Renovation of Conference Hall at Collectorate Palakkad

Amount

RENOVATION OF CONFERENCE HALL AT COLLECTORATE PALAKKAD

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

12.34 : Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183, density 24 kg/m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire and mesh, for top most ceiling of building .Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183, density 24 kg/m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire meh of 12.5 mm x 24 gauge wire and mesh, for top most ceiling of builing .

12.45.4 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:Fully Perforated Gypusm Plaster Board of size 1200 x 2400 x 12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer - in- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60.

13.88 : Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od279121/2021_2022 : Providing and fixing Dais made of a combination of 25mmx25mm M/S frame work and top portion covered by BWR grade , 12 , mm plywood with synthetic Pvc Floorng of approved quality and make; .The rate shall include all other necessary hardware materials and labour charges etc.

od279127/2021_2022 : Providing and fixing Flush Door in position overlaid with 1mm laminate including vision panel,Tower bolt hinges etc Rate quoted shall include all material, labour charges, cost of conveyance etc

9.83 : Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

od279128/2021_2022 : Supplying and fixing full height wooden Paneling with 12mm BWR plywood on either side of Plywood frame work and all exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade. Including all materials and labour charges etc.

od279135/2021_2022 : Providing and fixing in place table of size 5200 mm x 600 mm x 750 mm made of a combination of BWR grade 6 mm, 12 mm and 16 mm plywood of approved quality and make; All exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table shall be finished with 0.8mm laminate. The rate shall include all other necessary hardware materials and labour charges etc

od279138/2021_2022 : Providing and fixing in place table of size 7200 mm x 600 mm x 750 mm made of a combination of BWR grade 6 mm, 12 mm and 16 mm plywood of approved quality and make; All exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table shall be finished with 0.8mm laminate. The rate shall include all other necessary hardware materials and labour charges etc

od279149/2021_2022 : Supplying and fixing 2mm textured wood grain polyvinyl chloride flooring including all material and labour charge etc

od279150/2021_2022 : Supplying and fixing decorative washable wallpaper including all material and labour charge etc

od279151/2021_2022 : Supplying sofa 1 Seater including all materials and labour charge etc.(DC Room)

od279152/2021_2022 : Supplying sofa 3 Seater including all materials and labour charge etc.(DC Room)

od279153/2021_2022 : Supplying Medium back chair with S type metal legs ( for Visitors DC Room)

od279658/2021_2022 : Supplying Orient High back net chair including all materials and labour charges etc

od279659/2021_2022 : Supplying Orient medium back net chair including all materials and labour charges etc

od280104/2021_2022 : Supplying Medium back chair with m/s powder coated frame with mesh back including all charges etc (Conference Hall area)

od279154/2021_2022 : Providing and fixing Side Return Table of size1200 mm (l) x 400mm (w) x 650 mm (h) shall be formed out of 18 mm thick BWR Plywood with 1mm laminate and all exposed edges lipped with PVC edge banding. Inside portion of the Table will be covered with0.8mm laminate .Rates include all materials and labour charges etc (DC Room)

od279155/2021_2022 : Providing and fixing in place Executive Table of size 3000 mm x 750 mm x 800 mm made of a combination of BWR grade 6 mm, 12 mm and 18 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware,materials and labour charges etc.(DC Room)

od279156/2021_2022 : Supplying and fixing large size 1.2 (h)x 0.6 (w) framed print on wall including all materials and labour charges etc

od279157/2021_2022 : Supplying indoor plants including all materials and labour charges etc

od279159/2021_2022 : Supplying and fixing Government of Kerala Logo with Stainless Steel base and sinage letters of size 70mm with Acrylic sheet including all materialsand labour charges etc

od279160/2021_2022 : Engaging Labour for dismantling the existing partition, ceiling and door etc

od279161/2021_2022 : Providing and fixing in place Centre Table of size 900 mm x 450 mm x 450 mm The rate will include all other necessary hardware,materials and labour charges etc.(DC Room)

od279916/2021_2022 : Supplying and fixing Medium size framed art prints on walls including all materials and labour charges etc

Electrical works

1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.12 : Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.5 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.5 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.8 Module

1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

od279181/2021_2022 : Supply and fixing Punch lamp including all materials and labour charges etc

od279182/2021_2022 : Supply and fixing Led 18w300mmx300mm Panel Light including all materials and labour charges etc

od279183/2021_2022 : Supply and fixing Led Strip Light including all materials and labour charges etc

od279894/2021_2022 : Supplying and fixing 20mm flexible conduit for wiring including all materials and labour charges etc.

od279185/2021_2022 : Supply and fixing Drive including all materials and labour charges etc

od279187/2021_2022 : Supplying and fixing Rj45 Connector Cat6 including all materials and labour charges etc.

1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

Audio and Video Systems

Supplying Projector Stand Ceiling Mount 4ft

Supplying Hdmi Cable 2.0v 4k 20m 3 Year Warrenty

Supplying Network Cabling 20 m & Commissioning Charge

Public Addressing System

Supplying Aux Cable 20 m

Supplying Ceiling Mounted Speakers

Supplying Wireless Microphone

Supplying Wired Microphone

Supplying Monojack Cable + Connector 20 m

Supplying and Fixing Mono Jack

Supplying and Fixing Pa System Cable 2 Pair including all materials and labour Charges etc

SASIDHARAN GOPALASAMY

Bidder Name

SASIDHARAN GOPALASAMY

vipin