Renovation of District Treasury Office At Bahumali Bhavan, Junagadh

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Fixing Low Hieght Decorative Composite partiton of wooden, gap as per

drawing or as directed by engineer-in-Charge, Using 8 mm thick ISI marked Ply on both

side fixed on a teakwood framing grid of teakwood member Size 65 mm x 38 mm at

600 mm C/C on Vertical side and on horizontal side as per design or as directed by

Engineer -in - Charge. Wooden portion consists of both side 12 mm thick ply with 1 mm

thick vinyl wooden lamination sheet on outer side of ply Colour & Design of Lamination

is as per Drawing or as directed by Engineer-in- Charge. Glass portion consist of 5 mm

1 thick toughned glass with wooden framing. The Partion also includes door When 217.00 7433.60 Sqm

necessary as per drawing by using 8mm ply on both side with 1 mm thick lamination

including frame of 25mmx75mm included,beading on outer side, good quality door

closer, godrej lock, SS hinges etc. Rates includes all Labour, Material, Screw, Khilli,

Fevicol, PU finish on outer side of ply including all taxes Etc. complete. All Material to

be used as approved by Engineer-in-Charge

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Fixing Full Hieght Decorative Composite partiton of wooden, glass and

gap as per drawing or as directed by engineer-in-Charge, Using 8 mm thick ISI marked

Ply on both side fixed on a teakwood framing grid of teakwood member Size 65 mm x

38 mm at 600 mm C/C on Vertical side and on horizontal side as per design or as

directed by Engineer -in - Charge. Wooden portion consists of both side 12 mm thick

ply with 1 mm thick vinyl wooden lamination sheet on outer side of ply Colour &

Design of Lamination is as per Drawing or as directed by Engineer-in- Charge. Glass

2 portion consist of 5 mm thick toughned glass with wooden framing. The Partion also 29.00 7549.75 Sqm

includes door When necessary as per drawing by using 8mm ply on both side with

mm thick lamination including frame of 25mmx75mm included,beading on outer side,

good quality door closer, godrej lock, SS hinges etc. Rates includes all Labour, Material,

Screw, Khilli, Fevicol, PU finish on outer side of ply including all taxes Etc. complete. All

Material to be used as approved by Engineer-in-Charge

Providing and fixing of Sliding glass door without door frame. The Door with 12mm

Clear Toughend Glass with slim profile frame in periphery of Glass with film on glass or

as permentioned in design. Door with Necessary Hardwares required like Top Bottom

Patch fittings with top Sliding Chenal, Pull Handle & Floor Chenal. Door with designer

film to maintain the privecy. Film with necessary Groove or design cutting if required

3 by Architect.All materials like Aluminum Profiles, Hardwares and accessories should 4.00 11873.56 Sqm

have to be from approved makelist and with approval from consulting Architect &

Engineer-in-charge.The work shall be done as per the approved shop drawings

specifications, sample approved and as directed by the Architect and Engineer-in-

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing And Arranging table top made of 36mm thick MR grade plywood with nail

curvica Laminate finish.Leg & frame to be made from 50 x 50 x 1.6mm size & 50mm x

25mm x 1.8mm size CRC Square pipe powder coated 50 micron finish with levlar

Appron 18 mm thick MR grade plywood with Laminate finish. side table top made of

36mm thick MR grade plywood with nail curvica Laminate finish. side & shutter made

of 18 mm thick MR grade plywood with Laminate finish Including all materials and

labour etc.Mesurment on Tabale Top Complete as per drawing and instruction of

engineer-in charge.

Table -1 - size : Depth 900 to 750 mm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

TABLE TYPE-01 (Custom Made Commissinor Main Table) : Providing and fixing table unit consist

main table with side storage ,back storage with pedestal unit with allnecessary accessories

keyboard, CPU stand ,cable manager, modesty panel etc with all required necessary accessories.

Main Table top : 2000(L) x 1050(W) x 750 (H)mm

Side table - 1050 (L)x 600(W) x 750 (H)mm

side table unit -510 mm Dia (half Round as per DWG)

1. Main Table Top: 50 MM th top Made from beveled edge finish 4 mm th coloured glass Saint

gobain /eqvivalant approved make and shade/ veneer + 19 MM th IS-710 ply + 19 mm th IS-710

ply+4 mm th veneer finish with semi gloss PU polish.

2.Main table front : As per detail drawing and reference image made form 19 mm th IS-710 ply

with rwith veneer finish

3.Verticle support: As per detail drawing and reference image made form 61 mm th verticle

support 4 mm th Veneer gurjan base ply + 19 MM th IS-710 ply +35x35 x 2.6 mm thick metal box

of tata or equivalent+ 19 mm th IS-710 ply+ 4 mm th Veneer gurjan base ply with require edge

finish teak wood/SS as per architect suggestion. Side storage: Storage body is made of 19mm IS-

5 710 ply with veneer finish and inner side 1.5 mm thick laminate finish including require nos of 2.00 107252.91 No.

drawer and shutter all type of fittings , fixtures, hardware

Hettich/Haffle make etc complete .SS 304 grade conceal handle shall be provide as per approved

unit(500x500X545):Pedestal bodys made of 19mm IS-710 ply with veneer finish and inner side

1.5 mm thick laminate finish including require nos of drawer with all type of fittings , fixtures,

hardware Hettich/Haffle make etc complete .SS 304 grade conceal handle shall be provide as per

Main Table top : 2000(L) x 1050(W) x 750 (H)mm

Side table - 1050 (L)x 600(W) x 750 (H)mm

side table unit -510 mm Di

4.Wire management: one way or two way open able flip top box mounted on table top squeeze

:A special flexible rubber component that allows easy and safe passage of wires.

5.Writing pad: Made from approved leather finish with require accessories

Providind and Arranging Medium Back Chair - Seat & back cushioned on ply, aluminum

die casted arms with cushioned pad, Synchro mechanism with single back lock , gas lift

, chrome base.Including all materials and labour etc.complete as per detail drawing

6 and instruction of engineer-in charge.Size : max.Height 1070mm, Min.970mm,Seat: 29.00 13328.97 Nos.

490mm x 510 mm,Back : 640 mm x 510 mm

Medium Back Chair

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Arranging Cushioned Seat & back, PP outer back cover, PP arms, Single

back lock, Push back mechanism, gas lift for seat height adjustment, five prong Nylon

base with twin wheel nylon castor.Including all materials and labour etc.Complete as

7 per drawing and instruction of engineer-in charge.Size : Max.Hight 1020mm 30.00 6318.56 Nos.

Min.Height 930 mm, Seat : 500mm x 460mm , Back: 500mm x 440 mm

Low Back Chair :

(2 Seater sofa - Custom Made Sofa) : 2100mm (L) x 750 mm (B) x 750 mm (H), The seat

shall 150 mm th 40 density & back shall be 32 density foam & finished in Approved

fabric upholstery as per the drawing/image and instruction from Architect/EIC all

external & internal exposed woodwork to be finished in PU semi gloss finish polish.

.The work shall be done as per the approved shop drawing (to be prepared by

contractor), specifications, sample approved and as directed by the Architect and

Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour,

wastages, necessary tools & tackles,approved make for all floors, all heights, all levels

and all places within campus. Contractor shall do all the needful and shall fulfill

Architect's design intent. No additional claims will be entertained for this. Rate shall

inclusive of shop drawing ,mock up sample, all materials, loading, unloading, all taxes,

transportation, placing at all floors and for all leads,all accessories as described in item

description.As approval of architect.

(2 Seater sofa - Custom Made Sofa) :2100mm (L) x 750 mm (B) x 750 mm (H)

Providing and Arranging corner table made from 37mm x 37 mm Indian teakwood leg

and top frame made from 37mmx 75mm Indian teakwood having 18 mm thick Ply and

4mm thick Veneer with melamine polish and 0.8mm thick balancing laminate at

bottom for shelf made with surrounding Indian teakwood frame of size 37 mm x

9 mm the top having 12 mm thick glass with edge finish to be placed properly in groove 4.00 3192.65 Nos.

made. Surface to be finished with melamine polish Including all materials and labours

etc. complete as per drawing and instruction of engineer-in charge.

Corner Table : size - 600mm x 450mm x 450mm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and Arranging Center table made from 37mm x 37 mm Indian teakwood leg

and top frame made from 37mmx 75mm Indian teakwood having 18 mm thick Ply and

4mm thick Veneer with melamine polish and 0.8mm thick balancing laminate at

bottom for shelf made with surrounding Indian teakwood frame of size 37 mm x

10 mm. The top having 12 mm thick glass with edge finish to be placed properly in groove 4.00 4433.90 Nos.

made. Surface to be finished with melamine polish including all materials and labours

etc. complete as per drawing and instruction of engineer-in charge.

Center Table : size - 900mm x 600mm x 450mm

Supplying ,Fixing and commissioning of TV Cabinet Providing and fixing at site TV

Cabinet of approved design & Drawings to be made up of 18.0mm BWP Ply, and

11 finished with approved shade of Laminated finish, including all accessories, space for 16.00 9373.81 SQm

fixing of TV, Necessary shelves, all accessories etc complete

Providing & fixing Wooden cupboard size Custom and depth 0.60 mt using 12mm thick

plywood all proof, on back side both side top bottom and shelves are of 19 mm thick

ply & shutters are of 12mm thick ply all proof with teakwood batten & 1 mm

lamination in single or double shade & colour as directed on all visible face and

mm lamination on all non visible faces including SS fixtures & fastening, Godrej lock

etc. good quality as directed by engineer-in-charge etc. complete.

Wooden Cupboard : size - Depth 600mm

Over hed File Storage Unit :- Size Custom Length and Depth 600mm Providing and

Arranging Overhaed Unit with top 18mm overall thickness made from 18 mm thick MR

grade plywood with 1.00 mm thick Laminate finished polish. Side made of 18mm thick

MR grade plywood with 1.00 mm thick Laminate finish and inside 0.8mm thick

balancinglaminate of approved shade. Godrej make lock with Two keys and shutter

13 fixed with auto hinges including . all necessary fixtures and fastening as approved and 11.00 8373.91 SQm

back of the unit with 6mm thick MR grade playwood with 0.1 mm thick laminate of

approved shade with nylon bullet including all materials and labour etc. Complete as

per drawing and instruction of Engineer-in charge

Over hed File Storage Unit : size - Depth 600mm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

FlutedWall PANELING With Polish/PU Finish: Providing & fixing with Sheet metal

screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by filling

required size wedges /washers/ MS wall connectors or packings of teak wood /MS

14 washers to ensure right angles and plumb level. Fluted panel,adhesive ,tape, headless 50.00 4374.31 SQm

nails etc ,finished with Polish/PU paint & in pattern as shown in the drawing. Rate shall

be inclusiveg grooves etc complete as per drawing or as directed by EIC/ Architect.

Providing and fixing of planter/pots of frp or plastic with artificial indoor plants as per

Engineer-in charg

Providing and Fixing Blackout Roller Blinds with fabric of 0.53mm thickness and Top

channel of non-rusting aluminium alloy with 1.25mm thickness and bottom channel of

1.50mm thickness & 21mm diameter. Tilt channel of ABS plastic with 1.50mm polyster

16 cord with 4.50mm balls with stop lock arrangement including all necessary fixture, 156.11 2392.69 Sqm

fastners, fittings, labour material machinary etc complete as seletced and diretced by

Engineer Incharge. Roller Blinds

Providing and Fixing fiber acoustic false ceiling of size 595 x 595 x 20mm thick is made

fine micro glass fibre as per the below mentioned specifications. Colour: Plain White,

Black, Core: Soft fiber, suspended celling system which includes silhout main-T of size

38x15x0.35mm at every 1200 c/c and cross T of size 38x15x0.35mm are fixed to Main

T at 1200/600 mm c/c. Wall angle of size 22x22x0.40mm then fixed along the

perimeter of wall with the suitable fasteners. The suspension is done with all

accessories like Soffit cleat, levelling clips & wire rods as per dwgs. T-Grid System.

Characteristics: 0.9 NRC broadband sound absorption, highest for modeular ceilings.

White surface finish with fine monoilthic texture for high light reflectance, less lighting

requirements. Black surface for full light absorption. At 1.5-3kgs/m2, does not

contribute significantly to structural load of building including all accessories, material

& labor complete as directed by Architect / Enginee

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing Key Board pull out tray made out of high quality foil pressed on pre-

laminated MDF with side mouse pad tray having height adjustment on mounting

brackets with smooth sliding operation and with removable drawer with latches having

18 load carrying capacity of 12.00 kg incl. all necessary fixtures, fasteneres , labour and 16.00 1174.63 Nos.

material as diretced by Engineer-in-charge.

Key Board Tray (705 x 284 mm size)

Providing and fixing Telescopic CPU stand made from M.S slim stores CPU under the

table with soft anti vibration pads and adjustment width of 45mm to 100 mm having

height adjustment from 310mm to 530 mm and safe load carrying capacity of 20.00 kg

19 finished with powder coating of 50 micron thickness incl. all necessary fixtures , 16.00 575.70 Nos.

fasteneres , labour and material as diretced by Engineer-in-charge.

CPU Trolley

Providing and Arranging FOOT REST made up of high impact polystyrene having over all

size 450 mm x 350 mm with tilts of 0o to 20o for angular movement and non slippary

20 platform surface including all materials and labour etc. complete as per drawing / 4.00 1232.20 Nos.

Photographs and instruction of engineer-in charge.

Providing and Arranging three seater gang seater having seat and back made from

CRCA capsular Tubular frame welded with perforated Die moulded CRCA sheet. base

frame made from round Tubular welded with horizontal beam Two side armrest

21 welded with frame including finishing metal parts with epoxy polyester powder 6.00 17030.62 Nos.

coating of 50 micron thickness Including all materials and labour etc. Complete as per

drawing and instruction of engineer-in charge

Removing dry or oil bound distemper by a washing and scraping and sand papering the

22 wall surface smooth including necessary repairs to scratches complete. 6915.00 11.53 Sqm

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

23 materilas and disposal of unserviceable materials with all lead and lift. 520.00 49.11 sqm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

them within all lead and lift.(ii) Exceeding 3 Sq.M. in area..(S O R Peg no.150 item

Dismentling steel work including distempering and stacking the materials with all lead

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

27 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft 75.00 122.93 Cum

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to

give an required shape even shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or

equivalent & two coats of primer of approved brand and manufacture on new wall

29 surface to give an even shade including thoroughly brushing the surface free from 5486.00 40.59 Sqm

mortar dropping and other foreign matter and sand papered smooth

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and sand

papered smooth.

Carring out plinth treatment to post construction / existing structure by spraying

chemical solution for termite control treatment including labour and material

consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

31 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC 1748.00 59.45 Sqm

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended

as per I.S .

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing Four track sliding window standard extruded color anodized

aluminum section equivalent to jindal series E (30mm) section numbers frame bottom

track 21198 frame top & sides 21204, shutter & bottom top rail 20993, side rails

205553, interlock rails 20550. with Three Shutter 5 mm thick transparent Tinted Float

glass, and Two shutter with Stainless Steel Wiremesh shutters {In Single Track}, rubber

32 gasket, air lock strip and finishing joints with silicon sealant, with standard extruded 135.00 5562.07 Sqm

colour anodized aluminium coated fittings and fixture & fastening etc complete.

{Colour as directed by Engineer in charge & Aluminium section shall be Jindal or

equivalent brand and glass of Modiguard, AIS or equivalent brand (As Per RA)

Providing and fixing Three track sliding window standard extruded color anodized

aluminum section equivalent to jindal series C (30mm) section numbers frame bottom

track 21203 frame top & sides 20387, shutter & bottom top rail 20993, side rails

205553, interlock rails 20550. with Two Shutter 5 mm thick transparent Tinted Float

glass, and one shutter with Stainless Steel Wiremesh shutters {In Single Track}, rubber

33 gasket, air lock strip and finishing joints with silicon sealant, with standard extruded 22.00 6078.18 Sqm

colour anodized aluminium coated fittings and fixture & fastening etc complete.

{Colour as directed by Engineer in charge & Aluminium section shall be Jindal or

equivalent brand and glass of Modiguard, AIS or equivalent brand (As Per RA)

Providing and Fixing Machine cut, free edges, machine polished Granite stone slab

mm thick for Doors/Windows Cill and Jambs cladding as per design including full

molded round front edge and 1 cm nosing and laid on 10 mm thick cement mortar 1:3

( 1 cement:3 coarse sand) jointed with grey cement slurry including rubbing and

polishing finishing etc complete. (As Per RA)

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc.

35 with M.S. flats at required spacings and frame alround, square or round bars with 3903.00 106.23 KG

round headed bolts and nuts or by screws (A) Plain Grill.

Painting two coats (including priming coat) on new steel and other metal surface with

36 synthetic enamel paint, brushing to give an even shade including cleaning the surface 157.00 105.31 Sqm

of all dirt, dust and other foreign matter.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Repairing and Refixing existing window/door providing & fixing necessary all fixtures

and fastening cutting edges for smooth opening, damaged part of glass and Wooden

member like bottom rail,style and shutter galass etc. and closing including fixing the

shutter on stone / wooden / MS frame with labour including cutting bottom edge of

door to match with flooring with necessary repairing to frames etc. complete

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected fire retardant grade polyurethene foam

done in situ alongwith embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings & fastener sleeve.

Providing and fixing 25 cm Wide & 3mm thick exterior composite panel on existing

39 expansion joint horizontally & vertically with all material, hardware, acessories & 4.00 1054.33 Sqm

fittings etc completed.

Providing and filling the expansion joint by Thioflex 600 polymer or equivalent confirm

to BS 4254-1983 as per required shade and manufactured specifi-cation by making

groove of 50 mm x 12.5 mm lather by cutting or by repairing groove and removing

mortar drop or any other foreign materials including applying primer and filling

required size (oversize of joint PU foam etc. complete.

Providing and laying machine cut free edges, machine polished Granite ( single piece

not more than 1.50 mt) of even grade 18 mm (Average) thick for steps and riser as per

design incl. rounded front edge & 1 cm nosing in trade of steps laid on 20 mm thick

cement mortar 1:6 (1 -cement : 6 coarse sand ) on treads & 10 mm thick Cement

mortar 1:3 for risers, jointed with grey cement slurry including 3 nos of 1mm Grooving

and rubbing

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing sandwich type granite 18 mm thick cooking platefom of 60 cm width and

cm height including 25 mm thick polish kota stone at bottom of granite and bottom

flooring using 20 mm thick C.M.1:6 including vertical and bottom polish kota stone for

42 kitchen sink,granite panipatti and vertical support for granite,all labour and material 4.00 6001.42 Sqmt

half round moulding etc.complete as per design excluding cost of kitchen sink and

vertical,horizontel support and shelves for storage.

Providing and fixing AISI 316 Grade stainless steel knock down railing system

comprising 50mm dia railing fixed on 38mm dia SS Balustrade of 900mm height placed

at maximum 1200mm C/C distance along with three SS horizontal mambers of 19mm

dia connected at the side of balustor with SS brackets. The balustrade shall be

43 mounted on floor with base plate using specially designed anchor fasteners and 24.00 4289.47 Rmt.

concealed by AISI 316 Grade SS base cover cap (Wall thickness of pipes shall be taken

as 1.50mm along with all visible component developed in high grade SS and wherever

required, joints to be filled with bushings for extra strength).

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by

44 adhesive material including dismentaling of existing flooring and jointed with color 431.00 1264.40 SQm

cement slurry including finised with flush pointing & cleaning the surface etc. complete

for light shade

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps

45 and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed 33.00 1195.02 Sqmt

with white cement slurry

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /

mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.

Providing and layingmachine cut free edges, machine polished Granite slab flooring

over 20mm (average)base of cement mortar 1:6 (1-cement : 6coarse sand) or L.M.

47 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement slurry 27.00 2354.31 Sqmt

including rubbing and polishing complete. (A)Granite Slab (18 mm thick)

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and laying machine cut free edges, machine polished Granite ( single piece

not more than 1.50 mt) of even grade 18 mm (Average) thick for steps and riser as per

design incl. rounded front edge & 1 cm nosing in trade of steps laid on 20 mm thick

cement mortar 1:6 (1 -cement : 6 coarse sand ) on treads & 10 mm thick Cement

mortar 1:3 for risers, jointed with grey cement slurry including rubbing

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40)

for cold water including fittings make as approved by Engineer In Charge. Pipe shall

be fixed on the wall with the help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x

mm heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

polythene pipes of the following outside Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including making good the wall ceiling and

floor.(F) 75mm.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali

of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls.

Providing and fixing wash basin with single hole for pillar tap with C.I or M.S. brackets

painted white including cutting holes and making good the same including fitting (A)

Vitreous china : (II) Flat back Wash basin 550mm x 400mm size in white colour

including providing and fixing M.I. fisher union, C.P. Brass waste coupling 32 mm dia

and . Rubber Plug ,C.P. brass pillar tap of 15 mm dia. with capstain head C.P.Brass

Bottle Trap etc complete

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including

cutting holes in walls and making good the same but excluding fittings. SS Sink Glosy

ASIS 304 Grade x 1mm thick with over all size 510x432mm & bowl size 445x368x190

Providing and fixing wash down white vitreious china water closet EUROPEAN TYPE

W/C PAN of size 555x360x390mm (Standared Company) Make with intergal "P" or "S"

57 trap including jointing the trap with pan and soil pipe in vitereous china white colour. 1.00 3228.97 Each

Rate inclusive of providing and fixing PVC Flush Tank & Soft seat cover of the same

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia.

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted

62 on 6mm thick AC sheet or plywood sheet and fixing to wooden pluge with CP brass 1.00 859.40 Each

screws and washers.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing and fixing CP Brass towel rail complete with CP Brass brackets fixed to

wooden plug with CP brass screws (B) 600mm x 20mm size.

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less

than 35Kg.

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required

65 capacity each with all necessary fittings and connection etc. complete on terrace. 5000.00 3.94 Ltr

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

66 materials and disposing off the excavated stuff upto 50 Meter lead.(C) Hard Murrum 71.00 268.92 Cum

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- Crushed

67 stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork 71.00 3388.55 Cum

in (A) Foundation and Plinth

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and

68 as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for 707.00 706.92 Sqmt

levelling and filling the joint with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc. Complete.

Total Civil Work =

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (green) both are of ISI marked 1.1 kV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be erected complete with earth

continuity and necessary connection with primary light with accessories erected on

Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet

69 for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector 12.00 158.57 Pt.

as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for

Secondary Point.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Replacing old and unserviceable by new Point wiring for Light / Bell with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 kV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

Replacing old and unserviceable by new Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 kV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator mounted

and accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

Replacing old and unserviceable by new Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type accessories

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Replacing old and unserviceable by new Providing following type of Modular Type

Accessories mounted with PVC / metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate , modules erected with necessary

73 connections as per site situation directed by Engineer In charge. 80.00 25.25 Ea.

(7) Blank Plate Single

(8) Computer RJ-45 socket

(9) 16 Amp. SP one way switch

(10) 6/16Amp. Universal socket

Replacing old and unserviceable Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed

78 (c) 32 mm 220.00 54.54 Mtr.

Supply & installation of modular type accessories for U PVC snap-on adaptable

trunking/Pop up Box with required items erected with necessary connection. As

desired by Engineer In charge

vi) Cat-6 LAN Socket cat-III

Replacing old and unserviceable by new Providing and erecting Mains with 1.1 kV

grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

80 conductor FRLS PVC insulated stranded wire of green colour for earth continuity of 2600.00 104.03 Mtr.

following size

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Replacing old and unserviceable by new providing and erecting Mains with 1.1 kV

grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type

of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

81 insulated stranded wire of green colour for earth continuity of following size 295.00 140.39 Mtr.

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

(A) with medium class Rigid PVC pipe and accessories

(b) 2 wire 6 sq. mm

(A) with medium class Rigid PVC pipe and accessories

(h) 4 wire 6 sq. mm

Providing and erecting Mains with ISI marked, 1.5kV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required.

(d) One wire 4.00 sq. mm

85 (e) One wire 6.00 sq. mm 48.00 70.70 Mtr.

86 (f) One wire 10.00 sq. mm 36.00 115.14 Mtr.

87 (g) One wire 16.00 sq. mm 12.00 177.76 Mtr.

88 (i) One wire 35.00 sq. mm 8.00 376.73 Mtr.

89 (l) One wire 95.00 sq. mm 4.00 1149.38 Mtr.

Replacing old and unserviceable by new Supplying & erecting approved make LAN

90 cable of following size in existing pipe as per direction 1600.00 47.47 Mtr.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Replacing old and unserviceable by new Providing & erecting Switch board for

Computer or electric apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single mounting base frame

covered with textured/metallic /white front plate,modules erected with necessary

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Replacing old and unserviceable by new Decorative call bell Ting-tong box type

volts complete erected

Replacing old and unserviceable by new Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

93 LED driver efficiency > 85 % 14.00 165.64 Ea.

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 kV, IP-20, conventional 1 to 2 feet

(A) Tube Light with integral driver

94 (iv) 22-24 Watts, Surge - 2kV,IP-20, conventional 4 feet 282.00 373.70 Ea.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to

housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2kV

Replacing old and unserviceable by new Providing and erecting Approved make Four

pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic

96 release suitable to work on A.C. supply 50 Hz. with all internal connections, spreader 8.00 6790.23 Ea.

tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Replacing old and unserviceable by new Providing and erecting Approved make Four

pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & magnetic release suitable to

97 work on A.C.supply 50 Hz. with all internal connections, spreader tinned copper & 2.00 8861.74 Ea.

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Replacing old and unserviceable by new Providing and erecting Approved make Four

pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and above at

415 V . having normal current rating 250A. with variable thermal & magnetic release

98 suitable to work on A.C.supply 50 Hz. with all internal connections, spreader tinned 1.00 23041.13 Ea.

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Replacing old and unserviceable by new Supplying and erecting triple pole & neutral

440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for phase sequence of following current

99 0.80 3202.71 Rn.Mtr.

carrying capacity, erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with necessary connections.

(B) Suitable for 200 Amp. capacity

100 (C) Suitable for 300 Amp. capacity 1.00 4909.61 Rn.Mtr.

Replacing old and unserviceable by new providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having

101 breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with 142.00 123.22 Ea.

Replacing old and unserviceable by new Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve) having 10 KA breaking capacity &

102 confirms to IS : 8828 in existing box having following capacity 12.00 362.59 Ea.

(B) 40 Amp. Cat.III

Replacing old and unserviceable by new Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

(c) 63 Amp. Cat.III

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Replacing old and unserviceable by new Providing and erecting Sheet Steel powder

coated MCB distribution board - flush / surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to

house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to

be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(A) single phase incoming and horizontal single phase outgoing

105 (b) sheet steel double door (IP-43) 4.00 1680.64 Ea.

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation

type (PPI)

(b) sheet steel double door

Replacing old and unserviceable by new providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as directed

(ii) 40Amps. DP

Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the value of earthing resistane

109 mentioned in test Certificate) & having back filling compound of (B) Inner chemical 2.00 4591.46 Ea.

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary test

report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection as per

approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors,

110 handles with locking arrangement and rubber gasket,heavy duty end terminal 2.70 10468.65 Sq. Mtr.

connection,danger notice board,necessary ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following approved manufacturers with

following size.

(A) locally fabricated panel board

(i) with 350 mm depth

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly painted with one coat of red

oxide with erection on site as per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

Replacing old and unserviceable by new Providing and erecting FRLS-XLPE(IS:7098)(I)-

88 ISI armoured cable multistrand Aluminium conductor for 1.1 kV. to be laid on wall

112 with necessary clamps or in existing trench / pipe of following size of cables 20.00 589.84 Mtr.

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

113 (H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) 15.00 1085.75 Mtr.

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Replacing old and unserviceable by new Providing and erecting FRLS-XLPE (IS:7098)(I)-

88 ISI armoured cable multistrand Aluminium conductor for 1.1 kV. to be laid on wall

114 with necessary clamps or in existing trench / pipe of following size of cables 30.00 184.83 Mtr.

(A) 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC

insulated armoured cable complete with out going tails, insulating tape etc for

following size of cables.

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable

gland with rubber ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(D) 3 & 1/2 core 95 Sq. mm

117 (G) 3 & 1/2 core 185 Sq. mm 2.00 238.36 Ea.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

118 terminals with brass/cadmium plated nut bolts in an approved manner. 8.00 15.15 Ea.

Replacing old and unserviceable by new Providing & erecting Approved make Power

Saving 45 - 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser

122 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with 138.00 1948.29 Ea.

, canopy & 30 cm. down rod erected with earthing.(Make shall be approved by

Engineer in charge))

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCC slab with

Making the site as original.

Supplying & erecting approved make low noise decorative exhaust fan having square

124 frame ABS body with inbuilt lowers & square frame. 4.00 1366.53 Ea.

200mm with 1350RPM Cat.II

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Supplying and erecting approved make panel mounting type Digital Voltmeter having

digits LED display, 0 to 750 AC Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having

digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to

126 operate on 500 Volt AC , erected on existing panel board with all connection, wiring 2.00 1558.43 Ea.

etc .with manufacturers calibration certificate.

500 V on existing panel board with necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio

128 15 VA burden erected in existing CRCA box duly secured with insulating materials 6.00 274.72 Ea.

connected to the meter

Supplying and erecting approved make suitable panel indicator LED type lamp, lens

cover, complete erected with necessary connections.

Total Electrical Work =

(Civil Work+ Electrical Work) Total =

I / Weam / are willing to carryout the work at………………………. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Deduct…….……% below Add……..…% Above

Net……………………….. Net……………………………

In words………………….. In words………………………..

Description of Item Rate in

Item. No. Quantities Unit Amount

(with brief specification and reference to book of specifications) Figure

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In – Charge for which no extra

payment shall bemade

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017 Cement Consumption/16/C

Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Note 5 :- Credit amount Rs.1,24,071.76 of dismanteled material Deducted in 1 St RA Bill

( Civil Work Rs.67,088.00 + Eletric Work Rs 56,983.76)

Signature of Bidder Executive Engineer

R&B Division