WBPWD/EE/N24/EL/eNIQ-167/24-25

Amount

SUB HEAD 1 -- SITC OF AC Supply & delivery of 11.0 TR Ductable Air-Conditioner (Make- Carrier/Hitachi/Voltas/Daikin) Having one no. indoor unit and two nos outdoor units (5.5 TR each).

Installation, testing and commissioning of Indoor & outdoor unit of 11.0 TR Ductable Air Conditioner including VI Pad, nitrogen gas flushing, pressure testing etc..

S & F of Copper pipe (as requisite dia) with Insulation and wrapping tape for 11.0 TR Ductable Air conditioner.

S & F of Control wiring / network wiring using recommended quality (Make approved by EIC) of multicore wires (2.5 sqmm, 4 core copper cable) for 11.0 TR Ductable Air conditioner.

Supply and Laying of PVC Drain Piping with necessary fittings including wall chasing as per site requirements. (Make approved by EIC)

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage

Supply & Pouring of Extra Refrigerant Gas R410 A

Supply & Fixing of MS Out Door Structure (for two nos of 5.5 TR outdoor units) modification & rectification work

Supply & Fixing of Return Air Grill in the exsisting duct.

Dismentaling Charges of Existing two nos 5.5 TR outdoor Units

S & F of Duct Modification with 10mm Thick Accoustic Insulation (Make approved by EIC).

S & F of Canvas connection in the 11.0 TR Ductable Air conditioner.

False Ceiling Cutting & Rectification Work of Existing one.

SUB HEAD 2 -- PVC CONDUIT & COPPER WIRES Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (RR Kable/Polycab/Finolex) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 4 x 56/0.3 (4 sqmm) + 2 x 36/0.3 (2.5 sqmm) ECC [1(b-iii) / E- 14]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 2.5 sq mm [9(i) / F-5]

b) 4 sq mm [9(ii) / F-5]

c) 10 sq mm [9(iv) / F-5]

SUB-HEAD 3-- MISCELLANEOUS Supply & installation of 3- Phase DB Box of size -610 x 460 x 154 mm (HXLXB) made from 5mm thick M.S sheet on angle iron frame on wall,with hinged door and earthing arrangement as per direction of EIC. incl. and two nos insulation separators required to fix upper and lower side of bus bars with following accessories mentioned below with interconnection with suitable size of PVC insulated copper wire with proper socketting with required size of copper lugs as furnished below- i)incoming- 415 V, 40 A FP MCB on MS Channel din rail arrangement.- 1 nos ii) CU bars- 415 V,63 A, 4 bars x15mm widthx3mm thick and 500mm long iii) outgoing- 415 V, 25A FP MCB on MS Channel din rail arrangement.- 2 nos. with necessary connections with required size PVC cu wires and with earthing arrangements. [NS]

Supplying and Fixing GI outdoor type water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of required sizes DIN type MS channel for fixing of one no 4P Isolator as per direction of EIC. where necy. incl. painting. For Starter Isolator box 250 x 250 x 150mm [NS]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. [D-5/6] 32 A FP (Make- L&T/Legrand)

ANIKET COOLING AND REFRIGERATION CO (BID ID -5617775)

GITANJALI ELECTRONICS AND ELECTRICALS (BID ID -5626854)