Loading
Loading…
Loading…
Tender Value
₹5.6 L
EMD Value
₹5,700
Closing Date
17 Sept 2026, 6:00 pmClosed
Executive Engineering UPSIC KANPUR
Executive Engineering UPSIC KANPUR
Construction work of wooden flooring etc. in the multipurpose hall of Vraich Stadium
2026_MSME_1180272_8
1024/EE4/26-27
Open Tender
Civil Works
Percentage
90 days
BAHRAICH
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Executive Engineering UPSIC KANPUR
₹5,700
14 Sept 2026
14 Sept 2026
18 Sept 2026
14 Sept 2026
17 Sept 2026
14 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Removing dry or oil bound distemper ,water proofing paint and the like by scraping ,sand papering and preparing the surface smooth i/c necessory repairs to scratches etc complete ( DSR 13.91) | 391.7 | Sqm | 18.49 | ₹7,242.53 |
| 2 | Finishing With Deluxe multi Surface Paint System For Enterior & Exterior Using Primer As Per Manufacturer Specifications CPWD DSR-2023 DSR 13.48.1 | 391.68 | Sqm | 145.31 | ₹56,915.02 |
| 3 | Painting two coats over priming coat on wooden/steel surface upto 10 cm width or grith or small articles not exceeding 0.10 sqmt. In areas with superior synthetic enamel such as Luxol 3Hi gloss aqcolite superlac. Dulux specified finishing. CPWD DSR-2023 DSR 13.62.1 | 7.89 | Sqm | 122.22 | ₹964.32 |
| 4 | S/f Masquito Jali With Beat. (MR) | 2.43 | Sqm | 950 | ₹2,308.5 |
| 5 | Loading, Unloading, Fittings, Other Hidden & Miscellenous Work. | 1 | Sqm | 5,000 | ₹5,000 |
| 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm). | 3.72 | Sqm | 1,795 | ₹6,677.4 |
| 7 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron). | 20.46 | Kg | 995 | ₹20,357.7 |
| 8 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge:Powder coated minimum thickness 50 micron aluminium tubular handle bar. | 2 | No | 650 | ₹1,300 |
| 9 | High-strength, lightweight cable reinforced with synthetic, heat-resistant fiber | 32 | Mtr | 130 | ₹4,160 |
| 10 | Supply & Laying 10 sq mm wire. (Armoured Cable) | 8 | Mtr | 300 | ₹2,400 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.94 MB
TermsandConditionTenderCivilWorks.pdf
Tender Documents • 0.05 MB
BOQ_2219459.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .