Interior renovation in PAO branch and B and A Branch at Deep Bhawan

Amount

PART-A(CIVIL) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in -charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including cost of supply of all labour, materials, tools etc. complete.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge including cost of supply of all labour, materials, tools etc. complete.

Dismantling mosaic flooring by manually means including stacking of serviceable materials and disposal of unserviceable within 100 meters lead as per direction of Engineer-in-charge, including cost of supply of all labors, tools & plants, transportation and all other charges etc. complete.

Dismantling doors, windows and clerestory windows (steel or wood) shutter and grill including labors, tools & plants etc., complete and stacking within 50 meters lead including cost of supply of all labors, tools & plants, scaffolding and all other charges etc. complete.

Dismantling aluminum/ Gypsum partitions, cupboards, storage unit, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge including cost of supply of all labour, materials, tools etc complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level - 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) including cost of supply of all labour, materials, tools etc. complete.

Half brick work masonary with bricks of approved quality in super structure at all heights and wherever required in C.M. 1:4 (1cement and 4 coarse sand) as per standard specifications and as directed including cost of supply of all labour, materials, tools, scaffolding curing etc. complete.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete (for window grill work) including cost of supply of all labour, materials, tools etc. complete.

Patch plastering (Four storied building) with cement mortar 1:4, 20mm thick on wall, ceiling at all heights as directed and wherever required including cutting the patch in proper shade and disposal of debris, curing, Scaffolding tools and plant etc. complete including cost of supply of all labour, materials, tools scaffolding etc. complete.eart

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including cost of supply of all labour, materials, tools scaffolding etc. complete.

Providing and applying Two or more coat of white cement based wall putty of approved first quality brand and manufactures including cost of supply of all materials, labors, tools & plants and all other charges complete. Brand Birla, JK wall putty, Berger etc. including cost of supply of all labour, materials, tools scaffolding etc. complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter including cost of supply of all labour, materials, tools, scaffolding etc. complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work including cost of supply of all labour, materials, tools, scaffolding etc complete.

Painting two coats on steel/wood work on previously painted doors, windows, ventilators, M.S. Grills and Grill doors at all height with synthetic enamel paint of approved first quality and colour to (Shalimar - super lac, Berger - Luxol, Asian - Apcolite, J & N - Robbiclac) give an even shade after thoroughly cleaning the surface of all dirt, dust, loose scales, grease, other foreign matter etc.; with wire brush/ emery paper/scrappers etc., preparation of surface including applying putty and primer wherever required all as directed, including cost of all materials, labour, tools, scaffolding etc. complete

Providing and fixing false ceiling of 12.5mm thick fully perforated gypsum board in tile made from plasterboard having glass fiber confirming to IS 2095 Part 1, of size 595mmx595mm, having perforation of 9.7x9.7mm at 19.4 mm c/c with boarders of 48mm and the side border of 30mm, backed with non wowen tissue on the back side, having an NRC (Noise reduction coefficient ) of 0.79 with 50mm resin bonded glass wool backing tiled false ceiling of approved materials of size 595x595mm in true horizontal level , suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams /sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.3mm thick (minimum) sheet spaced at 1200mm centre to centre and cross T of size 24x25mm made of 0.3mm thick (minimum) sheet, 1200mm long spaced between main "T" of size 24x25mm made of 0.3mm thick (minimum) sheet, 1200 long spaced between main "T" at 600mm centre to centre to form a grid of 1200x600mm and secondry cross "T" of length 600mm and size 24x25mm made of 0.3mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making opening for services like diffusers, grill, light fitting, smoke detector, etc main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8mm spaced at 1200mm centre to centre along main T, bottom exposed width of 24mm of all T-sections shall be pvc painted with polyester paint, all complete for all heights as per specifications, drawings, and as directed and including supporting grid system, equipment, handling, transportation, workmanship, expansion fasteners for suspension arrangement from RCC preparation of working drawings providing openings for AC duct, return air grill, light fixtures etc all complete supply of all labour , materials tools etc. complete.

Providing and laying vitrified floor tiles of size 600mmx600mm size with water absorption less then 0.08% and conforming to IS 15622 of approved make ( Johnson /Kajaria /Nelco), in all colours and shades laid on 20mm. thick cement mortar 1:4(1cement,4coarse sand), including grouting the joints with white cement and matching pigments etc. In true line and level and joints filled with white cement and matching pigments, including cost of supply of all labours, tools and plants, materials and finishing etc. complete as directed by the Engineer in charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing of 35mm thick door shutter

Providing and fixing 35mm thick double leaf glaze door of second class teak wood (doors 1500x2100mm) with 6mm thick float glass including necessary hardwares ISI marked M.S. pressed butt hinges bright finished 250mm tower bolt, 150mm drop bolt and handles of all approved quality as per drawing and specification, supply of all materials, labours tools and plants etc complete.

Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including necessary hardwares i.e including necessary hardwares ISI marked M.S. pressed butt hinges bright finished 250mm GI tower bolt, 150mm drop bolt, all of approved quality as per drawing and specification including cost of supply of all labour, materials, tools etc complete.

Providing and fixing full height storage/ low height sliding shutter storage cabinet sliding shutter for storage cabinet made from 12mm thick water proof pre laminated plyboard from marino green ply with SS hinges handles with locking arrangement inside enamel painting as per drawing specifications including cost of supply of all labour, materials, tools etc complete.

Full height storage cabinet (depth 450mm)

Low height sliding shutter storage cabinet (depth 450mm)

Supplying of high back executive chair of reputed make (Geeken model GB-401 or equivalent) with polyurethane arm rests, seat and back on fabric upholstery, with center tilt mechanism, swivel mechanism pneumatic height adjustment mechanism, base with 5 twin wheel castors supports, finished for an attractive appearance, approved colors etc. including cost of supply of all labour, materials, tools etc. complete.

Supplying of mid back working chair of reputed make (Geeken model GB-402 or equivalent) with polyurethane arm rests, seat and back on fabric upholstery, with center tilt mechanism, swivel mechanism pneumatic height adjustment mechanism, base with 5 twin wheel castors supports, finished for an attractive appearance, approved colors etc. including cost of supply of all labour, materials, tools etc. complete.

Supplying of mid back working chair of reputed make (Geeken model GB-410 or equivalent) with polyurethane arm rests, seat and back on fabric upholstery, with center tilt mechanism, swivel mechanism pneumatic height adjustment mechanism, base with 5 twin wheel castors supports, finished for an attractive appearance, approved colors etc including cost of supply of all labour, materials, tools etc. complete.

Supply of S type tubular visitors chairs of reputed make (greeken make model no. GB-403 or equivalent) mid back with polyurethane arm rests, seat and back on fabric upholstery finished for an attractive appearance approved colors including cost of supply of all labour, materials, tools etc complete.

Supply of W1350mm x D750mm x H750mm main desk of reputed make (Geeken or equivalent) with W1200mm x D450mm x H750mm return unit, W750mm x D425mm x H750mm storage unit, W390mm x D435mm x H529mm mobile pedestral. Wood laminated finish etc including cost of supply of all labour, materials, tools etc complete.

Supply of low height modular four seater Workstation with partitions as per following: Partitions:- 75mm thickness, height 1300mm, provision for cable tray below & above workstation partition, minimum cable tray 50mm, Frame :- Steel frame, powder coated oven baked finish, average weight of 900mm x 1200mm frame shall be 14kg minimum shall have tile fixing arrangement partition finish combination of 10mm thick MDF with 1mm laminated on both sides, 12mm thick fabric tiles, 12mm thick pinup tiles made up of 6mm polypropylene fluted sheets as per approved design and shade, curved trim Table top:- 1500mm x 1500mm pre laminated particle board. Accessories: - 3 drawer units with locking arrangement, keyboard pullout tray, and powder coated CPU trolley, concealed wire management all as approved etc. including cost of supply of all labour, materials, tools etc. complete.

Supply of low height modular two seater Workstation with partitions as per following: Partitions:- 75mm thickness, height 1300mm, provision for cable tray below & above workstation partition, minimum cable tray 50mm, Frame :- Steel frame, powder coated oven baked finish, average weight of 900mm x 1200mm frame shall be 14kg minimum shall have tile fixing arrangement partition finish combination of 10mm thick MDF with 1mm laminated on both sides, 12mm thick fabric tiles, 12mm thick pinup tiles made up of 6mm polypropylene fluted sheets as per approved design and shade, curved trim Table top:- 1500mm x 1500mm pre laminated partical board. Accessories: - 3 drawer units with locking arrangement, keyboard pullout tray, and powder coated CPU trolley, concealed wire management all as approved etc. including cost of supply of all labour, materials, tools etc. complete.

Supply of low height modular single seater Workstation with partitions as per following: Partitions:- 75mm thickness, height 1300mm, provision for cable tray below & above workstation partition, minimum cable tray 50mm, Frame :- Steel frame, powder coated oven baked finish, average weight of 900mm x 1200mm frame shall be 14kg minimum shall have tile fixing arrangement partition finish combination of 10mm thick MDF with 1mm laminated on both sides, 12mm thick fabric tiles, 12mm thick pinup tiles made up of 6mm polypropylene fluted sheets as per approved design and shade, curved trim Table top:- 1500mm x 1500mm pre laminated partical board. Accessories: - 3 drawer units with locking arrangement, keyboard pullout tray, and powder coated CPU trolley, concealed wire management all as approved etc including cost of supply of all labour, materials, tools etc complete.

Providing and fixing cup boards shutters including necessary frame work with 12mm thick prelaminated (both side laminated) MDF panel with frame including all fittings and fixtures (brass hinges, 100 mm brass handle, lock) after dismantling the existing prelaminated partical board shutters and taking out the dismantled materials, supply of all labours, materials, tools etc c including cost of supply of all labour, materials, tools etc complete.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. including cost of supply of all labour, materials, tools etc complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws including cost of supply of all labour, materials, tools etc complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws including cost of supply of all labour, materials, tools etc complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, including cost of supply of all labour, materials, tools etc complete.

Providing and fixing in position powder coated (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe95x38.10x0.90millimetre @ weight 0.637kg/mtr. with window frame bottom track section92x31.75x1.30mm at weight1.070kg./mtr Top and side track section92x31.75x1.30mm at weight0.933kg/mtr. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417kg/mtr. Interlocking section 40x18x1.10mm at weight 0.469kg/mtr. and handle and top section 40x18x1.25mm at weight 0.417kg/mtr .as per detailed drawing and as directed by Engineer in charge with all necessary Aluminium section fixtures and fastenings such as roller bearing in nylon casting and self-locking catch fitted vertical section of shutter including 5mm thick high performance single glaze unit(SUG) glass aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc, complete. With colour anodising with box including cost of all materials, labour, tools, scaffolding etc complete

Providing and fixing of coloured rolling blinds with pelmet in Aluminium window as directed including with frame supply of all labours, materials, tools and plants and all other charges etc complete.

Shifting of demolished debris from Dep Bhavan to municipal limits for dumping of debris and cleaning the site including loading of trucks and unloading at municipal areas supply of all labours transportation charges etc complete

Recovery of salvage value/Scrap value of recovered materials at the time of dismantling like storage unit, cupboard, tables, chairs, partition, old work stations, dismantled grill and shutter etc including cost of transportation from the site but excluding the cost of dismantling labours, tools materials etc complete. (Doors, window grills, and MS shutter, Aluminium Partition, wooden storage/Cupboards etc (PAO and B & A Sections), and wooden work station, Tables, Chairs etc of PAO and B & A section.

PART-B (ELECTRICAL) Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 4 x 6 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

Bell push

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

6 Module (200mmX75mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required

1 or 2 Module

3 Module

6 Module

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Triple pole and neutral

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) For on line UPS supply 8 way , Double door

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm

Earthing with G.I. earth pipe 4.5-metre-long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. watering pipe etc. with charcoal/ coke and salt as required

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supplying and fixing single phase motor starter for Air conditioner 25 Amp. Capacity 240V 50 Hz reputed make ISI

Supplying and fixing call bell reputed make ISI

Supplying and installation of LED false ceiling light square type 2”x2” size 36-40 watt cool white light make ISI, Support to hang the fixture to be provided in the roof with suitable length of chain links or GI wires of suitable size, as per recommendation of the light manufacturer.

Supplying and installation of LED false ceiling light round type 10 watt cool white light make ISI, Support to hang the fixture to be provided in the roof with suitable length of chain links or GI wires of suitable size, as per recommendation of the light manufacturer.

Supplying and fixing wall mounted fan size 400 mm make ISI

Providing and fixing male female plug 5 amp

Relocation of split type indoor–outdoor units (1.5 ton capacity air conditioner) as per requirement by removing the existing unit and refixing at a new place within the room including all connection copper pipe, plant, tool etc. completed.

Supplying and fixing extra copper pipe for split type Air conditioners

Relocation of window type units (1.5 ton capacity air conditioner) as per requirement by removing the existing unit and refixing at a new place within the room including all connection, plant, tool etc. completed.

Labour Charges for removing of old tube light, ceiling fans old electrical supply point, switch/socket MCB distribution box etc. completed.

Agarwal Associates

ALPINE OFFICE AUTOMATION