Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC D NO 39 33 88 2 PLOT NO MIG 208 MADHAVADHARA VUDA COLONY VISAKHAPATNAM 530018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | L1 | Accepted-AOC THE LOWEST BIDDER | |
| 2 | L2₹20.0 L+₹44,494.11 (2.28%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 3 | L3₹20.0 L+₹48,256.56 (2.47%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 4 | L4₹20.0 L+₹52,025 (2.67%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 5 | L5₹20.1 L+₹56,077.32 (2.87%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
| Sl No | Description | Qty | Unit | SRI DHANESWARI ENGINEERING WORKS L4 | JAHNAVI ASSOCIATES L5 | SRI VENKATA SAI MANIKANTA CONSTRUCTIONS L6 | SRI SAI MANIKANTA ENTERPRISES L8 | YVR CONSTRUCTIONS L7 | SRI LAKSHMI GANAPATHI CONSTRUCTIONS L2 | RAVI VARMA JAMPANA L1 | G VENKATA RAO L9 | HARSHA CONSTRUCTIONS AND ENGINEERING WORKS L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M & L for cleaning of surface thoroughly from dust & dirt and cement slurry @ 3 Kg / Sqm shall be applied thoroughly. The provide 10 mm thick screed bed in CM 1:4 mixed with integral water proofing compound as per manufacturer's instructions, after setting and drying cement mortar, the entire surface of the roof slab shall be cleaned thoroughly to remove all loose particle / dust / dirt particle and applying a coat of hot blown grade bitumen primer grade 85 / 25 @ 1.20 Kg Par Sqm shall be applied over priming surface. APP based polymeric membrane of minimum weight 3 Kg/Sqm and a minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150gms/Sqm) shall be laid on roof and on vertical surface upto and insert in grooves and packed in CM (1:3) with overlaps in membrane 100mm, The over laps shall be sealed by flames or as per manufacturer's instructions. and finally it will be finished with two coats of bituminous based aluminium paint including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed.
(Note: Integral water proofing compound shall be measured and paid separately in Supply only item.) | 170 | Sqm | 750 ₹1,27,500 | 1,600 ₹2,72,000 | 1,760 ₹2,99,200 | 2,200 ₹3,74,000 | 1,610 ₹2,73,700 | 655 ₹1,11,350 Lowest | 1,888 ₹3,20,960 | 1,200 ₹2,04,000 | 1,600 ₹2,72,000 |
| 2.00 | M&L for repairing sunken floor leakage as per following steps complete all as specified and directed:-
Surface preparation:
(i) The surface shall be clean thoroughly by scarifying, grinding, water jetting and sand blasting etc to make free from all the dust ,foreign particles, loose aggregate and oil grease etc.
(ii) All the depression or pin holes/pot holes to be repaired using acrylic polymer based composite waterproofing system method mortar in mixing ratio of (1 kg cement: 1.50 kg silica sand : 0.50kg of acrylic polymer based composite waterproofing system)
(iii) The surface should be wetted thoroughly with water prior to application to get SSD (saturated surface dry) condition.
Coating application:
(i) }}Mix Cement with acrylic polymer based composite waterproofing material in ratio of 1 : 0.50 ( 1 kg cement OPC53 : 0.50 acrylic polymer based composite waterproofing material ) by weight.
(ii) The mix should be stirred thoroughly until smooth homogeneous paste is obtained
(iii) Apply first coat over SSD /wet condition substrate
(iv) Apply and unroll woven glass fibre cloth evenly on the wet coating before it dries out on larger areas
(v) Using a nylon brush, apply one coat of acrylic polymer based composite waterproofing system coating over the glass fabric so as to cover the
fabric, allow 5-6 hours of air drying before application of another coat of acrylic polymer based composite waterproofing system slurry coating over
the surface.
(vi) Provide polymer modified protective plaster of 15-20 mm thick over the coating to ensure safety from mechanical damage.
Curing:
(i) Allow acrylic polymer based composite waterproofing system coating to air cure for 3-6 hours after the final coat.
(ii) Rapid drying of the coating by covering the coating with help of polythene sheet in case of high humidity and windy condition is not acceptable.
(iii) Following the moist curing, acrylic polymer based composite waterproofing system coating shall be allowed to air cured for 3 days before
submerging it in water. | 10 | Sqm | 1,100 ₹11,000 | 4,000 ₹40,000 | 2,800 ₹28,000 | 2,400 ₹24,000 | 850 ₹8,500 | 3,500 ₹35,000 | 808 ₹8,080 Lowest | 1,800 ₹18,000 | 5,500 ₹55,000 |
| 3.00 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed. | 10 | Each | 250 ₹2,500 | 207 ₹2,070 | 165 ₹1,650 | 180 ₹1,800 | 100 ₹1,000 Lowest | 200 ₹2,000 | 250 ₹2,500 | 120 ₹1,200 | 200 ₹2,000 |
| 4.00 | S & F WPC Door Frame 95x45 mm including all fitting making good after complete as directed as speicifed Make : Rajshree or equivelent printed colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. | 50 | RM | 1,100 ₹55,000 | 630 ₹31,500 | 900 ₹45,000 | 1,200 ₹60,000 | 950 ₹47,500 | 650 ₹32,500 | 400 ₹20,000 Lowest | 1,100 ₹55,000 | 600 ₹30,000 |
| 5.00 | S&F 35 mm thick WPC Door including making good consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour WPC ‘C’ channel having a WPC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour WPC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour WPC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitableWPC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. | 20 | Sqm | 3,600 ₹72,000 | 3,150 ₹63,000 | 6,800 ₹1,36,000 | 6,400 ₹1,28,000 | 3,200 ₹64,000 | 2,600 ₹52,000 Lowest | 3,555 ₹71,100 | 4,000 ₹80,000 | 3,500 ₹70,000 |
| 6.00 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m complete all as specified and directed. | 8 | Cum | 650 ₹5,200 | 999 ₹7,992 | 650 ₹5,200 | 570 ₹4,560 | 850 ₹6,800 | 320 ₹2,560 Lowest | 500 ₹4,000 | 380 ₹3,040 | 800 ₹6,400 |
| 7.00 | M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. | 8 | Cum | 5,600 ₹44,800 | 6,030 ₹48,240 | 4,790 ₹38,320 | 4,550 ₹36,400 | 5,000 ₹40,000 | 4,000 ₹32,000 Lowest | 4,850 ₹38,800 | 4,900 ₹39,200 | 6,500 ₹52,000 |
| 8.00 | M & L for rendering 15 mm thick cement plastering on wall surfaces in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). | 80 | Sqm | 320 ₹25,600 | 270 ₹21,600 | 260 ₹20,800 | 280 ₹22,400 | 250 ₹20,000 | 289 ₹23,120 | 262 ₹20,960 | 280 ₹22,400 | 240 ₹19,200 Lowest |
| 9.00 | Supply only integral liquid water proofing compound. | 6.02 | Kg | 60 ₹361.44 Lowest | 144 ₹867.46 | 78 ₹469.87 | 89 ₹536.14 | 130 ₹783.12 | 100 ₹602.4 | 60 ₹361.44 Lowest | 90 ₹542.16 | 150 ₹903.6 |
| 10.00 | M&L for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as ecommended by the manufacturer all as specified and as directed (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ). | 80 | Sqm | 175 ₹14,000 | 126 ₹10,080 Lowest | 178 ₹14,240 | 199 ₹15,920 | 140 ₹11,200 | 175 ₹14,000 | 126 ₹10,080 Lowest | 180 ₹14,400 | 150 ₹12,000 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
3 Jul 2025, 6:00 pmClosed
GE(I)(CG) VIZAG
GE (I) (CG) VIZAG Military Engineer Services, CGWO Building, C/o Fleet Mail Office, Visakhapatnam - 530 014
REPAIR / MAINTENANCE OF SEEPAGE / LEAKAGE, SANITARY AND OTHER MISC B/R PETTY SERVICES TO MD ACCN AT ICGS VISAKHAPATNAM UNDER GE(I)(CG) VIZAG
2025_MES_714501_1
GE(I)CG/VIZ/TOKEN 24 OF 2025-26
Open Tender
Miscellaneous Works
Item Rate
270 days
VISAKHAPATNAM
DETAILS AS PER NIT OF THE TENDER
9 documents required · 9 mandatory
₹500
GE(I)(CG) VIZAG
₹40,000
Yes
15 Aug 2025
14 Jun 2025
5 Jul 2025
14 Jun 2025
3 Jul 2025
27 Jun 2025
Amount
M & L for cleaning of surface thoroughly from dust & dirt and cement slurry @ 3 Kg / Sqm shall be applied thoroughly. The provide 10 mm thick screed bed in CM 1:4 mixed with integral water proofing compound as per manufacturer's instructions, after setting and drying cement mortar, the entire surface of the roof slab shall be cleaned thoroughly to remove all loose particle / dust / dirt particle and applying a coat of hot blown grade bitumen primer grade 85 / 25 @ 1.20 Kg Par Sqm shall be applied over priming surface. APP based polymeric membrane of minimum weight 3 Kg/Sqm and a minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150gms/Sqm) shall be laid on roof and on vertical surface upto and insert in grooves and packed in CM (1:3) with overlaps in membrane 100mm, The over laps shall be sealed by flames or as per manufacturer's instructions. and finally it will be finished with two coats of bituminous based aluminium paint including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed. (Note: Integral water proofing compound shall be measured and paid separately in Supply only item.)
M&L for repairing sunken floor leakage as per following steps complete all as specified and directed:- Surface preparation: (i) The surface shall be clean thoroughly by scarifying, grinding, water jetting and sand blasting etc to make free from all the dust ,foreign particles, loose aggregate and oil grease etc. (ii) All the depression or pin holes/pot holes to be repaired using acrylic polymer based composite waterproofing system method mortar in mixing ratio of (1 kg cement: 1.50 kg silica sand : 0.50kg of acrylic polymer based composite waterproofing system) (iii) The surface should be wetted thoroughly with water prior to application to get SSD (saturated surface dry) condition. Coating application: (i) }}Mix Cement with acrylic polymer based composite waterproofing material in ratio of 1 : 0.50 ( 1 kg cement OPC53 : 0.50 acrylic polymer based composite waterproofing material ) by weight. (ii) The mix should be stirred thoroughly until smooth homogeneous paste is obtained (iii) Apply first coat over SSD /wet condition substrate (iv) Apply and unroll woven glass fibre cloth evenly on the wet coating before it dries out on larger areas (v) Using a nylon brush, apply one coat of acrylic polymer based composite waterproofing system coating over the glass fabric so as to cover the fabric, allow 5-6 hours of air drying before application of another coat of acrylic polymer based composite waterproofing system slurry coating over the surface. (vi) Provide polymer modified protective plaster of 15-20 mm thick over the coating to ensure safety from mechanical damage. Curing: (i) Allow acrylic polymer based composite waterproofing system coating to air cure for 3-6 hours after the final coat. (ii) Rapid drying of the coating by covering the coating with help of polythene sheet in case of high humidity and windy condition is not acceptable. (iii) Following the moist curing, acrylic polymer based composite waterproofing system coating shall be allowed to air cured for 3 days before submerging it in water.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and not exc 4.00 Sqm each complete all as specified and directed.
S & F WPC Door Frame 95x45 mm including all fitting making good after complete as directed as speicifed Make : Rajshree or equivelent printed colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F 35 mm thick WPC Door including making good consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour WPC ‘C’ channel having a WPC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour WPC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour WPC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitableWPC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m complete all as specified and directed.
M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed.
M & L for rendering 15 mm thick cement plastering on wall surfaces in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).
Supply only integral liquid water proofing compound.
M&L for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as ecommended by the manufacturer all as specified and as directed (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ).
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed.
M & L for Vitrified,ultra charged, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
M & L for Glazed, ceramic, coloured tiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings heads, shoes, bends, sawn-necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories).
S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
All as per description of item No 16 above but except pipe. (Note: Serviceable pipe retrived from item No. 15 shall be re-used.)
S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) bends of any radius and any type complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) bends complete all as specified and directed.
S&F in repairs 110 mm dia vent cowl complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks of capacity 1000 litres, double layer construction, ISI marked ,(Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one complete all as specified in SSR Part I and as directed.
S&F in repairs 20 mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repairs gun-metal, globe or gate valves of 20mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S & F in repair fancy type Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete complete all as specified and directed. Make: Jaquar Cat Part No. FUS-29037 or Equivalent make as per list of Makes in PS.
S & F in repair fancy type Two way Bib taps with wall flange, cromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make: Jaquar Cat Part No. FUS-29041 or Equivalent make as per list of Makes in PS.
S & F in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange complete all as specified and directed. Make: Jaquar Cat Part No. FUS-29281or Equivalent make as per list of Makes in PS.
S & F in repair CP Sink Cock with Provision for Connection to RO from rear side & Swinging Spout complete all as specified and directed. Make: Jaquar Cat Part No. FLR5355N or Equivalent make as per list of Makes in PS.
S & F in repair CP Basin Mixture Single Lever Tall Boy with 150mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses Make: Jaquar Cat Part No. FUS-29005NB or Equivalent make as per list of Makes in PS.
S&F in repair Overhead Shower 180mm dia Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified & directed.Make: Jaquar Cat Part No. OHS-1755 or Equivalent make as per list of Makes in PS.
S&F in repair Hand Shower 105mm dia Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System complete all as specified & directed.Make: Jaquar Cat Part No. OHS-1709 or Equivalent make as per list of Makes in PS.
S&F in repair of CP fancy type angular stop cock 15mm dia with wall flange complete all as specified & directed.Make: Jaquar Cat Part No.FLR-5053N or Equivalent make as per list of Makes in PS.
S&F in repair for PVC connections 15mm size with PMT nuts of length 600 mm complete all as specified & directed
S & F in repair Single Towel Rail 600mm Long, Stainless Stee complete all as specified & directed Make: Jaquar Cat Part No.ACN 1111SM or Equivalent make as per list of Makes in PS.
S & F in repair Toilet paper Roll Holder with Stainless Steel Flap complete all as specified & directed Make: Jaquar Cat Part No.ACN-1153S or Equivalent make as per list of Makes in PS.
S & F in repair Towel Rack with Lower Hanger (Stainless Steel) with hook complete all as specified & directed Make: Jaquar Cat Part No.AHS-1581H or Equivalent make as per list of Makes in PS.
S & F in repair Health Faucet spray with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified & directed Make: Jaquar Cat Part No.ALD-565 or Equivalent make as per list of Makes in PS.
S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. Complete all as specified and directed.
S&F in repair 32 mm dia flexible PVC waste pipe for basin, sink & urinal etc as fixed in repair.
S&F in repair vitreous China wash hand basin with pedestal, white, flat back, size 630 x 450 mm including brackets/rock bolt , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete.
S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.
S&F in repair plastic seat cover white for EWC, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S & F 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 20 mm CPVC pipes SDR 11 & plain SDR 11 including all fittings on walls(conceled) & ceiling or laid in floors for internal water supply complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 25mm CPVC pipes SDR 11 & plain SDR 11 including all fittings on walls & ceiling or laid in floors at height up to 4th storey complete all as specified and directed.
Demolition of concrete of any description below or above ground and in any position not otherwise specifically provided including removing the debries to outside of MD land, where directed.for complete all as directed.
M & L for 75 mm thick PCC 1:4:8, type D2, (using 40mm graded stone aggregate) as in sub- base floor finished the surface fair and rough to receive subsequent layer with and including necessary formwork complete all as specified and as directed.
M & L Machine pressed precast concrete interlocking paver block any shape prepared with grey cement and pigment of size confirming to IS 15658-2006 of 60 mm thick M-35 Grade laid over sand cushioning layer complete all specified and directed. (Note: Sand cushioning shall be measured and paid in relevant item.)
M&L for sand filling under floors or in foundations including watering and consolidation for cushioning complete all as specified and as directed.
M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 including necessary formwork complete all as specified and directed.
SRI LAKSHMI GANAPATHI CONSTRUCTIONS (BID ID -3345876)
HARSHA CONSTRUCTIONS AND ENGINEERING WORKS (BID ID -3345084)
SRI DHANESWARI ENGINEERING WORKS (BID ID -3345220)
JAHNAVI ASSOCIATES (BID ID -3345904)
SRI VENKATA SAI MANIKANTA CONSTRUCTIONS (BID ID -3346149)
YVR CONSTRUCTIONS (BID ID -3345676)
SRI SAI MANIKANTA ENTERPRISES (BID ID -3346070)
G VENKATA RAO (BID ID -3346106)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .