Works Advertised Tender for Laying of 185/ 240 SQMM U/G cable with cable joints work for Any s/dn under Dabhoi division under ND & other schemes

Works Advertised Tender for Laying of 185/240 SQMM U/G cable with cable joints

work for Any s/dn under Dabhoi division under ND & other schemes

SR. Estimated Rate in Amount in

Item Code No. Description of Work Unit

NO Quantity Rs. Rs.

Excavation of trench 0.5Mtr. Wide and 1 Mtr. Deep for laying of HT/LT underground

cable of size upto 300 Sq.mm PILC or XLPE.(The cable should be laid on bed of sand

and to cover cable with half round RCC pipe 6" internal dia and length of one meter

along with each bottom and top.) The entire trench there after should be refilled with

earth dully rammed up to ground level As per Drg.No MGVCL/Tech/UG Cable/01/12-

Excavation of trench 0.75Mtr. Wide and 1 Mtr. Deep for laying of double HT/LT

underground cable of size upto 300 Sq.mm PILC or XLPE.(The cable should be laid

on bed of sand and to cover cable with half round RCC pipe 6" internal dia and length

of one meter along with each bottom and top.)The entire trench there after should be

refilled with earth dully rammed up to ground level As per Drg.No MGVCL/Tech/UG

Laying/Relaying of cable in Cable trench & from ground level to pole structure for

providing outdoor cable joints.

Laying / Relaying XLPE/PILC cable by digging of pits,

removal of old cable and laying of new cable on sand bad.

Widening & refilling with earth dully rammed the trench

for laying additional No. of cable. For item no: 1 above.

Add : Charges for digging of tar road for laying of cables

over and above digging of pit in normal soil as per Sr No:

Laying of U/G 11KV XLPE cable by Push & Pull method

(MANUAL/By Horizontal Directional Machine))thru with HDPE pipe110mm

7 9913000042 Diameter,5.3 to 6mm thickness or 4" diameter GI Pipe without damaging surface of 1400 MTR 456

the road by horizontal boring / drilling method (Excluding cost of HDPE pipe or 6" or

4"GI Pipe) as per Drawing and specification

8 411000015 Supply of INDOOR CABLE BOX FOR 185 MM2 CABLE 20 Number 1445

9 411000006 Supply of OUT DOOR CABLE BOX FOR 185 MM2 CABLE 20 Number 1073

Supply of STRAIGHT THOUGH JOINTS FOR 185 MM2 CABLE RURAL AREA

11 0411000015 Supply of INDOOR CABLE BOX FOR 240 MM2 CABLE 20 Number 877

12 0411000006 Supply of OUT DOOR CABLE BOX FOR 240MM2 CABLE 20 Number 1076

13 0411000074 Supply of STRAIGHT THOUGH JOINTS FOR 240MM2 CABLE RURAL AREA 20 Number 2820

Moulding of cable joints (St. Joint, Indoor & Out door) for XLPE cable-Labour charges

Moulding of cable joints (St. Joint, Indoor & Out door) for XLPE cable-Labour charges

Supply of HDPE pipe for Laying 11KV XLPE cable 110 mm nominal Diameter &

to 6 mm thickness as per IS:

17 9913000005 Supply of half round RCC hume pipe 6" internal dia & length of 1 Mtr. 500 Number 100

Supply and Laying of medium grade GI pipe of size 4" dia INCLUDING CLAMPING

OF CABLE WITH PIPE.

Supply of sand 0.300x0.500X1.00mtr (Layer at bottom of cable trench approximately

0.15cmt) As perDrg.No MGVCL/Tech/UG Cable/01/12-13

Supply of sand 0.300x0.750X1.00mtr(Layer at bottom of cable trench approximately

0.225cmt) As perDrg.No MGVCL/Tech/UG Cable/02/12-13

Providing & supplying, fixing route marker of C.C.1:2:4, 150mm x 150mmx750mm

concrete stone (MGVCL marked with approved yellow colour) embedded in Earth at

21 9913000009 least 300mm below the G.L. & 450mm above G.L. at distance approx. 100 Mtr. or as 10 Number 143

directed by engineer incharge.(This Includes material & Labour charges for excavation

9902020010 ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF

AB SWITCH, HG FUSES, 9 & 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILING OF EARTH, FIXING OF CHANNELS,

SUPPORTING ANGLE CLAMPS, ANTI-CLIMBING DEVICES , DANGER

22 BOARDS, INSULATORS, ETC., COMPLETE AND PAINTING OF POLES 15 Number 4171

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

23 9903000007 Laying of 185/240 SQMM XLPE Cable ON OVERHEAD HT LINE poles 5 Per Km 70320

IN SCHDULE ''B'' MENTIONED QUANTIES ARE ESTIMATED. QUANTIIES MAY BE INCREASED OR DECREASED IN EVERY

WORKS. BUT ORDER VALUE WILL NOT BE CHANGED & PAYMENT WILL DONE AS PER ACTUL EXECUTION OF WORKS

2 In case any joint fails within one year due to poor workmanship,it should be replaced free of cost by you else, the charges for the same will be deducted from your bill.

The above tender is mainly ment of replacement of failed Indoor/Out door joints, So agnecy has to provide joint replacing gang in immergency as soon as and as and

3 when required by subdivisions under Dabhoi Division.

For laying of double circuit, both cables should be covered with separate RCC hume pipe of 6"diameter OR Provided HDPE Pipe for laying 11KV cable. Pipe should be

4 10mm thickness.

5 If the work of cable would not be started within six hours from verbal instruction of Engineer-in-charge from sub-division, the penalty will be charged @ Rs.200/- per

6 As per Corporate office circular number:MGVCL/CE(T&O/Tech/816 dt: 18.03.17 the workman ship to be done as per REC standard. Certificate of Engineer/Linestaff duly

7 GST Registration number to be produce and will be applicable as per prevailing Government Rates.

8 The maintenance work, 20% of tender value must be carried out along with the other scheme wokrs.

SIGNATURE OF CONTRACTOR EXECUTIVE ENGINEER DABHOI

(With Rubber Stamp & Date) DIVISION MGVCL