/pipe shall be cut and sealed by non-shrink epoxy putty.

The surface shall be finished smooth with C:M (1:4) and reinstated to the original condition as directed by the

Engineer-in-charge.

The rate shall include the cost of providing and supplying all tools, materials, labour, scaffolding, props, formwork,

etc. complete. The make and quality of epoxy grout, epoxy putty, etc. shall be approved by the Engineer-in-

charge. The procedure for application shall be strictly in accordance with manufacturer's detail

specification, which shall be submitted before start of work and shall be approved by the Engineer-in-charge.

(Actual no of holes and their locations shall be as decided by the Engineer-in-charge)

ITEM Qty Unit Total

1 Providing and applying cement mortar 1:4 enriched with expanding grout additive in required proportion in cement for

repair of cracks in RCC and non-RCC members after making 25mm x 25mm groove, cleaning the surface and applying

coat of bonding, finishing smooth the repaired surfaces, providing and applying curing agent on the repaired surfaces,

etc. complete at all floor levels as directed by engineer-in-charge. The make and quality of expanding grout additives, 5.00 120.00 Sq.mt

bonding agent, curing agent, etc. shall be approved by the engineer-in-charge. The procedure for application shall be

strictly in accordance with manufacturer's detail specification, which shall be submitted before start of work and shall

be approved by the Engineer-in-charge.

Total (Amount put to Tender) Rs.

Add 18.00% GST Rs.

Say NET ESTIMENT Rs.

Add 5.00% Conti. Rs.

Add 2.00% W.C. Rs.

Say GROSS ESTIMENT Rs.

Assitant Engineer Dy. Engineer

DREAM City Limited DREAM City Limited