REPAIR TO BOUNDARY WALL, FENCING, GATES AT 769 SU AND DARJIPURA AT AFS VADODARA AT AFS VADODARA AT AFS VADODARA

Amount

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of Precast concrete block/ Brickwork or stone/boulder masonry, laid with cement mortar complete all as specified and directed.

Demolition and breaking up RCC/Cast iron drain pipe of any dia set in cement mortar and disposal of unservicable material and rubbish to a distance not exc 100m complete all as specified and directed

Dismantaling of barbed wire complete all as specified and directed.

Dismantaling of concertina coil complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, post embedded concrete brick etc complete all as specified and directed

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deep and getting out in hard/dense soil complete all as specified and directed

Excavation in post holes (for similar holes) each n.exc. 0.5 CUM getting out removing filling, in and ramming earth or broken mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance n.exc. 50m and making good surface in soft loose soil complete all as specified and directed

M & L for stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for PCC 1:2:4 type B2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed

M&L for PCC 1:3:6 type C2 (using 40mm graded aggregate) as in foundation, filling and mass complete all as specified and directed

M&L for Precast cement concrete block masonry with solid block type C1 (1:3:6) using 20 mm graded aggregate exc. 10 cm in width in CM 1:4 complete all as specified and directed

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 cm complete all as specified and directed.

M&L for 100 mm thick concrete (1:2:4) type B-2 using (40 mm graded crushed stone aggregate) as in path complete all as specified and directed.

M&L for 75 mm thick concrete (1:3:6) type C-2 using (40 mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster, terrazzo/cement dado, skirting etc of any description on brick/stone walls, concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick in cm 1:6 on fair faces of brick or concrete surfaces and finishing even and smooth complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in coping complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 40 mm graded aggregate) cement concrete in surface channels and drains complete all as specified and directed

M&L for concrete bed of PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) for 300mm SGSW pipe including packing under and haunching against the side of pipe complete after pipes are laid , jointed and tested complete all as specified and directed

M&L for 300 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed

S&F PVC(SWR) pipes of 100mm bore double socketed in any length with rubber rings joints laid in fixed to walls/laid in trenches including clamps complete all as specified and directed

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (FE-290 GDE-E-165) complete all as specified and directed.

S&F 1.6 mm thick Mild steel, plain black sheet in hearths; covering to man holes, water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified and directed

S & F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment FE 410-w Gde E-250 Quality A complete all as specified and directed.

S & F in repair 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and directed

S & F Safety lever locks mild steel with 4 leavers for rolling shutters complete all as specified and directed

S & F Ball bearing for rolling shutters complete all as specified and directed

S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. complete all as specified and directed.

S&F Concertina coil razor tape barbed wire (reinforced barbed tape) of the following specification :- (i) Dia of coil when un stretched 600 mm (ii) No of circles 5. to 5. per coil (iii) Weight of each coil 9.5 to 10 KG (iv) Coverage per coil 8 RM (v) Central core wire :- Made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanized (conforming to IS-2629) with dia meter 2.59 mm + 0.05 mm, UTS 145 -160 Kg/Sqmm, Zinc coating 250-300/per Sqm (vi) Strip :- Electro galvanized steel strip 0.5 mm + 0.02 mm thick, width 19 mm (before wrapping on central core wire) conforming to IS 1573, Zinc coating -120 gm.Sqm and bituminized dipped, width of barbs 11.5 mm, pitch of barbs 25.4 mm + 0.2 mm (vii) Clips : - AISI 304 -1.5 mm thick c and u clips C special type for fixing coil and RBT wire U clips special type for joining one coil to another coil and RBT wire to RBT wire joining (viii) No of clips 125 for each coil (ix) Handle and spikes to be provided as required Make :- 1. MORRIS BALFOROUR & CO TELE NO 033-2233-1204, 2230-9846 2. GLOBAL FENCING WORKS MUMBAI TEL NO 23859-454-23857-374 or any other makes as approved by the Accepting Officer.Note : Running length of the wall shall be measured.

S&F MS section for post and struts in fencing including cutting tops to shape as directed drilling holes etc and simmilar work including all nesecery work conforming to FE-290 Gde E-165 complete all as specified and directed.

Fixing only chainlink fencing incl line wire any mesh size and type of any type of standard, rails, straining bolts etc. including provision of binding wire complete all as specified and directed

Supply only M.S Galvanised chain link fencing any size or type complete all as specified and directed

S&F MS flats to receive expanded metal or fabric etc and staining with welding complete all as per specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long with dia 11 to 15 mm complete all as specified and directed

S&F 10 mm dia of mild steel round bars for holding chain link fencing conforming to Fe-410-s or Fe 410-0, cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends complete all as specified and directed

M & L for Machine pressed precast concrete interlocking paver block of approved quality set & jointed in cement slurry and pointed in grey cement and no pigment to match confirming to IS 15658-2006 of 60mm thick M-35grade complete all as specified and directed

M & L for sand filling under interlocking paver block in cluding watering and consolidation complete all as specified and directed

M & L cement concrete pre-polished chequered paver tiles of size of size 305x305x20mm thick with approved colour and approved design set and jointed in neat cementslurry and pointed in white/colour cement to match the shade of the tile incl, complete all as specified and directed. complete all as specified and directed.

M & L for Pavement floor vitrified tiles of size exc 0.09 sqm but not exc 0.36 sqm 10mm thick (Endura tiles of Johnson or equivalent makes listed in List of Makes) set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment to match the colour of tiles in floor complete all as specified and directed.

M & L for 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for 25 mm thick concrete (1:2:4) type B-0 using (12.5 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M & L Preparation of new plastred surfaces and applying Two coats of Cement base paint over etc complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel & iron work over 10cm width or girth & applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

M & L for preparation of old steel surfaces of any description, over 10 cm in width or girth, and applying one coats of synthetic enamel paint complete all as specified and directed

M & L Preparation of old plastred surfaces and applying two coats of weather proof acrylic paint complete all as specified and as directed.

M & L for preparation of old Painted concrete /Plastered floor surfaces over 10CM in width or girth including cleaning the surfaces by wire brushes and washing and applying one coat of terracota colour acrylic antifungal exterior emulsion paint on floor of PCC chequered tiles complete all as specified and directed.

Removal of excaveted material n.exc 50mm and deposited where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

Returing filling including spreading levelled watering and well ramming in layer not exc 25 cm complete all as specified and directed

Demolition of reinforced cement concrete in ground floors and paving n exc 15cm thickness ( below and above ground level) complete all as specified and directed

M & L RCC 1:2:4 type B-1 using 20mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F TMT bars 8mm dia cut to length bent to shape required incl cranking bending & binding with mild steel wire aunealed not less than 0.9mm dia complete all as specified and directed

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick fair finished surfaces of conerete flat complete all as specified and directed

M & L for providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4, complete for kerb stone complete all as specified and directed.

M & L Preparation of New plastred surfaces and applying two coats of weather proof acrylic paint over and including one coat of exterior grade acrylic primer and etc complete all as specified and directed.

M & L for providing precast cement concrete louvers, using cement concrete 1:2:4 mix type BO (using 12.5 mm graded aggregate) and jallies, 35mm thick (mea- sured solid), including all mould- ings but excluding frame complete all as specified and directed

M&L for preparation of old or previously untreated surfaces of steel & iron work & applying a one coat of Almunium paint complete all as specified and directed

M & L for preparation of new surface of concrete of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over priming paint plaster coat complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

ASC CONSTRUCTION

ABP CONSTRUCTION