Himachal

Financial Eval

Works

Civil Works

Renovation and construction of LWSS Malyour from new source Mani khad in Tehsil Ghumarwin District Bilaspur (SH Construction of single room pump house 17.17 Sqmt area over existing foundation of lab building at Sanoti under CV Malyour).

HP Irrigation and Public Health

Sub Division Kandrour Section Harlog | Bilaspur, Himachal Pradesh

Amount: ₹3.4 LCloses: 18 Jul 2026Closed

Timeline

Published9 Jul 2026
Closed18 Jul 2026
Technical Evaluation21 Jul 2026
Financial Evaluation30 Jul 2026
Award—

Bids

Item Rate

4 Bids30 Jul 2026

#	Company	Amount	Rank	Status
1	M/s Raj construction Prop. Hemraj Chauhan 1₹3.4 LAccepted-Finance	₹3.4 L	1	Accepted-Finance L1
2	Rajni kumari 2₹3.5 L+₹8,321.73 (2.45%)Rejected-Finance	₹3.5 L+₹8,321.73 (2.45%)	2	Rejected-Finance L2
3	Mr. Sanjeev Kumar 3₹3.6 L+₹17,095.66 (5.03%)Rejected-Finance HIMACHAL PRADESH HP \| SHIMLA \| HIMACHAL PRADESH \| 171226	₹3.6 L+₹17,095.66 (5.03%)	3	Rejected-Finance L3
4	Vishal Chauhan Rejected-Technical VILL PO GHANALWIN TEHSIL GHUMARWIN DISTT BILASPUR H P \| BILASPUR \| HIMACHAL PRADESH \| 174001	-	-	Rejected-Technical Reject

BoQ Comparative

Line Items (28)

Sl No	Description	Qty	Unit	Mr. Sanjeev Kumar L3	M/s Raj construction Prop. Hemraj Chauhan L1	Rajni kumari L2
1.00Providing & laying c.conc. 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in.
1.01	Lintels,beams girders,bressumers & cantilevers upto floor level.	2.16	Cum	11,895 ₹25,693.2	10,500 ₹22,680 Lowest	10,520 ₹22,723.2
1.02	Columns, pillars posts and struts upto floor two level.	0.79	Cum	11,895 ₹9,397.05	11,870 ₹9,377.3 Lowest	11,890 ₹9,393.1
2.00	Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:4 (1cement : 4 sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge	6.16	Cum	11,895 ₹73,273.2	11,870 ₹73,119.2 Lowest	11,890 ₹73,242.4
3.00	Providing & fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges,jump lock jamb,beed & if required angle threshold of mild sttel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split & tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plare & shock as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by engineer in charge. ( profile "a" )	15.95	Rmt	625 ₹9,968.75	600 ₹9,570 Lowest	620 ₹9,889
4.00	Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts and to the entire satisfaction of the Engineer-in-charge	4.64	Sqm	5,375 ₹24,940	5,350 ₹24,824 Lowest	5,370 ₹24,916.8
5.00	Prov. & fixing wire gauge shutters using wooden for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws and to the entire satisfaction of the Engineer-in-charge	4.64	Sqm	3,750 ₹17,400	3,725 ₹17,284 Lowest	3,745 ₹17,376.8
6.00Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.
6.01	Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness and to the entire satisfaction of the Engineer-in-charge.	22.55	Sqm	590 ₹13,301.55	575 ₹12,963.38 Lowest	585 ₹13,188.83
6.02	Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers,bressumers 1.00 mts. In depth in all heights from floor and to the entire satisfaction of the Engineer-in-charge	8.06	Sqm	598 ₹4,819.88	585 ₹4,715.1 Lowest	595 ₹4,795.7

Tender Value

₹3.4 L

EMD Value

₹6,800

Closing Date

18 Jul 2026, 11:00 amClosed

Tender Inviting Organisation

Name

Executive Engineer

Address

Jal Shakti Division Bilaspur

Work Description

Renovation and construction of LWSS Malyour from new source Mani khad in Tehsil Ghumarwin District Bilaspur (SH Construction of single room pump house 17.17 Sqmt area over existing foundation of lab building at Sanoti under CV Malyour).

Tender Information

Tender ID

2026_HPIPH_138510_4

Reference Number

BLP-BLP-0736-NIT No. 5226-5325 Dated 08/07/2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

6800 days

Location

Sub Division Kandrour Section Harlog

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical

RequiredProof of tender cost and EMD as per NIT (.pdf)

RequiredPAN,GST,ITR,EPF and undertakings as per NIT (.pdf)

RequiredCertificate of registration with Jal Shakti Vibhag in appropriate class and latest renewal thereof. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹6,800

Important Dates

Last Activity

30 Jul 2026

Published

9 Jul 2026

Bid Opening

18 Jul 2026

Download Starts

9 Jul 2026

Download Ends

18 Jul 2026

Submission Starts

9 Jul 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (10 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing & laying c.conc. 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in.
1.01	Lintels,beams girders,bressumers & cantilevers upto floor level.	-	Cum	-	-
1.02	Columns, pillars posts and struts upto floor two level.	-	Cum	-	-
2Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:4 (1cement : 4 sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge
3Providing & fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges,jump lock jamb,beed & if required angle threshold of mild sttel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split & tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plare & shock as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by engineer in charge. ( profile "a" )
4Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts and to the entire satisfaction of the Engineer-in-charge
5Prov. & fixing wire gauge shutters using wooden for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws and to the entire satisfaction of the Engineer-in-charge
6Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.
6.01	Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness and to the entire satisfaction of the Engineer-in-charge.	-	Sqm	-	-
6.02	Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers,bressumers 1.00 mts. In depth in all heights from floor and to the entire satisfaction of the Engineer-in-charge	-	Sqm	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.32 MB

Work Item Documents

BOQ_205219.xls

BOQ • 0.25 MB

PWD6.pdf

Tender Documents • 0.40 MB

TC.pdf

Tender Documents • 0.17 MB

PWD8.pdf

Tender Documents • 1.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

M/s Raj construction Prop. Hemraj Chauhan

1₹3.4 LAccepted-Finance

Rajni kumari

2₹3.5 L+₹8,321.73 (2.45%)Rejected-Finance

Mr. Sanjeev Kumar

3₹3.6 L+₹17,095.66 (5.03%)Rejected-Finance

HIMACHAL PRADESH HP | SHIMLA | HIMACHAL PRADESH | 171226

Vishal Chauhan

Rejected-Technical

VILL PO GHANALWIN TEHSIL GHUMARWIN DISTT BILASPUR H P | BILASPUR | HIMACHAL PRADESH | 174001

Sl No	Description	Qty	Unit	Mr. Sanjeev Kumar L3	M/s Raj construction Prop. Hemraj Chauhan L1	Rajni kumari L2
1.00Providing & laying c.conc. 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in.
1.01	Lintels,beams girders,bressumers & cantilevers upto floor level.	2.16	Cum	11,895 ₹25,693.2	10,500 ₹22,680 Lowest	10,520 ₹22,723.2
1.02	Columns, pillars posts and struts upto floor two level.	0.79	Cum	11,895 ₹9,397.05	11,870 ₹9,377.3 Lowest	11,890 ₹9,393.1
2.00	Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:4 (1cement : 4 sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge	6.16	Cum	11,895 ₹73,273.2	11,870 ₹73,119.2 Lowest	11,890 ₹73,242.4
3.00	Providing & fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges,jump lock jamb,beed & if required angle threshold of mild sttel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split & tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plare & shock as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by engineer in charge. ( profile "a" )	15.95	Rmt	625 ₹9,968.75	600 ₹9,570 Lowest	620 ₹9,889
4.00	Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts and to the entire satisfaction of the Engineer-in-charge	4.64	Sqm	5,375 ₹24,940	5,350 ₹24,824 Lowest	5,370 ₹24,916.8
5.00	Prov. & fixing wire gauge shutters using wooden for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws and to the entire satisfaction of the Engineer-in-charge	4.64	Sqm	3,750 ₹17,400	3,725 ₹17,284 Lowest	3,745 ₹17,376.8
6.00Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.
6.01	Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness and to the entire satisfaction of the Engineer-in-charge.	22.55	Sqm	590 ₹13,301.55	575 ₹12,963.38 Lowest	585 ₹13,188.83
6.02	Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers,bressumers 1.00 mts. In depth in all heights from floor and to the entire satisfaction of the Engineer-in-charge	8.06	Sqm	598 ₹4,819.88	585 ₹4,715.1 Lowest	595 ₹4,795.7

Sl No

Description

Qty

Unit

Mr. Sanjeev Kumar

M/s Raj construction Prop. Hemraj Chauhan

Rajni kumari

1.00Providing & laying c.conc. 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in.

1.01

Lintels,beams girders,bressumers & cantilevers upto floor level.

2.16

Cum

11,895

₹25,693.2

10,500

₹22,680

Lowest

10,520

₹22,723.2

1.02

Columns, pillars posts and struts upto floor two level.

0.79

Cum

11,895

₹9,397.05

11,870

₹9,377.3

Lowest

11,890

₹9,393.1

2.00

Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:4 (1cement : 4 sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge

6.16

Cum

11,895

₹73,273.2

11,870

₹73,119.2

Lowest

11,890

₹73,242.4

3.00

Providing & fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges,jump lock jamb,beed & if required angle threshold of mild sttel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split & tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plare & shock as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by engineer in charge. ( profile "a" )

15.95

Rmt

625

₹9,968.75

600

₹9,570

Lowest

620

₹9,889

4.00

Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts and to the entire satisfaction of the Engineer-in-charge

4.64

Sqm

5,375

₹24,940

5,350

₹24,824

Lowest

5,370

₹24,916.8

5.00

Prov. & fixing wire gauge shutters using wooden for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws and to the entire satisfaction of the Engineer-in-charge

4.64

Sqm

3,750

₹17,400

3,725

₹17,284

Lowest

3,745

₹17,376.8

6.00Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.

6.01

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness and to the entire satisfaction of the Engineer-in-charge.

22.55

Sqm

590

₹13,301.55

575

₹12,963.38

Lowest

585

₹13,188.83

6.02

Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers,bressumers 1.00 mts. In depth in all heights from floor and to the entire satisfaction of the Engineer-in-charge

8.06

Sqm

598

₹4,819.88

585

₹4,715.1

Lowest

595

₹4,795.7

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing & laying c.conc. 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in.
1.01	Lintels,beams girders,bressumers & cantilevers upto floor level.	-	Cum	-	-
1.02	Columns, pillars posts and struts upto floor two level.	-	Cum	-	-
2Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:4 (1cement : 4 sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge
3Providing & fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges,jump lock jamb,beed & if required angle threshold of mild sttel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split & tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plare & shock as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by engineer in charge. ( profile "a" )
4Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts and to the entire satisfaction of the Engineer-in-charge
5Prov. & fixing wire gauge shutters using wooden for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws and to the entire satisfaction of the Engineer-in-charge
6Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.
6.01	Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness and to the entire satisfaction of the Engineer-in-charge.	-	Sqm	-	-
6.02	Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers,bressumers 1.00 mts. In depth in all heights from floor and to the entire satisfaction of the Engineer-in-charge	-	Sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing & laying c.conc. 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20 mm nominal size ) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in.

1.01

Lintels,beams girders,bressumers & cantilevers upto floor level.

Cum

1.02

Columns, pillars posts and struts upto floor two level.

Cum

2Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:4 (1cement : 4 sand) in all leads and lifts and to the entire satisfaction of the Engineer-in-charge

3Providing & fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges,jump lock jamb,beed & if required angle threshold of mild sttel angle of section 50 x 25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split & tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plare & shock as specified & applying a coat of approved steel primer after pretreatment of the surface as directed by engineer in charge. ( profile "a" )

4Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts and to the entire satisfaction of the Engineer-in-charge

5Prov. & fixing wire gauge shutters using wooden for doors,windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws and to the entire satisfaction of the Engineer-in-charge

6Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.

6.01

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness and to the entire satisfaction of the Engineer-in-charge.

Sqm

6.02

Sqm