Repair of existing Pathway, Providing and installation of benches and SS dustbin at Central Park in HWPM Colony.

Dismantling of Shahabad stone flooring laid on sand bed including carefully removing,transporting and stacking serviceable stones at colony store for re-use and disposing of unserviceable material within 50 m lead , complete as directed by the Engineer in charge.

Earth work excavation in all kinds of soil by mechanical means (Hydraulic excavator )/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan ) including dressing of sides and ramming of bottom for all lift including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m complete as per specifications and as directed by the Engineer.

Providing and laying Plain cement concrete of 1:3:6 (1 cement : 3sand : 6 stone aggregate) grade, using 20mm and down gauge crushed stone aggregate of approved quality, 43 grade OPC cement of ACC/ Ultratech/ Birla A1 or any other approved make in foundation and plinth, under floors, pavements, footings, pedestals etc., including spreading, leveling, ramming, finishing, curing etc., all complete as per specifications and as directed by the Engineer.

Providing and laying half brick masonry with Fly ash lime brick masonry of class 10 designation in CM 1:4 (1 cement : 4 coarse sand) in super structure including curing, provision of scaffolding etc., all complete as per specifications and as directed by the Engineer.

Providing and laying 12mm thick cement plaster of 1:4 (1cement : 4 fine sand) 43 grade OPC cement of ACC/ Ultratech/ Birla A1 or any other approved make, upto plinth level over a brick work/ concrete work to give even smooth finish where ever required and curing etc., all complete as per specifications and as directed by the Engineer in Charge.

Providing and laying 110mm dia best quality uPVC pipes of Astral/ Ashirvad/ supreme/ finolex make and specials in cement concrete pavement for all depths to correct grade, levels, alignment and slopes, jointed with hemp yarn and cement mortar 1:1 including testing, excavating the trenches, back filling, form work etc., all complete as per specifications and as directed by the Engineer in Charge.

Laying and compaction of pond ash at site including, carriage, loading, unloading & stacking up to 10 KM lead (transportation of ash from HWP(M) ash ponds) filling in pavements, sub-base, spreading in layers not exceeding 200 mm in depth, watering, ramming, rolling with manual roller, etc. complete with all leads and lifts, as per specifications and as directed by the Engineer-in-Charge

Providing and laying factory made chamfered edge Cement Concrete paver blocks of M-35 grade of 60mm thick Polymer coated coloured in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. Note:- The agency will have to submit the test report for compressive strength and PU colour coating before commencement of work.

Providing ,transporting and installing factory fabricated /integrated park bench of approved colour and texture with following specifications: 1. Decorative type cast iron frames with thickness of legs 29 mm + 1 mm 2. MS square tubes made up of 13 no's of size 50 mm x 25 mm of unit weight 1.23 kg/m in length of 1500 mm comprising back and seat coated with a rust inhibiting paint 3. Cast iron frame and MS tubes strips of length 1500 mm+ 10 mm ,width of 600mm + 10 mm and seat height 487 mm + 10 mm with bearing capacity of 180 kg ,fixed securely to the concrete pedestals complete as per approved design , manufacturer specifications and directions of Engineer -in-charge. Note:-1.Excavation & Concrete will be paid under relevant item. 2.Prior approval should be obtained for the model ,color and texture from Engineer -in-charge before placing the bulk order.

Providing ,transporting and installing factory fabricated /integrated 2 Bin mounted with 3 pole swing type cylindrical Dustbin of capacity of 60 liters for each bin with Stainless steel Grade 304 & pole height 500-600mm with ground clearance 300mm of approved , fixing on concrete pedestals complete as per approved design , manufacturer specifications and directions of Engineer -in-charge. Note:-1 Excavation & Concrete will be paid under relevant item .2.Prior approval should be obtained for the model and texture from Engineer -in-charge before placing the bulk order.