Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹10.3 L+₹3.6 L (54.9%)Rejected-Finance R O VILLAGE NALAG P O PAHAL SUB TEH SUNI DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | L2 | Rejected-Finance Reject | |
| 3 | L3₹10.3 L+₹3.7 L (55.3%)Rejected-Finance | L3 | Rejected-Finance Reject | |
| 4 | L4₹11.6 L+₹5.0 L (75.0%)Rejected-Finance R O VILLAGE KHERI CHANGAN PO KANGTA FELOG TEHSIL DADAHU ST DISTT SIRMOUR HP | L4 | Rejected-Finance Reject | |
| 5 | L5₹12.1 L+₹5.5 L (83.5%)Rejected-Finance CHIYAMIMYANA PO KANSAR TEHSIL PAONTA SAHIB SIRMOUR HP | SIRMAUR | SIRMAUR | HIMACHAL PRADESH | L5 | Rejected-Finance Reject |
Tender Value
₹9.0 L
EMD Value
₹18,100
Closing Date
25 Aug 2021, 11:00 amClosed
Executive Engineer Jal Shakti Division Nahan
Executive Engineer Jal Shakti Division Nahan
C/o 4 Nos. anchor block and laying and jointing of HDPE pipe of 110 mm dia).
2021_HPIPH_51326_7
NHN-SMROO-722-TA-Tender- 6621-70 dated 16/08/2021
Open Tender
Pipe Laying Works
Item Rate
90 days
Nahan
Please refer Tender documents.
10 documents required · 10 mandatory
₹250
Executive Engineer Jal Shakti Division Nahan
₹18,100
Yes
18 Oct 2021
17 Aug 2021
25 Aug 2021
17 Aug 2021
25 Aug 2021
17 Aug 2021
Amount
Excavation in foundation & plinth in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of watering and then disposing of all surplus excavated earth with in all leads, lifts foundation etc. consolidating each deposited layer by ramming and complete in all respects and as directed by the Engineer Incharge.
Providing and laying cement concrete 1:2:4(1cement: 2app.sand:4app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforced for reinfoece concrete work in wall(any thickness not less than 0.1m thickness) attahced pillaster buttresses, plinth and string courses etc. from top of foundation level upto floor two level,including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..
Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.
a)Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses,plinth and string sources and the like.
Providing tor steel reinforcement for RCC work including banding, binding and placing in polsition complete upto floor two lelvel including all leads, and carriage of material at site and as directed by the Engineer Incharge.including cost of binding wires.
Excavation in drains and channels etc.in earth work in all kinds of soil such as Kankar Moorum,Shingles, Conglomerate saturated soil decomposed or soft rock & hard rock by blasting including dressing of sides and beds,disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of the Engineer Incharge.
Laying and jointing high density polythene pipe for use for buried water main and survicese and for water supply above ground both inside and out side building duly ISI marked ( IS 4984-1995 as ammended upto date ) of PE 63 of Pressure PN 2.5 of following dia metre complete in all respects.
( PN 2.5 Grade -63) 110mm dia.
Providing and fixing hydrant including PVC tee, socket , Elbow and C.I plug and PVC Alfa valves , including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..
KULDEEP SHARMA
OM PARKASH SHARMA
Chaman Lal Contractor
Deepak Kumar Contractor
Mohan Sharma
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .