Renovation of Sub Division office in Canal Colony Dadupur

Amount

Scraping of old cement plaster upto 4mtr.

Scraping of old cement plaster above 4mtr.

10mm thick cement plaster 1:3 upto 4mtr.

10mm thick cement plaster 1:3 above 4mtr.

Cement plaster 12mm thick 1:4 on walls upto 4Mtr.

Cement plaster 12mm thick 1:4 on walls above 4Mtr.

Scraping white wash and colour wash

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled (doors)

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled (Window)

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled (Clerestory Windows)

Removal of old broken glass panes (any thickness or size, quality or description) from wooden frames, glazed with putty or fixed with beads.

Removing serviceable glass of any thickness or size or description except polished plate glass from old wood or metal frames etc (any thickness or size) haching out old putty etc. including making good breakages in taking out and handling complete

Wire gauze deodar wood door and windows shutters without springs housed in chowkats including chocks/cleats, iron hinges, and screw. Etc. complete fixed in position (excluding the cost of tower bolts and handles but including the labour for fixing the same) 35 mm thick

Dismantling wire gauze with frame work including separating frame work and putting wire gauge into rolls.

Wire gauze fixed on chowkats with 25 mm thick deodar wood cover moulding of full width

Deodar wood door and windows shutter including hinges, screws, chocks/cleats and stops, etc., complete fixed in position les but including the labour for fixing the same )-paneled, glazed, or glazed and panelled-40mm thick (12mm thick deodar wood panel)

Wrought iron and mild steel (using angle, flats , square bars , tee and channel) ladders grill , grating frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc. including cost of screws and welding rods or bolts and nuts complete fixed in position.

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc

Painting two coats with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint

Providing and fixing in position best Indian make (ordinary) lavatory suites consisting of lavatory in vitreous chinaware size as given below (to the approval of the Engineer-In-charge) including china plug for taphole where necessary. R.S or C.I brackets for building into wall including painting. 32mm CP Brass waste with C.P brass chain and rubber plug. 15mm CP Brass screw down pillar tap with jamnuts or couplings best design (as approved by the Engineer-in-charge) All fittings best Indian make and to the approval of the Engineer-in-charge all brass work chromium plated and complete in all respects including cutting and making good the walls floors and painting of fitting etc. size 560mm x 450mm with one No. tap

Providing and fixing sliding bolt with nuts and screws, etc. complete Aluminum of size 300mm x16mm

Providing and fixing helical door spring 150 mm (superior quality) including necessary screws, complete brass

Cost of brass fittings complete for doors and windows, such as tower bolts, handles etc. and screws for these fittings (excluding sliding bolts) for double leaf shutter

Providing fixing 150mm floor brass door stoppers, with rubber cushion, screws, etc. to suit shutter thickness complete brass.

Providing and fixing in position C.P brass 15 mm stop cock male & female

Providing and fixing in position C.P brass 20 mm stop cock male & female

Providing and fixing H.C.I floor traps ISI marked of self cleaning design with C.P brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors, etc, minimum depth of water should be 150mm with a minimum seal of 50mm. with 50mm i/d outlet.

Providing and fixing in position C.I Gully trap cover weighting approximately 7.26 Kg. and frame for gully trap chamber clear opening size 300mm x 300mm and out side size 330mm x 330mm including painting the exposed surfaces with 3 coats of block bitumastic superior paint of approved manufacture etc.

Providing & fixing PVC Rain Water Pipe 6kg. pressure of ISI mark in cement mortar during masonry work 100mm dia PVC pipe 6kg pressure.

Providing & fixing PVC bend ISI mark 100 dia PVC bend

Repair of joinery

White wash 3 coat

Finishing walls with exterior decorative cement based paints such as snowcem robbiacem etc on new work, two coats to give an even shade

Painting two coats with synthetic enamel paint in all shades on old wood work to give an even shade including rubbing down old paint

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe fan point medium

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe fan point long

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe light point medium

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe light point long

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe Call bell point including MS Box of size 180mm x 100mm x 60mm medium point

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe 3pin 5amp plug point including earthing the 3rd pin etc. medium point

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe 3pin 5amp plug point including earthing the 3rd pin etc. long point

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe 3pin 15amp plug with 4 Sqm PVC insulated copper conductor cable including earthing the 3rd pin etc. medium point

Wiring in 1.5 sqm PVC insulated copper conductor cable in 1.6mm thick conduit pipe 3pin 15amp plug with 4 Sqm PVC insulated copper conductor cable including earthing the 3rd pin etc. long point

Supply and erection of metal clad switches/ B.D.Bs with rag bolts on wall or on existing angle iron board/pedestal including bonding to earth and necessary connections double pole switch 63 amp 240 volts.

Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connection 40 amp to 63 amp

Supply and erection of street light luminaire 2*28 watts energy saving fitting suitable for two Nos. 28 watts T-5 tube light including the cost of standard accessories as supplied by the manufacturer with the fitting and cost of two Nos. 28 watts tube rod including the erection of fitting and making necessary connection with required material to complete the job in all respect.

Vinod Kumar